diff -ruw linux-3.2.13/arch/Kconfig linux-3.2.13-fbx/arch/Kconfig --- linux-3.2.13/arch/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/Kconfig 2013-06-13 15:06:37.998519417 +0200 @@ -181,4 +181,28 @@ config ARCH_HAVE_NMI_SAFE_CMPXCHG bool +config HAVE_ARCH_SECCOMP_FILTER + bool + help + An arch should select this symbol if it provides all of these things: + - syscall_get_arch() + - syscall_get_arguments() + - syscall_rollback() + - syscall_set_return_value() + - SIGSYS siginfo_t support + - uses __secure_computing_int() or secure_computing() + - secure_computing is called from a ptrace_event()-safe context + - secure_computing return value is checked and a return value of -1 + results in the system call being skipped immediately. + +config SECCOMP_FILTER + def_bool y + depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET + help + Enable tasks to build secure computing environments defined + in terms of Berkeley Packet Filter programs which implement + task-defined system call filtering polices. + + See Documentation/prctl/seccomp_filter.txt for details. + source "kernel/gcov/Kconfig" diff -ruw linux-3.2.13/arch/x86/boot/early_serial_console.c linux-3.2.13-fbx/arch/x86/boot/early_serial_console.c --- linux-3.2.13/arch/x86/boot/early_serial_console.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/boot/early_serial_console.c 2011-11-04 14:26:06.415888633 +0100 @@ -26,11 +26,17 @@ unsigned divisor; outb(0x3, port + LCR); /* 8n1 */ +#ifndef CONFIG_X86_INTEL_CE outb(0, port + IER); /* no interrupt */ +#endif outb(0, port + FCR); /* no fifo */ outb(0x3, port + MCR); /* DTR + RTS */ +#ifdef CONFIG_X86_INTEL_CE + divisor = 921600 / baud; +#else divisor = 115200 / baud; +#endif c = inb(port + LCR); outb(c | DLAB, port + LCR); outb(divisor & 0xff, port + DLL); diff -ruw linux-3.2.13/arch/x86/include/asm/bootparam.h linux-3.2.13-fbx/arch/x86/include/asm/bootparam.h --- linux-3.2.13/arch/x86/include/asm/bootparam.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/include/asm/bootparam.h 2013-06-13 15:06:39.066518904 +0200 @@ -14,6 +14,12 @@ #define SETUP_E820_EXT 1 #define SETUP_DTB 2 +/* + * use a number that likely won't clash with newer extensions. + */ +#define SETUP_FBXSERIAL_EXT 0x42000001 +#define SETUP_FBXBOOTINFO 0x42000002 + /* extensible setup data list node */ struct setup_data { __u64 next; diff -ruw linux-3.2.13/arch/x86/include/asm/string_32.h linux-3.2.13-fbx/arch/x86/include/asm/string_32.h --- linux-3.2.13/arch/x86/include/asm/string_32.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/include/asm/string_32.h 2011-11-04 14:26:06.447888667 +0100 @@ -178,7 +178,7 @@ #ifndef CONFIG_KMEMCHECK -#if (__GNUC__ >= 4) +#if (__GNUC__ >= 4 && !defined(CONFIG_X86_INTEL_CE)) #define memcpy(t, f, n) __builtin_memcpy(t, f, n) #else #define memcpy(t, f, n) \ @@ -321,7 +321,7 @@ : __memset_generic((s), (c), (count))) #define __HAVE_ARCH_MEMSET -#if (__GNUC__ >= 4) +#if (__GNUC__ >= 4 && !defined(CONFIG_X86_INTEL_CE)) #define memset(s, c, count) __builtin_memset(s, c, count) #else #define memset(s, c, count) \ diff -ruw linux-3.2.13/arch/x86/include/asm/syscall.h linux-3.2.13-fbx/arch/x86/include/asm/syscall.h --- linux-3.2.13/arch/x86/include/asm/syscall.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/include/asm/syscall.h 2013-06-13 15:06:39.074518901 +0200 @@ -13,6 +13,7 @@ #ifndef _ASM_X86_SYSCALL_H #define _ASM_X86_SYSCALL_H +#include #include #include @@ -86,6 +87,12 @@ memcpy(®s->bx + i, args, n * sizeof(args[0])); } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ + return AUDIT_ARCH_I386; +} + #else /* CONFIG_X86_64 */ static inline void syscall_get_arguments(struct task_struct *task, @@ -210,6 +217,22 @@ } } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ +#ifdef CONFIG_IA32_EMULATION + /* + * TS_COMPAT is set for 32-bit syscall entries and then + * remains set until we return to user mode. + * + * TIF_IA32 tasks should always have TS_COMPAT set at + * system call time. + */ + if (task_thread_info(task)->status & TS_COMPAT) + return AUDIT_ARCH_I386; +#endif + return AUDIT_ARCH_X86_64; +} #endif /* CONFIG_X86_32 */ #endif /* _ASM_X86_SYSCALL_H */ diff -ruw linux-3.2.13/arch/x86/Kconfig linux-3.2.13-fbx/arch/x86/Kconfig --- linux-3.2.13/arch/x86/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/Kconfig 2013-06-13 15:32:49.049765324 +0200 @@ -75,6 +75,7 @@ select HAVE_BPF_JIT if (X86_64 && NET) select CLKEVT_I8253 select ARCH_HAVE_NMI_SAFE_CMPXCHG + select HAVE_ARCH_SECCOMP_FILTER config INSTRUCTION_DECODER def_bool (KPROBES || PERF_EVENTS) @@ -390,6 +391,11 @@ This option compiles in support for the CE4100 SOC for settop boxes and media devices. +config FBX6HD + bool "Freebox 6HD support" + depends on X86_INTEL_CE + select FBXSERIAL + config X86_WANT_INTEL_MID bool "Intel MID platform support" depends on X86_32 diff -ruw linux-3.2.13/arch/x86/kernel/early_printk.c linux-3.2.13-fbx/arch/x86/kernel/early_printk.c --- linux-3.2.13/arch/x86/kernel/early_printk.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/kernel/early_printk.c 2013-06-13 15:06:39.098518889 +0200 @@ -144,7 +144,9 @@ } outb(0x3, early_serial_base + LCR); /* 8n1 */ +#ifndef CONFIG_X86_INTEL_CE outb(0, early_serial_base + IER); /* no interrupt */ +#endif outb(0, early_serial_base + FCR); /* no fifo */ outb(0x3, early_serial_base + MCR); /* DTR + RTS */ @@ -154,7 +156,11 @@ baud = DEFAULT_BAUD; } +#ifdef CONFIG_X86_INTEL_CE + divisor = 921600 / baud; +#else divisor = 115200 / baud; +#endif c = inb(early_serial_base + LCR); outb(c | DLAB, early_serial_base + LCR); outb(divisor & 0xff, early_serial_base + DLL); diff -ruw linux-3.2.13/arch/x86/kernel/head32.c linux-3.2.13-fbx/arch/x86/kernel/head32.c --- linux-3.2.13/arch/x86/kernel/head32.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/kernel/head32.c 2013-06-13 15:06:39.098518889 +0200 @@ -46,6 +46,13 @@ } #endif +#ifdef CONFIG_FBX6HD + /* bootloader does not set subarch correctly, so we can't + * compile generic kernels, though we may be able to detect + * ce4100 at runtime */ + boot_params.hdr.hardware_subarch = X86_SUBARCH_CE4100; +#endif + /* Call the subarch specific early setup function */ switch (boot_params.hdr.hardware_subarch) { case X86_SUBARCH_MRST: diff -ruw linux-3.2.13/arch/x86/kernel/Makefile linux-3.2.13-fbx/arch/x86/kernel/Makefile --- linux-3.2.13/arch/x86/kernel/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/kernel/Makefile 2013-06-13 15:06:39.078518900 +0200 @@ -73,6 +73,7 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_ARCH_GEN3) += i2c-intelce.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_APB_TIMER) += apb_timer.o @@ -99,6 +100,9 @@ obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o obj-$(CONFIG_OF) += devicetree.o +obj-$(CONFIG_FBXSERIAL) += fbxserial.o +obj-y += fbxbootinfo.o + ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y) diff -ruw linux-3.2.13/arch/x86/kernel/ptrace.c linux-3.2.13-fbx/arch/x86/kernel/ptrace.c --- linux-3.2.13/arch/x86/kernel/ptrace.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/kernel/ptrace.c 2013-06-13 15:06:39.106518887 +0200 @@ -1379,7 +1379,11 @@ regs->flags |= X86_EFLAGS_TF; /* do the secure computing check first */ - secure_computing(regs->orig_ax); + if (secure_computing(regs->orig_ax)) { + /* seccomp failures shouldn't expose any additional code. */ + ret = -1L; + goto out; + } if (unlikely(test_thread_flag(TIF_SYSCALL_EMU))) ret = -1L; @@ -1406,6 +1410,7 @@ #endif } +out: return ret ?: regs->orig_ax; } diff -ruw linux-3.2.13/arch/x86/kernel/setup.c linux-3.2.13-fbx/arch/x86/kernel/setup.c --- linux-3.2.13/arch/x86/kernel/setup.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/kernel/setup.c 2013-06-13 15:06:39.106518887 +0200 @@ -428,6 +428,8 @@ { struct setup_data *data; u64 pa_data; + extern void parse_fbxserial_ext(struct setup_data *d); + extern void parse_fbxbootinfo(struct setup_data *d); if (boot_params.hdr.version < 0x0209) return; @@ -452,6 +454,14 @@ case SETUP_DTB: add_dtb(pa_data); break; +#ifdef CONFIG_FBXSERIAL + case SETUP_FBXSERIAL_EXT: + parse_fbxserial_ext(data); + break; +#endif + case SETUP_FBXBOOTINFO: + parse_fbxbootinfo(data); + break; default: break; } @@ -920,15 +930,15 @@ /* preallocate 4k for mptable mpc */ early_reserve_e820_mpc_new(); -#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION - setup_bios_corruption_check(); -#endif - printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", max_pfn_mapped<sim_reg.value & 0xfff00ff; + raw_spin_unlock_irqrestore(&pci_config_lock, flags); +} + static struct sim_dev_reg bus1_fixups[] = { DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write) DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write) @@ -144,6 +154,7 @@ DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write) DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write) DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write) DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write) DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write) @@ -161,8 +172,10 @@ DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write) DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write) DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write) + DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write) }; static void __init init_sim_regs(void) diff -ruw linux-3.2.13/arch/x86/platform/ce4100/ce4100.c linux-3.2.13-fbx/arch/x86/platform/ce4100/ce4100.c --- linux-3.2.13/arch/x86/platform/ce4100/ce4100.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/platform/ce4100/ce4100.c 2013-06-13 15:06:39.126518876 +0200 @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include @@ -21,12 +23,18 @@ #include #include #include +#include static int ce4100_i8042_detect(void) { return 0; } +static void ce4100_power_off(void) +{ + outb(0x4, 0xcf9); +} + #ifdef CONFIG_SERIAL_8250 static unsigned int mem_serial_in(struct uart_port *p, int offset) @@ -92,8 +100,11 @@ up->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); up->membase += up->mapbase & ~PAGE_MASK; + up->mapbase += port * 0x100; + up->membase += port * 0x100; up->iotype = UPIO_MEM32; up->regshift = 2; + up->irq = 4; } #endif up->iobase = 0; @@ -126,10 +137,72 @@ } #endif + +#ifdef CONFIG_FBX6HD + +#include +static const struct of_device_id remoti_ids[] __initdata = { + { .compatible = "ti,remoti" }, + { /* sentinel */ }, +}; + +extern int sdv_i2c_fixup_ck505(void); + +static int __init fbx6hd_init(void) +{ + int ret; + + panic_timeout = 10; + + ret = of_platform_bus_probe(NULL, remoti_ids, NULL); + if (ret) { + pr_err("failed to probe remoti platform bus\n"); + return ret; + } + + ret = crash_zone_of_init(); + if (ret) + printk(KERN_ERR " failed to register crashzone\n"); + + return ret; +} + +arch_initcall(fbx6hd_init); + +static char *__init fbx6hd_memory_setup(void) +{ + char *who = "fbx-rammap"; + u64 usable_mem_size; + + /* BIOS does not report correct ram size */ + usable_mem_size = 1024 << 20; + + /* + * acpi tables are at 0x10000 + * uc8051 code is running at 0x40000 + */ + e820_add_region(0x10000, 0x10000, E820_ACPI); + e820_add_region(0x20000, 0x40000 - 0x20000, E820_RAM); + e820_add_region(0x50000, 0x98000 - 0x50000, E820_RAM); + e820_add_region(HIGH_MEMORY, usable_mem_size - HIGH_MEMORY, E820_RAM); + + return who; +} + +static void __init fbx6hd_fixup_ck505(void) +{ + sdv_i2c_fixup_ck505(); +} +#endif + /* * CE4100 specific x86_init function overrides and early setup * calls. */ +#ifdef CONFIG_OF_EARLY_FLATTREE +extern void *__dtb_start; +#endif + void __init x86_ce4100_early_setup(void) { x86_init.oem.arch_setup = sdv_arch_setup; @@ -139,8 +212,25 @@ x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.pci.init = ce4100_pci_init; + reboot_type = BOOT_KBD; + +#ifdef CONFIG_FBX6HD + /* our crappy firmware does not pass a valid e820 map, so + * fixup manually */ + x86_init.resources.memory_setup = fbx6hd_memory_setup; + + /* early fixup of clock */ + x86_init.timers.tsc_pre_init = fbx6hd_fixup_ck505; +#endif + +#ifdef CONFIG_OF_EARLY_FLATTREE + initial_dtb = __pa(&__dtb_start); +#endif + #ifdef CONFIG_X86_IO_APIC x86_init.pci.init_irq = sdv_pci_init; x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck; #endif + + pm_power_off = ce4100_power_off; } diff -ruw linux-3.2.13/arch/x86/platform/ce4100/Makefile linux-3.2.13-fbx/arch/x86/platform/ce4100/Makefile --- linux-3.2.13/arch/x86/platform/ce4100/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/arch/x86/platform/ce4100/Makefile 2011-11-04 14:26:06.531888753 +0100 @@ -1 +1,8 @@ obj-$(CONFIG_X86_INTEL_CE) += ce4100.o + +obj-$(CONFIG_FBX6HD) += fbx6hd.dtb.o i2c-intelce.o + +clean-files := *dtb.S + +$(obj)/%.dtb: $(src)/%.dts + $(call cmd,dtc) diff -ruw linux-3.2.13/crypto/algboss.c linux-3.2.13-fbx/crypto/algboss.c --- linux-3.2.13/crypto/algboss.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/crypto/algboss.c 2013-06-13 15:06:39.150518864 +0200 @@ -219,7 +219,9 @@ if (type & CRYPTO_ALG_TESTED) goto skiptest; +#ifdef CONFIG_CRYPTO_BUILTIN_TEST err = alg_test(param->driver, param->alg, type, CRYPTO_ALG_TESTED); +#endif skiptest: crypto_alg_tested(param->driver, err); diff -ruw linux-3.2.13/crypto/Kconfig linux-3.2.13-fbx/crypto/Kconfig --- linux-3.2.13/crypto/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/crypto/Kconfig 2013-06-13 15:06:39.150518864 +0200 @@ -86,6 +86,10 @@ tristate select CRYPTO_ALGAPI2 +config CRYPTO_BUILTIN_TEST + bool "Include builtin tests" + default y + config CRYPTO_MANAGER tristate "Cryptographic algorithm manager" select CRYPTO_MANAGER2 diff -ruw linux-3.2.13/crypto/Makefile linux-3.2.13-fbx/crypto/Makefile --- linux-3.2.13/crypto/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/crypto/Makefile 2013-06-13 15:06:39.150518864 +0200 @@ -28,7 +28,10 @@ obj-$(CONFIG_CRYPTO_PCOMP2) += pcompress.o -cryptomgr-y := algboss.o testmgr.o +cryptomgr-y := algboss.o +ifeq ($(CONFIG_CRYPTO_BUILTIN_TEST),y) +cryptomgr-y += testmgr.o +endif obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o obj-$(CONFIG_CRYPTO_USER) += crypto_user.o diff -ruw linux-3.2.13/drivers/char/Kconfig linux-3.2.13-fbx/drivers/char/Kconfig --- linux-3.2.13/drivers/char/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/char/Kconfig 2013-06-13 15:06:39.290518798 +0200 @@ -15,6 +15,15 @@ kind of kernel debugging operations. When in doubt, say "N". +config DEVPHYSMEM + bool "/dev/physmem virtual device support" + default n + help + Say Y here if you want to support the /dev/physmem device. The + /dev/physmem device allows unprivileged access to physical memory + unused by the kernel. + When in doubt, say "N". + config STALDRV bool "Stallion multiport serial support" depends on SERIAL_NONSTANDARD diff -ruw linux-3.2.13/drivers/char/mem.c linux-3.2.13-fbx/drivers/char/mem.c --- linux-3.2.13/drivers/char/mem.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/char/mem.c 2013-06-13 15:06:39.302518792 +0200 @@ -354,6 +354,16 @@ } #endif +#ifdef CONFIG_DEVPHYSMEM +static int mmap_physmem(struct file * file, struct vm_area_struct * vma) +{ + if (vma->vm_pgoff < max_pfn && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + return mmap_mem(file, vma); +} +#endif + #ifdef CONFIG_CRASH_DUMP /* * Read memory corresponding to the old kernel. @@ -732,6 +742,13 @@ return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; } +#ifdef CONFIG_DEVPHYSMEM +static int open_physmem(struct inode * inode, struct file * filp) +{ + return 0; +} +#endif + #define zero_lseek null_lseek #define full_lseek null_lseek #define write_zero write_null @@ -807,6 +824,14 @@ }; #endif +#ifdef CONFIG_DEVPHYSMEM +static const struct file_operations physmem_fops = { + .mmap = mmap_physmem, + .open = open_physmem, + .get_unmapped_area = get_unmapped_area_mem, +}; +#endif + static ssize_t kmsg_writev(struct kiocb *iocb, const struct iovec *iv, unsigned long count, loff_t pos) { @@ -867,6 +892,9 @@ #ifdef CONFIG_CRASH_DUMP [12] = { "oldmem", 0, &oldmem_fops, NULL }, #endif +#ifdef CONFIG_DEVPHYSMEM + [16] = { "physmem", 0, &physmem_fops, &directly_mappable_cdev_bdi }, +#endif }; static int memory_open(struct inode *inode, struct file *filp) diff -ruw linux-3.2.13/drivers/hid/hid-dr.c linux-3.2.13-fbx/drivers/hid/hid-dr.c --- linux-3.2.13/drivers/hid/hid-dr.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/hid/hid-dr.c 2012-07-27 18:10:44.668135421 +0200 @@ -236,6 +236,75 @@ 0xC0 /* End Collection */ }; +/* Size of the original descriptor of the PID 0x0006 joystick */ +#define PID0006_RDESC_ORIG_SIZE 101 + +/* Fixed report descriptor for PID 0x006 joystick */ +static __u8 pid0006_rdesc_fixed[] = { + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x04, /* Usage (Joystik), */ + 0xA1, 0x01, /* Collection (Application), */ + 0xA1, 0x02, /* Collection (Logical), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x02, /* Report Count (2), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x35, 0x00, /* Physical Minimum (0), */ + 0x46, 0xFF, 0x00, /* Physical Maximum (255), */ + 0x09, 0x30, /* Usage (X), */ + 0x09, 0x31, /* Usage (Y), */ + 0x81, 0x02, /* Input (Variable), */ + + /* Ignore noisy input */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x01, /* Input (Constant), */ + + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x02, /* Report Count (2), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x35, 0x00, /* Physical Minimum (0), */ + 0x46, 0xFF, 0x00, /* Physical Maximum (255), */ + 0x09, 0x30, /* Usage (X), */ + 0x09, 0x31, /* Usage (Y), */ + 0x81, 0x02, /* Input (Variable), */ + + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x25, 0x07, /* Logical Maximum (7), */ + 0x46, 0x3B, 0x01, /* Physical Maximum (315), */ + 0x65, 0x14, /* Unit (Degrees), */ + 0x09, 0x39, /* Usage (Hat Switch), */ + 0x81, 0x42, /* Input (Variable, Null State), */ + 0x65, 0x00, /* Unit, */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x0C, /* Report Count (12), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x45, 0x01, /* Physical Maximum (1), */ + 0x05, 0x09, /* Usage Page (Button), */ + 0x19, 0x01, /* Usage Minimum (01h), */ + 0x29, 0x0C, /* Usage Maximum (0Ch), */ + 0x81, 0x02, /* Input (Variable), */ + 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x08, /* Report Count (8), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x45, 0x01, /* Physical Maximum (1), */ + 0x09, 0x01, /* Usage (01h), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xA1, 0x02, /* Collection (Logical), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x07, /* Report Count (7), */ + 0x46, 0xFF, 0x00, /* Physical Maximum (255), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x09, 0x02, /* Usage (02h), */ + 0x91, 0x02, /* Output (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { @@ -246,6 +315,12 @@ *rsize = sizeof(pid0011_rdesc_fixed); } break; + case 0x0006: + if (*rsize == PID0006_RDESC_ORIG_SIZE) { + rdesc = pid0006_rdesc_fixed; + *rsize = sizeof(pid0006_rdesc_fixed); + } + break; } return rdesc; } @@ -270,6 +345,7 @@ switch (hdev->product) { case 0x0006: + strcpy(hdev->name, "Freebox Gamepad"); ret = drff_init(hdev); if (ret) { dev_err(&hdev->dev, "force feedback init failed\n"); diff -ruw linux-3.2.13/drivers/hwmon/adt7475.c linux-3.2.13-fbx/drivers/hwmon/adt7475.c --- linux-3.2.13/drivers/hwmon/adt7475.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/hwmon/adt7475.c 2013-06-13 15:06:39.478518708 +0200 @@ -122,7 +122,19 @@ /* Macro to read the registers */ -#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg)) +static inline s32 __adt7475_read(const struct i2c_client *client, u8 cmd) +{ + s32 ret; + + ret = i2c_smbus_read_byte_data(client, cmd); + if (ret < 0) { + printk("__adt7475_read error: %d\n", ret); + return 0; + } + return ret; +} + +#define adt7475_read(reg) __adt7475_read(client, (reg)) /* Macros to easily index the registers */ @@ -276,6 +288,9 @@ { u16 val; + if (need_resched()) + yield(); + val = i2c_smbus_read_byte_data(client, reg); val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8); @@ -828,7 +843,7 @@ data->range[sattr->index] = adt7475_read(TEMP_TRANGE_REG(sattr->index)); - data->range[sattr->index] &= ~7; + data->range[sattr->index] &= ~0xf; data->range[sattr->index] |= out; i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index), diff -ruw linux-3.2.13/drivers/hwmon/coretemp.c linux-3.2.13-fbx/drivers/hwmon/coretemp.c --- linux-3.2.13/drivers/hwmon/coretemp.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/hwmon/coretemp.c 2013-06-13 15:06:39.478518708 +0200 @@ -213,14 +213,22 @@ usemsr_ee = 0; host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); - - if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL - && (host_bridge->device == 0xa000 /* NM10 based nettop */ - || host_bridge->device == 0xa010)) /* NM10 based netbook */ + if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL) { + switch (host_bridge->device) { + /* NM10 based nettop */ + case 0xa000: + case 0xa010: tjmax = 100000; - else + break; + /* CE3100 / CE4100 */ + case 0x0708: + tjmax = 110000; + break; + default: tjmax = 90000; - + break; + } + } pci_dev_put(host_bridge); } diff -ruw linux-3.2.13/drivers/hwmon/lm85.c linux-3.2.13-fbx/drivers/hwmon/lm85.c --- linux-3.2.13/drivers/hwmon/lm85.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/hwmon/lm85.c 2013-06-13 15:06:39.486518705 +0200 @@ -205,11 +205,11 @@ #define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] /* These are the PWM frequency encodings */ -static const int lm85_freq_map[8] = { /* 1 Hz */ - 10, 15, 23, 30, 38, 47, 61, 94 +static const int lm85_freq_map[11] = { /* 1 Hz */ + 10, 15, 23, 30, 38, 47, 61, 94, 94, 94, 94 }; -static const int adm1027_freq_map[8] = { /* 1 Hz */ - 11, 15, 22, 29, 35, 44, 59, 88 +static const int adm1027_freq_map[11] = { /* 1 Hz */ + 11, 15, 22, 29, 35, 44, 59, 88, 88, 88, 25000 }; static int FREQ_TO_REG(const int *map, int freq) @@ -217,7 +217,7 @@ int i; /* Find the closest match */ - for (i = 0; i < 7; ++i) + for (i = 0; i < 10; ++i) if (freq <= (map[i] + map[i + 1]) / 2) break; return i; @@ -225,7 +225,7 @@ static int FREQ_FROM_REG(const int *map, u8 reg) { - return map[reg & 0x07]; + return map[reg & 0x0f]; } /* Since we can't use strings, I'm abusing these numbers @@ -929,7 +929,7 @@ TEMP_FROM_REG(data->zone[nr].limit)); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), ((data->zone[nr].range & 0x0f) << 4) - | (data->pwm_freq[nr] & 0x07)); + | (data->pwm_freq[nr] & 0x0f)); mutex_unlock(&data->update_lock); return count; @@ -960,7 +960,7 @@ val - min); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), ((data->zone[nr].range & 0x0f) << 4) - | (data->pwm_freq[nr] & 0x07)); + | (data->pwm_freq[nr] & 0x0f)); mutex_unlock(&data->update_lock); return count; } @@ -1146,8 +1146,28 @@ static void lm85_init_client(struct i2c_client *client) { + struct lm85_data *data = i2c_get_clientdata(client); int value; + /* workaround for emc2300 (emc6d103s), when auto temp min is + * the default value, pwm can never be controlled manually, so + * change this */ + if (data->type == emc6d103s) { + int nr; + + for (nr = 0; nr < 3; nr++) { + data->zone[nr].limit = TEMP_TO_REG(-127000); + lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr), + data->zone[nr].limit); + + /* also force high frequency */ + data->pwm_freq[nr] = 0xa; + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + data->pwm_freq[nr]); + } + } + + /* Start monitoring if needed */ value = lm85_read_value(client, LM85_REG_CONFIG); if (!(value & 0x01)) { @@ -1570,7 +1590,7 @@ data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->pwm_freq[i] = val & 0x07; + data->pwm_freq[i] = val & 0x0f; data->zone[i].range = val >> 4; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); diff -ruw linux-3.2.13/drivers/i2c/busses/i2c-pxa.c linux-3.2.13-fbx/drivers/i2c/busses/i2c-pxa.c --- linux-3.2.13/drivers/i2c/busses/i2c-pxa.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/i2c/busses/i2c-pxa.c 2013-06-13 15:06:39.510518693 +0200 @@ -798,6 +798,16 @@ if (ret != I2C_RETRY) goto out; + if (i == 1 && + (readl(_ISR(i2c)) & ISR_UB) && + (readl(_IBMR(i2c)) != 3)) { + /* last try and bus is still busy, try + * reset */ + dev_err(&i2c->adap.dev, "%s: unit still busy after " + "hw reset\n", __func__); + i2c_pxa_reset(i2c); + } + if (i2c_debug) dev_dbg(&adap->dev, "Retrying transmission\n"); udelay(100); @@ -1054,6 +1064,11 @@ int ret; int irq; +#ifdef CONFIG_FBX6HD + if (dev->id != 2) + return -ENODEV; +#endif + res = platform_get_resource(dev, IORESOURCE_MEM, 0); irq = platform_get_irq(dev, 0); if (res == NULL || irq < 0) diff -ruw linux-3.2.13/drivers/i2c/busses/i2c-pxa-pci.c linux-3.2.13-fbx/drivers/i2c/busses/i2c-pxa-pci.c --- linux-3.2.13/drivers/i2c/busses/i2c-pxa-pci.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/i2c/busses/i2c-pxa-pci.c 2013-06-13 15:06:39.510518693 +0200 @@ -5,6 +5,7 @@ */ #include #include +#include #include #include #include @@ -37,6 +38,8 @@ res[1].start = dev->irq; res[1].end = dev->irq; + child = NULL; + if (dev->dev.of_node) { for_each_child_of_node(dev->dev.of_node, child) { const void *prop; struct resource r; @@ -65,6 +68,9 @@ ret = -EINVAL; goto out; } + } + + pdata.class = I2C_CLASS_HWMON; pdev = platform_device_alloc("ce4100-i2c", devnum); if (!pdev) { @@ -105,10 +111,6 @@ if (ret) return ret; - if (!dev->dev.of_node) { - dev_err(&dev->dev, "Missing device tree node.\n"); - return -EINVAL; - } sds = kzalloc(sizeof(*sds), GFP_KERNEL); if (!sds) { ret = -ENOMEM; diff -ruw linux-3.2.13/drivers/ide/Kconfig linux-3.2.13-fbx/drivers/ide/Kconfig --- linux-3.2.13/drivers/ide/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/ide/Kconfig 2012-11-30 16:07:16.658641554 +0100 @@ -692,6 +692,11 @@ depends on BLK_DEV_IDE_AU1XXX endchoice +config BLK_DEV_IDE_TANGO2 + tristate "IDE for Tango2" + depends on TANGO2 + select BLK_DEV_IDEDMA_SFF + config BLK_DEV_IDE_TX4938 tristate "TX4938 internal IDE support" depends on SOC_TX4938 diff -ruw linux-3.2.13/drivers/ide/Makefile linux-3.2.13-fbx/drivers/ide/Makefile --- linux-3.2.13/drivers/ide/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/ide/Makefile 2013-06-13 15:06:39.514518690 +0200 @@ -117,3 +117,4 @@ obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o +obj-$(CONFIG_BLK_DEV_IDE_TANGO2) += tango2ide.o diff -ruw linux-3.2.13/drivers/input/misc/Kconfig linux-3.2.13-fbx/drivers/input/misc/Kconfig --- linux-3.2.13/drivers/input/misc/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/input/misc/Kconfig 2013-06-13 15:06:39.722518589 +0200 @@ -544,4 +544,9 @@ To compile this driver as a module, choose M here: the module will be called xen-kbdfront. +config INPUT_SMSC_CAP1066 + tristate "SMSC CAP1066 capacitive sensor driver" + select I2C + select INPUT_POLLDEV + endif diff -ruw linux-3.2.13/drivers/input/misc/Makefile linux-3.2.13-fbx/drivers/input/misc/Makefile --- linux-3.2.13/drivers/input/misc/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/input/misc/Makefile 2013-06-13 15:06:39.722518589 +0200 @@ -51,3 +51,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o +obj-$(CONFIG_INPUT_SMSC_CAP1066) += smsc_cap1066.o diff -ruw linux-3.2.13/drivers/Kconfig linux-3.2.13-fbx/drivers/Kconfig --- linux-3.2.13/drivers/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/Kconfig 2013-06-13 15:06:39.162518860 +0200 @@ -4,8 +4,12 @@ source "drivers/connector/Kconfig" +source "drivers/fbxprocfs/Kconfig" + source "drivers/mtd/Kconfig" +source "drivers/fbxmtd/Kconfig" + source "drivers/of/Kconfig" source "drivers/parport/Kconfig" @@ -60,6 +64,10 @@ source "drivers/gpio/Kconfig" +source "drivers/fbxgpio/Kconfig" + +source "drivers/fbxjtag/Kconfig" + source "drivers/w1/Kconfig" source "drivers/power/Kconfig" @@ -68,6 +76,8 @@ source "drivers/thermal/Kconfig" +source "drivers/fbxwatchdog/Kconfig" + source "drivers/watchdog/Kconfig" source "drivers/ssb/Kconfig" @@ -96,6 +106,8 @@ source "drivers/leds/Kconfig" +source "drivers/fbxpanel/Kconfig" + source "drivers/accessibility/Kconfig" source "drivers/infiniband/Kconfig" diff -ruw linux-3.2.13/drivers/Makefile linux-3.2.13-fbx/drivers/Makefile --- linux-3.2.13/drivers/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/Makefile 2013-06-13 15:06:39.162518860 +0200 @@ -8,6 +8,8 @@ # GPIO must come after pinctrl as gpios may need to mux pins etc obj-y += pinctrl/ obj-y += gpio/ +obj-$(CONFIG_FREEBOX_GPIO) += fbxgpio/ +obj-$(CONFIG_FREEBOX_JTAG) += fbxjtag/ obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_PARISC) += parisc/ obj-$(CONFIG_RAPIDIO) += rapidio/ @@ -60,6 +62,9 @@ obj-$(CONFIG_UIO) += uio/ obj-y += cdrom/ obj-y += auxdisplay/ + +obj-$(CONFIG_FREEBOX_PROCFS) += fbxprocfs/ +obj-$(CONFIG_FREEBOX_MTD) += fbxmtd/ obj-$(CONFIG_PCCARD) += pcmcia/ obj-$(CONFIG_DIO) += dio/ obj-$(CONFIG_SBUS) += sbus/ @@ -85,6 +90,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power/ obj-$(CONFIG_HWMON) += hwmon/ obj-$(CONFIG_THERMAL) += thermal/ +obj-$(CONFIG_FREEBOX_WATCHDOG) += fbxwatchdog/ obj-$(CONFIG_WATCHDOG) += watchdog/ obj-$(CONFIG_PHONE) += telephony/ obj-$(CONFIG_MD) += md/ @@ -100,6 +106,7 @@ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_MEMSTICK) += memstick/ obj-y += leds/ +obj-$(CONFIG_FREEBOX_PANEL) += fbxpanel/ obj-$(CONFIG_INFINIBAND) += infiniband/ obj-$(CONFIG_SGI_SN) += sn/ obj-y += firmware/ diff -ruw linux-3.2.13/drivers/media/dvb/dvb-core/dvb_frontend.c linux-3.2.13-fbx/drivers/media/dvb/dvb-core/dvb_frontend.c --- linux-3.2.13/drivers/media/dvb/dvb-core/dvb_frontend.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/dvb-core/dvb_frontend.c 2013-06-13 15:06:39.882518515 +0200 @@ -695,6 +695,7 @@ fepriv->exit = DVB_FE_NORMAL_EXIT; mb(); + wake_up_all(&fepriv->events.wait_queue); if (!fepriv->thread) return; @@ -1950,6 +1951,9 @@ poll_wait (file, &fepriv->events.wait_queue, wait); + if (fepriv->exit) + return POLLERR | POLLHUP; + if (fepriv->events.eventw != fepriv->events.eventr) return (POLLIN | POLLRDNORM | POLLPRI); diff -ruw linux-3.2.13/drivers/media/dvb/dvb-usb/dib0700_devices.c linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dib0700_devices.c --- linux-3.2.13/drivers/media/dvb/dvb-usb/dib0700_devices.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dib0700_devices.c 2013-06-13 15:06:39.886518513 +0200 @@ -2960,6 +2960,7 @@ /* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_HOOK_DEFAULT_STK7770P) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -3640,6 +3641,35 @@ .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7770p_frontend_attach, + .tuner_attach = dib7770p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK7770P reference design no IR", + { &dib0700_usb_id_table[78], NULL }, + { NULL }, + }, + }, + + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { diff -ruw linux-3.2.13/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c --- linux-3.2.13/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c 2013-06-13 15:06:39.890518510 +0200 @@ -244,6 +244,10 @@ adap->fe_adap[i].fe_sleep = adap->fe_adap[i].fe->ops.sleep; adap->fe_adap[i].fe->ops.sleep = dvb_usb_fe_sleep; + /* only attach the tuner if the demod is there */ + if (adap->props.fe[i].tuner_attach != NULL) + adap->props.fe[i].tuner_attach(adap); + if (dvb_register_frontend(&adap->dvb_adap, adap->fe_adap[i].fe)) { err("Frontend %d registration failed.", i); dvb_frontend_detach(adap->fe_adap[i].fe); @@ -256,10 +260,6 @@ return 0; } - /* only attach the tuner if the demod is there */ - if (adap->props.fe[i].tuner_attach != NULL) - adap->props.fe[i].tuner_attach(adap); - adap->num_frontends_initialized++; } diff -ruw linux-3.2.13/drivers/media/dvb/dvb-usb/dvb-usb.h linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dvb-usb.h --- linux-3.2.13/drivers/media/dvb/dvb-usb/dvb-usb.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dvb-usb.h 2013-06-13 15:06:39.890518510 +0200 @@ -295,7 +295,7 @@ int generic_bulk_ctrl_endpoint_response; int num_device_descs; - struct dvb_usb_device_description devices[12]; + struct dvb_usb_device_description devices[32]; }; /** diff -ruw linux-3.2.13/drivers/media/dvb/dvb-usb/dvb-usb-ids.h linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dvb-usb-ids.h --- linux-3.2.13/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2013-06-13 15:06:39.890518510 +0200 @@ -95,6 +95,7 @@ #define USB_PID_CREATIX_CTX1921 0x1921 #define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 #define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 +#define USB_PID_DIBCOM_HOOK_DEFAULT_STK7770P 0x0066 #define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 #define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 #define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 diff -ruw linux-3.2.13/drivers/media/dvb/Kconfig linux-3.2.13-fbx/drivers/media/dvb/Kconfig --- linux-3.2.13/drivers/media/dvb/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/Kconfig 2012-11-30 16:07:17.138641576 +0100 @@ -64,6 +64,10 @@ depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/dm1105/Kconfig" +comment "Supported Tango2 Adapters" + depends on DVB_CORE && ARCH_FBX5_B +source "drivers/media/dvb/tango2/Kconfig" + comment "Supported FireWire (IEEE 1394) Adapters" depends on DVB_CORE && FIREWIRE source "drivers/media/dvb/firewire/Kconfig" diff -ruw linux-3.2.13/drivers/media/dvb/Makefile linux-3.2.13-fbx/drivers/media/dvb/Makefile --- linux-3.2.13/drivers/media/dvb/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/Makefile 2012-11-30 16:07:17.138641576 +0100 @@ -16,6 +16,7 @@ pt1/ \ mantis/ \ ngene/ \ - ddbridge/ + ddbridge/ \ + tango2/ obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff -ruw linux-3.2.13/drivers/misc/Kconfig linux-3.2.13-fbx/drivers/misc/Kconfig --- linux-3.2.13/drivers/misc/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/Kconfig 2013-06-13 15:06:40.162518380 +0200 @@ -451,6 +451,18 @@ To compile this driver as a module, choose M here: the module will be called vmw_balloon. +config INTELCE_PIC16PMU + tristate "PIC16 PMU, LED, hwmon support" + select INPUT_POLLDEV + select NEW_LEDS + select I2C + select HWMON + select ARCH_REQUIRE_GPIOLIB + ---help--- + Freebox v6 HD PIC16 PMU interface support, enables + control of the on-board LEDs and reports the power status, + reset status and button status. + config ARM_CHARLCD bool "ARM Ltd. Character LCD Driver" depends on PLAT_VERSATILE @@ -500,6 +512,9 @@ stereo and mono audio, video, microphone and UART data to use a common connector port. +config CRASHZONE + bool "crashzone support" + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" @@ -508,5 +523,7 @@ source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" +source "drivers/misc/remoti/Kconfig" +source "drivers/misc/hdmi-cec/Kconfig" endif # MISC_DEVICES diff -ruw linux-3.2.13/drivers/misc/Makefile linux-3.2.13-fbx/drivers/misc/Makefile --- linux-3.2.13/drivers/misc/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/Makefile 2013-06-13 15:06:40.162518380 +0200 @@ -23,6 +23,7 @@ obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ +obj-$(CONFIG_INTELCE_PIC16PMU) += pic16-pmu.o obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o obj-$(CONFIG_HP_ILO) += hpilo.o @@ -36,6 +37,7 @@ obj-$(CONFIG_C2PORT) += c2port/ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ obj-$(CONFIG_HMC6352) += hmc6352.o +obj-$(CONFIG_CRASHZONE) += crash_zone.o obj-y += eeprom/ obj-y += cb710/ obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o @@ -48,3 +50,5 @@ obj-y += carma/ obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ +obj-y += remoti/ +obj-y += hdmi-cec/ diff -ruw linux-3.2.13/drivers/mtd/Kconfig linux-3.2.13-fbx/drivers/mtd/Kconfig --- linux-3.2.13/drivers/mtd/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/Kconfig 2013-06-13 15:06:40.198518362 +0200 @@ -23,6 +23,9 @@ WARNING: some of the tests will ERASE entire MTD device which they test. Do not use these tests unless you really know what you do. +config MTD_ERASE_PRINTK + bool "write to kernel log when a block is erased" + config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" ---help--- @@ -140,6 +143,17 @@ ---help--- TI AR7 partitioning support +config MTD_FBX6HD_PARTS + tristate "Freebox V6 HD partitioning support" + help + Freebox V6 HD partitioning support + +config MTD_FBX6HD_PARTS_WRITE_ALL + bool "make all partitions writeable" + depends on MTD_FBX6HD_PARTS + help + Freebox V6 HD partitions support + comment "User Modules And Translation Layers" config MTD_CHAR diff -ruw linux-3.2.13/drivers/mtd/Makefile linux-3.2.13-fbx/drivers/mtd/Makefile --- linux-3.2.13/drivers/mtd/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/Makefile 2013-06-13 15:06:40.198518362 +0200 @@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o +obj-$(CONFIG_MTD_FBX6HD_PARTS) += fbx6hd-mtdparts.o # 'Users' - code which presents functionality to userspace. obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff -ruw linux-3.2.13/drivers/mtd/mtdchar.c linux-3.2.13-fbx/drivers/mtd/mtdchar.c --- linux-3.2.13/drivers/mtd/mtdchar.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/mtdchar.c 2013-06-13 15:06:40.210518356 +0200 @@ -221,6 +221,7 @@ { struct mtd_oob_ops ops; + memset(&ops, 0, sizeof (ops)); ops.mode = MTD_OPS_RAW; ops.datbuf = kbuf; ops.oobbuf = NULL; @@ -317,6 +318,7 @@ { struct mtd_oob_ops ops; + memset(&ops, 0, sizeof (ops)); ops.mode = MTD_OPS_RAW; ops.datbuf = kbuf; ops.oobbuf = NULL; @@ -720,6 +722,10 @@ erase->callback = mtdchar_erase_callback; erase->priv = (unsigned long)&waitq; +#ifdef CONFIG_MTD_ERASE_PRINTK + printk(KERN_DEBUG "mtd: %s: ERASE offset=@%08llx\n", + mtd->name, erase->addr); +#endif /* FIXME: Allow INTERRUPTIBLE. Which means not having the wait_queue head on the stack. diff -ruw linux-3.2.13/drivers/mtd/mtdcore.c linux-3.2.13-fbx/drivers/mtd/mtdcore.c --- linux-3.2.13/drivers/mtd/mtdcore.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/mtdcore.c 2013-06-13 15:06:40.210518356 +0200 @@ -252,6 +252,33 @@ } static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL); +static ssize_t mtd_nand_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mtd_info *mtd = dev_to_mtd(dev); + + return snprintf(buf, PAGE_SIZE, "%s\n", mtd->nand_type); +} +static DEVICE_ATTR(nand_type, S_IRUGO, mtd_nand_type_show, NULL); + +static ssize_t mtd_nand_manufacturer_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mtd_info *mtd = dev_to_mtd(dev); + + return snprintf(buf, PAGE_SIZE, "%s\n", mtd->nand_manufacturer); +} +static DEVICE_ATTR(nand_manufacturer, S_IRUGO, mtd_nand_manufacturer_show, NULL); + +static ssize_t mtd_nand_onfi_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mtd_info *mtd = dev_to_mtd(dev); + + return snprintf(buf, PAGE_SIZE, "%s\n", mtd->onfi_version); +} +static DEVICE_ATTR(onfi_version, S_IRUGO, mtd_nand_onfi_version_show, NULL); + static struct attribute *mtd_attrs[] = { &dev_attr_type.attr, &dev_attr_flags.attr, @@ -262,6 +289,9 @@ &dev_attr_oobsize.attr, &dev_attr_numeraseregions.attr, &dev_attr_name.attr, + &dev_attr_nand_type.attr, + &dev_attr_nand_manufacturer.attr, + &dev_attr_onfi_version.attr, NULL, }; diff -ruw linux-3.2.13/drivers/mtd/mtdpart.c linux-3.2.13-fbx/drivers/mtd/mtdpart.c --- linux-3.2.13/drivers/mtd/mtdpart.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/mtdpart.c 2013-06-13 15:06:40.210518356 +0200 @@ -406,6 +406,9 @@ slave->mtd.oobsize = master->oobsize; slave->mtd.oobavail = master->oobavail; slave->mtd.subpage_sft = master->subpage_sft; + slave->mtd.nand_type = master->nand_type; + slave->mtd.nand_manufacturer = master->nand_manufacturer; + slave->mtd.onfi_version = master->onfi_version; slave->mtd.name = name; slave->mtd.owner = master->owner; diff -ruw linux-3.2.13/drivers/mtd/nand/Kconfig linux-3.2.13-fbx/drivers/mtd/nand/Kconfig --- linux-3.2.13/drivers/mtd/nand/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/nand/Kconfig 2013-06-13 15:06:40.214518353 +0200 @@ -58,6 +58,15 @@ NAND chips (page size 256 byte, erase size 4-8KiB). The IDs of these chips were reused by later, larger chips. +config MTD_FORCE_BAD_BLOCK_ERASE + bool "Force erase on bad blocks (useful for bootloader parts)" + depends on MTD_NAND + default n + help + Enable this option only when you need to force an erase on + blocks being marked as "bad" by Linux (i.e: other ECC/bad block + marker layout). + config MTD_NAND_AUTCPU12 tristate "SmartMediaCard on autronix autcpu12 board" depends on ARCH_AUTCPU12 @@ -537,4 +546,9 @@ Enables support for NAND Flash chips on the ST Microelectronics Flexible Static Memory Controller (FSMC) +config MTD_NAND_DENALI_FBX + tristate "NAND Denali controller support" + depends on MTD_NAND && PCI + default n + endif # MTD_NAND diff -ruw linux-3.2.13/drivers/mtd/nand/Makefile linux-3.2.13-fbx/drivers/mtd/nand/Makefile --- linux-3.2.13/drivers/mtd/nand/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/nand/Makefile 2013-06-13 15:06:40.214518353 +0200 @@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_RICOH) += r852.o obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ +obj-$(CONFIG_MTD_NAND_DENALI_FBX) += denali_nand.o nand-objs := nand_base.o nand_bbt.o diff -ruw linux-3.2.13/drivers/mtd/nand/nand_base.c linux-3.2.13-fbx/drivers/mtd/nand/nand_base.c --- linux-3.2.13/drivers/mtd/nand/nand_base.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/mtd/nand/nand_base.c 2013-06-13 15:06:40.218518351 +0200 @@ -2589,6 +2589,7 @@ while (len) { /* Heck if we have a bad block, we do not erase bad blocks! */ +#ifndef CONFIG_MTD_FORCE_BAD_BLOCK_ERASE if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", @@ -2596,6 +2597,7 @@ instr->state = MTD_ERASE_FAILED; goto erase_exit; } +#endif /* * Invalidate the page cache, if we erase the block which @@ -2922,6 +2924,7 @@ int i, maf_idx; u8 id_data[8]; int ret; + char onfi_version[5]; /* Select the device */ chip->select_chip(mtd, 0); @@ -3163,7 +3166,38 @@ nand_manuf_ids[maf_idx].name, chip->onfi_version ? chip->onfi_params.model : type->name); + mtd->nand_type = kstrdup(type->name, GFP_KERNEL); + if (!mtd->nand_type) + return ERR_PTR(-ENOMEM); + + mtd->nand_manufacturer = kstrdup(nand_manuf_ids[maf_idx].name, + GFP_KERNEL); + if (!mtd->nand_manufacturer) { + ret = -ENOMEM; + goto out_nand_type; + } + + snprintf(onfi_version, sizeof(onfi_version), "0"); + + if (chip->onfi_version) + snprintf(onfi_version, sizeof(onfi_version), "%d.%d", + chip->onfi_version / 10, + chip->onfi_version % 10); + + mtd->onfi_version = kstrdup(onfi_version, GFP_KERNEL); + if (!mtd->onfi_version) { + ret = -ENOMEM; + goto out_nand_manufacturer; + } + return type; + +out_nand_manufacturer: + kfree(mtd->nand_manufacturer); +out_nand_type: + kfree(mtd->nand_type); + + return ERR_PTR(ret); } /** @@ -3183,6 +3217,7 @@ int i, busw, nand_maf_id, nand_dev_id; struct nand_chip *chip = mtd->priv; struct nand_flash_dev *type; + int err; /* Get buswidth to select the correct functions */ busw = chip->options & NAND_BUSWIDTH_16; @@ -3197,7 +3232,8 @@ if (!(chip->options & NAND_SCAN_SILENT_NODEV)) pr_warn("No NAND device found\n"); chip->select_chip(mtd, -1); - return PTR_ERR(type); + err = PTR_ERR(type); + goto out_error; } /* Check for a chip array */ @@ -3220,6 +3256,16 @@ mtd->size = i * chip->chipsize; return 0; + +out_error: + if (mtd->nand_type) + kfree(mtd->nand_type); + if (mtd->nand_manufacturer) + kfree(mtd->nand_manufacturer); + if (mtd->onfi_version) + kfree(mtd->onfi_version); + + return err; } EXPORT_SYMBOL(nand_scan_ident); @@ -3342,9 +3388,13 @@ chip->ecc.read_page = nand_read_page_swecc; chip->ecc.read_subpage = nand_read_subpage; chip->ecc.write_page = nand_write_page_swecc; + if (!chip->ecc.read_page_raw) chip->ecc.read_page_raw = nand_read_page_raw; + if (!chip->ecc.write_page_raw) chip->ecc.write_page_raw = nand_write_page_raw; + if (!chip->ecc.read_oob) chip->ecc.read_oob = nand_read_oob_std; + if (!chip->ecc.write_oob) chip->ecc.write_oob = nand_write_oob_std; if (!chip->ecc.size) chip->ecc.size = 256; diff -ruw linux-3.2.13/drivers/net/ethernet/intel/e1000/e1000.h linux-3.2.13-fbx/drivers/net/ethernet/intel/e1000/e1000.h --- linux-3.2.13/drivers/net/ethernet/intel/e1000/e1000.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/net/ethernet/intel/e1000/e1000.h 2013-06-13 15:06:40.362518284 +0200 @@ -224,6 +224,7 @@ u16 link_speed; u16 link_duplex; spinlock_t stats_lock; + spinlock_t phy_lock; unsigned int total_tx_bytes; unsigned int total_tx_packets; unsigned int total_rx_bytes; @@ -311,6 +312,11 @@ struct delayed_work fifo_stall_task; struct delayed_work phy_info_task; +#ifdef CONFIG_FBX6HD + int last_phy_gpio; + bool last_link_active; +#endif + struct mutex mutex; }; diff -ruw linux-3.2.13/drivers/net/ethernet/intel/e1000/e1000_hw.c linux-3.2.13-fbx/drivers/net/ethernet/intel/e1000/e1000_hw.c --- linux-3.2.13/drivers/net/ethernet/intel/e1000/e1000_hw.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/net/ethernet/intel/e1000/e1000_hw.c 2013-06-13 15:06:40.362518284 +0200 @@ -107,6 +107,7 @@ }; static DEFINE_SPINLOCK(e1000_eeprom_lock); +static DEFINE_SPINLOCK(e1000_phy_lock); /** * e1000_set_phy_type - Set the phy type member in the hw struct. @@ -2830,19 +2831,25 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) { u32 ret_val; + unsigned long flags; e_dbg("e1000_read_phy_reg"); + spin_lock_irqsave(&e1000_phy_lock, flags); + if ((hw->phy_type == e1000_phy_igp) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (u16) reg_addr); - if (ret_val) + if (ret_val) { + spin_unlock_irqrestore(&e1000_phy_lock, flags); return ret_val; } + } ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, phy_data); + spin_unlock_irqrestore(&e1000_phy_lock, flags); return ret_val; } @@ -2965,19 +2972,25 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) { u32 ret_val; + unsigned long flags; e_dbg("e1000_write_phy_reg"); + spin_lock_irqsave(&e1000_phy_lock, flags); + if ((hw->phy_type == e1000_phy_igp) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (u16) reg_addr); - if (ret_val) + if (ret_val) { + spin_unlock_irqrestore(&e1000_phy_lock, flags); return ret_val; } + } ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr, phy_data); + spin_unlock_irqrestore(&e1000_phy_lock, flags); return ret_val; } diff -ruw linux-3.2.13/drivers/net/ethernet/intel/e1000/e1000_main.c linux-3.2.13-fbx/drivers/net/ethernet/intel/e1000/e1000_main.c --- linux-3.2.13/drivers/net/ethernet/intel/e1000/e1000_main.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/net/ethernet/intel/e1000/e1000_main.c 2013-06-13 15:06:40.366518282 +0200 @@ -32,6 +32,12 @@ #include #include #include +#include + +#ifdef CONFIG_FBX6HD +#include +#define GPIO_PHY_LED2 20 +#endif /* Intel Media SOC GbE MDIO physical base address */ static unsigned long ce4100_gbe_mdio_base_phy; @@ -1098,6 +1104,14 @@ e1000_reset_hw(hw); +#ifdef CONFIG_FBX6HD + fbxserialinfo_get_mac_addr(hw->mac_addr); + printk("e1000: using mac address %02x:%02x:%02x:%02x:%02x:%02x " + "(fbxserial)\n", + hw->mac_addr[0], hw->mac_addr[1], hw->mac_addr[2], + hw->mac_addr[3], hw->mac_addr[4], hw->mac_addr[5]); + (void)e1000_validate_eeprom_checksum; +#else /* make sure the EEPROM is good */ if (e1000_validate_eeprom_checksum(hw) < 0) { e_err(probe, "The EEPROM Checksum Is Not Valid\n"); @@ -1116,6 +1130,9 @@ if (e1000_read_mac_addr(hw)) e_err(probe, "EEPROM Read Error\n"); } +#endif + + /* don't block initalization here due to bad MAC address */ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len); memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len); @@ -1205,6 +1222,13 @@ } else break; } + +#ifdef CONFIG_FBX6HD + /* request gpio use to read link change from PHY */ + gpio_request(GPIO_PHY_LED2, "phy_leds2"); + gpio_direction_input(GPIO_PHY_LED2); + adapter->last_phy_gpio = -1; +#endif } /* reset the hardware with the new settings */ @@ -2391,6 +2415,26 @@ */ switch (hw->media_type) { case e1000_media_type_copper: +#ifdef CONFIG_FBX6HD + { + int val; + + val = gpio_get_value(GPIO_PHY_LED2); + if (val != adapter->last_phy_gpio) + hw->get_link_status = 1; + adapter->last_phy_gpio = val; + + if (hw->get_link_status) { + e1000_check_for_link(hw); + link_active = !hw->get_link_status; + hw->get_link_status = 0; + } else { + link_active = adapter->last_link_active; + } + adapter->last_link_active = link_active; + break; + } +#else if (hw->mac_type == e1000_ce4100) hw->get_link_status = 1; if (hw->get_link_status) { @@ -2400,6 +2444,7 @@ link_active = true; } break; +#endif case e1000_media_type_fiber: e1000_check_for_link(hw); link_active = !!(er32(STATUS) & E1000_STATUS_LU); @@ -3488,11 +3533,13 @@ /* Phy Stats */ if (hw->media_type == e1000_media_type_copper) { +#ifndef CONFIG_FBX6HD if ((adapter->link_speed == SPEED_1000) && (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; adapter->phy_stats.idle_errors += phy_tmp; } +#endif if ((hw->mac_type <= e1000_82546) && (hw->phy_type == e1000_phy_m88) && diff -ruw linux-3.2.13/drivers/net/ethernet/marvell/Kconfig linux-3.2.13-fbx/drivers/net/ethernet/marvell/Kconfig --- linux-3.2.13/drivers/net/ethernet/marvell/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/net/ethernet/marvell/Kconfig 2012-07-27 18:10:45.636136344 +0200 @@ -23,6 +23,7 @@ depends on (MV64X60 || PPC32 || PLAT_ORION) && INET select INET_LRO select PHYLIB + select MII ---help--- This driver supports the gigabit ethernet MACs in the Marvell Discovery PPC/MIPS chipset family (MV643XX) and diff -ruw linux-3.2.13/drivers/net/Kconfig linux-3.2.13-fbx/drivers/net/Kconfig --- linux-3.2.13/drivers/net/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/net/Kconfig 2013-06-13 15:06:40.230518348 +0200 @@ -338,4 +338,18 @@ To compile this driver as a module, choose M here: the module will be called vmxnet3. +config TANGO2_ENET + tristate "SMP863x Builtin Ethernet support" + depends on NET_ETHERNET && TANGO2 + select MII + select CRC32 + help + This option adds support for the SMP863x integrated Ethernet + controller. This driver uses NAPI and generic Linux MII + support. + +config TANGO2_PCINET_H + tristate "SMP863x network over PCI support (smp863x side)" + depends on NET_ETHERNET && TANGO2 + endif # NETDEVICES diff -ruw linux-3.2.13/drivers/net/Makefile linux-3.2.13-fbx/drivers/net/Makefile --- linux-3.2.13/drivers/net/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/net/Makefile 2013-06-13 15:06:40.230518348 +0200 @@ -66,3 +66,5 @@ obj-$(CONFIG_USB_ZD1201) += usb/ obj-$(CONFIG_USB_IPHETH) += usb/ obj-$(CONFIG_USB_CDC_PHONET) += usb/ +obj-$(CONFIG_TANGO2_ENET) += tango2_enet.o +obj-$(CONFIG_TANGO2_PCINET_H) += tango2_pcinet_h.o diff -ruw linux-3.2.13/drivers/net/wireless/Kconfig linux-3.2.13-fbx/drivers/net/wireless/Kconfig --- linux-3.2.13/drivers/net/wireless/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/net/wireless/Kconfig 2013-06-13 15:06:40.566518186 +0200 @@ -268,6 +268,10 @@ To compile this driver as a module, choose M here: the module will be called mwl8k. If unsure, say N. +config MWL8K_MFG + bool "Marvell 8W8xxx manufacturing mode" + depends on MWL8K + source "drivers/net/wireless/ath/Kconfig" source "drivers/net/wireless/b43/Kconfig" source "drivers/net/wireless/b43legacy/Kconfig" diff -ruw linux-3.2.13/drivers/platform/Kconfig linux-3.2.13-fbx/drivers/platform/Kconfig --- linux-3.2.13/drivers/platform/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/Kconfig 2011-11-04 14:26:08.939891247 +0100 @@ -1,3 +1,11 @@ if X86 source "drivers/platform/x86/Kconfig" endif + +if TANGO2 +source "drivers/platform/tango2/Kconfig" +endif + +if X86_INTEL_CE +source "drivers/platform/intelce/Kconfig" +endif diff -ruw linux-3.2.13/drivers/platform/Makefile linux-3.2.13-fbx/drivers/platform/Makefile --- linux-3.2.13/drivers/platform/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/Makefile 2013-06-13 15:06:40.834518058 +0200 @@ -3,3 +3,5 @@ # obj-$(CONFIG_X86) += x86/ +obj-$(CONFIG_TANGO2) += tango2/ +obj-$(CONFIG_X86_INTEL_CE) += intelce/ diff -ruw linux-3.2.13/drivers/spi/Kconfig linux-3.2.13-fbx/drivers/spi/Kconfig --- linux-3.2.13/drivers/spi/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/spi/Kconfig 2013-06-13 15:06:41.082517939 +0200 @@ -268,6 +268,12 @@ help This selects a driver for the PPC4xx SPI Controller. +config SPI_TDM_ORION + tristate "Orion TDM SPI master" + depends on PLAT_ORION + help + This enables using the TDM SPI master controller on the Orion chips. + config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL diff -ruw linux-3.2.13/drivers/spi/Makefile linux-3.2.13-fbx/drivers/spi/Makefile --- linux-3.2.13/drivers/spi/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/spi/Makefile 2013-06-13 15:06:41.082517939 +0200 @@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o obj-$(CONFIG_SPI_ORION) += spi-orion.o +obj-$(CONFIG_SPI_TDM_ORION) += orion_tdm_spi.o obj-$(CONFIG_SPI_PL022) += spi-pl022.o obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o @@ -58,4 +59,3 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o obj-$(CONFIG_SPI_TXX9) += spi-txx9.o obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o - diff -ruw linux-3.2.13/drivers/tty/serial/8250.c linux-3.2.13-fbx/drivers/tty/serial/8250.c --- linux-3.2.13/drivers/tty/serial/8250.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/tty/serial/8250.c 2013-06-13 15:06:41.394517787 +0200 @@ -44,6 +44,12 @@ #include "8250.h" +#ifdef CONFIG_TANGO2 +#include + +extern unsigned long em8xxx_sys_frequency; +#endif + #ifdef CONFIG_SPARC #include "suncore.h" #endif @@ -416,14 +422,45 @@ static unsigned int mem_serial_in(struct uart_port *p, int offset) { + +#ifdef CONFIG_TANGO2 + unsigned long v; + + /* no EFR on tango2 */ + if (offset == UART_EFR) + v = 0; + else + v = gbus_readl((unsigned long)p->membase + + (offset << p->regshift)); + return v; +#else offset = map_8250_in_reg(p, offset) << p->regshift; return readb(p->membase + offset); +#endif } static void mem_serial_out(struct uart_port *p, int offset, int value) { +#ifdef CONFIG_TANGO2 + /* + * we add a special case for UART_DL register, since + * register content has a different meaning for us. + */ + if (offset == UART_DL) { + /* select right clock source */ + value = (em8xxx_sys_frequency / p->uartclk); + } + + /* no EFR on tango2 */ + if (offset != UART_EFR) { + offset = offset << p->regshift; + gbus_writel((unsigned long)p->membase + offset, + value); + } +#else offset = map_8250_out_reg(p, offset) << p->regshift; writeb(value, p->membase + offset); +#endif } static void mem32_serial_out(struct uart_port *p, int offset, int value) @@ -529,6 +566,7 @@ #define serial_inp(up, offset) serial_in(up, offset) #define serial_outp(up, offset, value) serial_out(up, offset, value) +#ifndef CONFIG_TANGO2 /* Uart divisor latch read */ static inline int _serial_dl_read(struct uart_8250_port *up) { @@ -581,6 +619,7 @@ #define serial_dl_read(up) _serial_dl_read(up) #define serial_dl_write(up, value) _serial_dl_write(up, value) #endif +#endif /* * For the 16C950 @@ -714,7 +753,11 @@ static int size_fifo(struct uart_8250_port *up) { unsigned char old_fcr, old_mcr, old_lcr; +#ifdef CONFIG_TANGO2 + unsigned short old_dll, old_dlm; +#else unsigned short old_dl; +#endif int count; old_lcr = serial_inp(up, UART_LCR); @@ -725,8 +768,14 @@ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_outp(up, UART_MCR, UART_MCR_LOOP); serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); +#ifdef CONFIG_TANGO2 + old_dll = serial_inp(up, UART_DL) & 0xff; + old_dlm = serial_inp(up, UART_DL) >> 8; + serial_outp(up, UART_DL, 0x01); +#else old_dl = serial_dl_read(up); serial_dl_write(up, 0x0001); +#endif serial_outp(up, UART_LCR, 0x03); for (count = 0; count < 256; count++) serial_outp(up, UART_TX, count); @@ -737,7 +786,11 @@ serial_outp(up, UART_FCR, old_fcr); serial_outp(up, UART_MCR, old_mcr); serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); +#ifdef CONFIG_TANGO2 + serial_outp(up, UART_DL, (old_dlm << 8) | old_dll); +#else serial_dl_write(up, old_dl); +#endif serial_outp(up, UART_LCR, old_lcr); return count; @@ -756,6 +809,16 @@ old_lcr = serial_inp(p, UART_LCR); serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); +#ifdef CONFIG_TANGO2 + old_dll = serial_inp(p, UART_DL) & 0xff; + old_dlm = serial_inp(p, UART_DL) >> 8; + + serial_outp(p, UART_DL, 0); + + id = serial_inp(p, UART_DL); + + serial_outp(p, UART_DL, (old_dlm << 8) | old_dll); +#else old_dll = serial_inp(p, UART_DLL); old_dlm = serial_inp(p, UART_DLM); @@ -766,6 +829,7 @@ serial_outp(p, UART_DLL, old_dll); serial_outp(p, UART_DLM, old_dlm); +#endif serial_outp(p, UART_LCR, old_lcr); return id; @@ -984,11 +1048,20 @@ serial_outp(up, UART_LCR, 0xE0); +#ifdef CONFIG_TANGO2 + quot = serial_inp(up, UART_DL); +#else quot = serial_dl_read(up); +#endif quot <<= 3; - if (ns16550a_goto_highspeed(up)) + if (ns16550a_goto_highspeed(up)) { +#ifdef CONFIG_TANGO2 + serial_outp(up, UART_DL, quot); +#else serial_dl_write(up, quot); +#endif + } serial_outp(up, UART_LCR, 0); @@ -2435,7 +2508,11 @@ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ } +#ifdef CONFIG_TANGO2 + serial_outp(up, UART_DL, quot); +#else serial_dl_write(up, quot); +#endif /* * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR diff -ruw linux-3.2.13/drivers/tty/serial/8250_early.c linux-3.2.13-fbx/drivers/tty/serial/8250_early.c --- linux-3.2.13/drivers/tty/serial/8250_early.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/tty/serial/8250_early.c 2013-06-13 15:06:41.394517787 +0200 @@ -121,8 +121,13 @@ lcr = serial_in(port, UART_LCR); serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); +#ifdef CONFIG_TANGO2 + dll = serial_in(port, UART_DL) & 0xff; + dlm = serial_in(port, UART_DL) >> 8; +#else dll = serial_in(port, UART_DLL); dlm = serial_in(port, UART_DLM); +#endif serial_out(port, UART_LCR, lcr); quot = (dlm << 8) | dll; @@ -143,8 +148,12 @@ divisor = port->uartclk / (16 * device->baud); c = serial_in(port, UART_LCR); serial_out(port, UART_LCR, c | UART_LCR_DLAB); +#ifdef CONFIG_TANGO2 + serial_out(port, UART_DL, divisor & 0xffff); +#else serial_out(port, UART_DLL, divisor & 0xff); serial_out(port, UART_DLM, (divisor >> 8) & 0xff); +#endif serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); } diff -ruw linux-3.2.13/drivers/tty/serial/8250_pci.c linux-3.2.13-fbx/drivers/tty/serial/8250_pci.c --- linux-3.2.13/drivers/tty/serial/8250_pci.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/tty/serial/8250_pci.c 2013-06-13 15:06:41.402517785 +0200 @@ -1060,7 +1060,7 @@ { int ret; - ret = setup_port(priv, port, 0, 0, board->reg_shift); + ret = setup_port(priv, port, idx, 0, board->reg_shift); port->iotype = UPIO_MEM32; port->type = PORT_XSCALE; port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); @@ -2530,8 +2530,8 @@ .first_offset = 0x1000, }, [pbn_ce4100_1_115200] = { - .flags = FL_BASE0, - .num_ports = 1, + .flags = FL_BASE_BARS, + .num_ports = 2, .base_baud = 921600, .reg_shift = 2, }, diff -ruw linux-3.2.13/drivers/usb/gadget/Kconfig linux-3.2.13-fbx/drivers/usb/gadget/Kconfig --- linux-3.2.13/drivers/usb/gadget/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/usb/gadget/Kconfig 2013-06-13 15:06:41.454517760 +0200 @@ -157,7 +157,7 @@ config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" - depends on FSL_SOC || ARCH_MXC + depends on FSL_SOC || ARCH_MXC || PLAT_ORION select USB_GADGET_DUALSPEED select USB_FSL_MPH_DR_OF if OF help diff -ruw linux-3.2.13/drivers/usb/gadget/Makefile linux-3.2.13-fbx/drivers/usb/gadget/Makefile --- linux-3.2.13/drivers/usb/gadget/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/usb/gadget/Makefile 2013-06-13 15:06:41.454517760 +0200 @@ -19,6 +19,7 @@ obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o fsl_usb2_udc-y := fsl_udc_core.o fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o +fsl_usb2_udc-$(CONFIG_PLAT_ORION) += fsl_orion_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o diff -ruw linux-3.2.13/drivers/usb/host/ehci-hcd.c linux-3.2.13-fbx/drivers/usb/host/ehci-hcd.c --- linux-3.2.13/drivers/usb/host/ehci-hcd.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/usb/host/ehci-hcd.c 2013-06-13 15:06:41.498517737 +0200 @@ -1329,6 +1329,16 @@ #define PLATFORM_DRIVER ehci_xls_driver #endif +#ifdef CONFIG_USB_EHCI_BCM63XX +#include "ehci-bcm63xx.c" +#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver +#endif + +#ifdef CONFIG_TANGO2 +#include "ehci-tango2.c" +#define PLATFORM_DRIVER ehci_hcd_tango2_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff -ruw linux-3.2.13/drivers/usb/host/ehci-hub.c linux-3.2.13-fbx/drivers/usb/host/ehci-hub.c --- linux-3.2.13/drivers/usb/host/ehci-hub.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/usb/host/ehci-hub.c 2013-06-13 15:06:41.498517737 +0200 @@ -813,12 +813,14 @@ * power switching; they're allowed to just limit the * current. khubd will turn the power back on. */ +#ifndef CONFIG_BCM63XX if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) { ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_POWER), status_reg); temp = ehci_readl(ehci, status_reg); } +#endif } /* whoever resumes must GetPortStatus to complete it!! */ diff -ruw linux-3.2.13/drivers/usb/host/Kconfig linux-3.2.13-fbx/drivers/usb/host/Kconfig --- linux-3.2.13/drivers/usb/host/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/usb/host/Kconfig 2013-06-13 15:06:41.494517739 +0200 @@ -106,7 +106,7 @@ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ PPC_MPC512x || CPU_CAVIUM_OCTEON || \ - PMC_MSP || SPARC_LEON) + PMC_MSP || SPARC_LEON || BCM63XX) default y config USB_EHCI_BIG_ENDIAN_DESC @@ -129,6 +129,14 @@ config USB_FSL_MPH_DR_OF tristate +config USB_EHCI_BCM63XX + bool "Support for Broadcom 63xx on-chip EHCI USB controller" + depends on USB_EHCI_HCD && BCM63XX + select USB_EHCI_BIG_ENDIAN_MMIO + ---help--- + Enables support for the on-chip EHCI controller on + BCM6358 and later chips. + config USB_EHCI_FSL bool "Support for Freescale on-chip EHCI USB controller" depends on USB_EHCI_HCD && FSL_SOC @@ -287,6 +295,15 @@ To compile this driver as a module, choose M here: the module will be called ohci-hcd. +config USB_OHCI_BCM63XX + bool "Support for Broadcom 63xx on-chip OHCI USB controller" + depends on USB_OHCI_HCD && BCM63XX + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + ---help--- + Enables support for the on-chip OHCI controller on + BCM63XX chips. + config USB_OHCI_HCD_OMAP1 bool "OHCI support for OMAP1/2 chips" depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2) diff -ruw linux-3.2.13/drivers/usb/storage/usb.c linux-3.2.13-fbx/drivers/usb/storage/usb.c --- linux-3.2.13/drivers/usb/storage/usb.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/usb/storage/usb.c 2013-06-13 15:06:41.558517710 +0200 @@ -78,7 +78,7 @@ MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); MODULE_LICENSE("GPL"); -static unsigned int delay_use = 1; +static unsigned int delay_use = 5; module_param(delay_use, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); diff -ruw linux-3.2.13/drivers/video/Kconfig linux-3.2.13-fbx/drivers/video/Kconfig --- linux-3.2.13/drivers/video/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/video/Kconfig 2013-06-13 15:06:41.762517612 +0200 @@ -477,6 +477,17 @@ this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. +config FB_SSD1327 + tristate "SSD1327 OLED driver" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_BACKLIGHT + select SPI + default n + config FB_ATARI bool "Atari native chipset support" depends on (FB = y) && ATARI diff -ruw linux-3.2.13/drivers/video/Makefile linux-3.2.13-fbx/drivers/video/Makefile --- linux-3.2.13/drivers/video/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/drivers/video/Makefile 2013-06-13 15:06:41.762517612 +0200 @@ -31,6 +31,7 @@ # Hardware specific drivers go first obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o obj-$(CONFIG_FB_ARC) += arcfb.o +obj-$(CONFIG_FB_SSD1327) += ssd1327.o obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o obj-$(CONFIG_FB_GRVGA) += grvga.o diff -ruw linux-3.2.13/firmware/Makefile linux-3.2.13-fbx/firmware/Makefile --- linux-3.2.13/firmware/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/firmware/Makefile 2013-06-13 15:06:42.366517322 +0200 @@ -68,6 +68,8 @@ fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ e100/d102e_ucode.bin +fw-shipped-$(CONFIG_MWL8K) += mwl8k/helper_8366.fw mwl8k/fmimage_8366_ap-2.fw \ + mwl8k/fmimage_8764.fw mwl8k/mfg_fmimage_8764.fw fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \ cis/DP83903.cis cis/NE2K.cis \ @@ -255,3 +257,10 @@ obj-n := dummy hostprogs-y := ihex2fw + +# hack for 'make mrproper' and mwl8k .fw files being removed. +quiet_cmd_shipped = SHIPPED $@ +cmd_shipped = cat $< > $@ + +%.fw: %.fw_shipped + $(call cmd,shipped) diff -ruw linux-3.2.13/fs/exec.c linux-3.2.13-fbx/fs/exec.c --- linux-3.2.13/fs/exec.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/exec.c 2013-06-13 15:06:42.546517234 +0200 @@ -61,6 +61,14 @@ #include #include "internal.h" +enum { + CORE_ENV_PID, + CORE_ENV_SIGNAL, + CORE_ENV_EXECUTABLE, + CORE_ENV_TIME, + CORE_ENV_NR, +}; + int core_uses_pid; char core_pattern[CORENAME_MAX_SIZE] = "core"; unsigned int core_pipe_limit; @@ -1238,6 +1246,13 @@ bprm->unsafe |= LSM_UNSAFE_PTRACE; } + /* + * This isn't strictly necessary, but it makes it harder for LSMs to + * mess up. + */ + if (current->no_new_privs) + bprm->unsafe |= LSM_UNSAFE_NO_NEW_PRIVS; + n_fs = 1; spin_lock(&p->fs->lock); rcu_read_lock(); @@ -1281,7 +1296,8 @@ bprm->cred->euid = current_euid(); bprm->cred->egid = current_egid(); - if (!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)) { + if (!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID) && + !current->no_new_privs) { /* Set-uid? */ if (mode & S_ISUID) { bprm->per_clear |= PER_CLEAR_ON_SETID; @@ -2093,7 +2109,8 @@ struct cred *cred; int retval = 0; int flag = 0; - int ispipe; + int ispipe, i; + char *helper_envp[CORE_ENV_NR + 1]; static atomic_t core_dump_count = ATOMIC_INIT(0); struct coredump_params cprm = { .signr = signr, @@ -2107,6 +2124,7 @@ .mm_flags = mm->flags, }; + memset(helper_envp, 0, sizeof (helper_envp)); audit_core_dumps(signr); binfmt = mm->binfmt; @@ -2146,6 +2164,7 @@ if (ispipe) { int dump_count; char **helper_argv; + struct timeval tv; if (ispipe < 0) { printk(KERN_WARNING "format_corename failed\n"); @@ -2191,9 +2210,22 @@ goto fail_dropcount; } + /* Set pipe helper environment */ + do_gettimeofday(&tv); + + helper_envp[CORE_ENV_PID] = kasprintf(GFP_KERNEL, + "CORE_PID=%d", current->tgid); + helper_envp[CORE_ENV_SIGNAL] = kasprintf(GFP_KERNEL, + "CORE_SIGNAL=%ld", signr); + helper_envp[CORE_ENV_EXECUTABLE] = kasprintf(GFP_KERNEL, + "CORE_EXECUTABLE=%s", current->comm); + helper_envp[CORE_ENV_TIME] = kasprintf(GFP_KERNEL, + "CORE_TIME=%lu", tv.tv_sec); + helper_envp[CORE_ENV_NR] = NULL; + retval = call_usermodehelper_fns(helper_argv[0], helper_argv, - NULL, UMH_WAIT_EXEC, umh_pipe_setup, - NULL, &cprm); + helper_envp, UMH_WAIT_EXEC, + umh_pipe_setup, NULL, &cprm); argv_free(helper_argv); if (retval) { printk(KERN_INFO "Core dump to %s pipe failed\n", @@ -2251,6 +2283,9 @@ kfree(cn.corename); fail_corename: coredump_finish(mm); + for (i = 0; i < CORE_ENV_NR; i++) + kfree(helper_envp[i]); + revert_creds(old_cred); fail_creds: put_cred(cred); diff -ruw linux-3.2.13/fs/hfsplus/hfsplus_fs.h linux-3.2.13-fbx/fs/hfsplus/hfsplus_fs.h --- linux-3.2.13/fs/hfsplus/hfsplus_fs.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/hfsplus/hfsplus_fs.h 2013-06-13 15:06:42.598517210 +0200 @@ -163,6 +163,7 @@ #define HFSPLUS_SB_HFSX 3 #define HFSPLUS_SB_CASEFOLD 4 #define HFSPLUS_SB_NOBARRIER 5 +#define HFSPLUS_SB_NOOWNERS 6 static inline struct hfsplus_sb_info *HFSPLUS_SB(struct super_block *sb) { diff -ruw linux-3.2.13/fs/hfsplus/inode.c linux-3.2.13-fbx/fs/hfsplus/inode.c --- linux-3.2.13/fs/hfsplus/inode.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/hfsplus/inode.c 2013-06-13 15:06:42.598517210 +0200 @@ -233,11 +233,13 @@ mode = be16_to_cpu(perms->mode); inode->i_uid = be32_to_cpu(perms->owner); - if (!inode->i_uid && !mode) + if ((!inode->i_uid && !mode) || + test_bit(HFSPLUS_SB_NOOWNERS, &sbi->flags)) inode->i_uid = sbi->uid; inode->i_gid = be32_to_cpu(perms->group); - if (!inode->i_gid && !mode) + if ((!inode->i_gid && !mode) || + test_bit(HFSPLUS_SB_NOOWNERS, &sbi->flags)) inode->i_gid = sbi->gid; if (dir) { @@ -290,12 +292,16 @@ static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr) { struct inode *inode = dentry->d_inode; + struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb); int error; error = inode_change_ok(inode, attr); if (error) return error; + if (test_bit(HFSPLUS_SB_NOOWNERS, &sbi->flags)) + attr->ia_valid &= ~(ATTR_UID | ATTR_GID); + if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size != i_size_read(inode)) { inode_dio_wait(inode); @@ -389,8 +395,13 @@ inode->i_ino = sbi->next_cnid++; inode->i_mode = mode; + if (test_bit(HFSPLUS_SB_NOOWNERS, &sbi->flags)) { + inode->i_uid = sbi->uid; + inode->i_gid = sbi->gid; + } else { inode->i_uid = current_fsuid(); inode->i_gid = current_fsgid(); + } set_nlink(inode, 1); inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC; diff -ruw linux-3.2.13/fs/hfsplus/options.c linux-3.2.13-fbx/fs/hfsplus/options.c --- linux-3.2.13/fs/hfsplus/options.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/hfsplus/options.c 2013-06-13 15:06:42.598517210 +0200 @@ -24,7 +24,7 @@ opt_part, opt_session, opt_nls, opt_nodecompose, opt_decompose, opt_barrier, opt_nobarrier, - opt_force, opt_err + opt_force, opt_noowners, opt_err }; static const match_table_t tokens = { @@ -41,6 +41,7 @@ { opt_barrier, "barrier" }, { opt_nobarrier, "nobarrier" }, { opt_force, "force" }, + { opt_noowners, "noowners" }, { opt_err, NULL } }; @@ -188,6 +189,9 @@ case opt_force: set_bit(HFSPLUS_SB_FORCE, &sbi->flags); break; + case opt_noowners: + set_bit(HFSPLUS_SB_NOOWNERS, &sbi->flags); + break; default: return 0; } @@ -226,5 +230,7 @@ seq_printf(seq, ",nodecompose"); if (test_bit(HFSPLUS_SB_NOBARRIER, &sbi->flags)) seq_printf(seq, ",nobarrier"); + if (test_bit(HFSPLUS_SB_NOOWNERS, &sbi->flags)) + seq_printf(seq, ",noowners"); return 0; } diff -ruw linux-3.2.13/fs/Kconfig linux-3.2.13-fbx/fs/Kconfig --- linux-3.2.13/fs/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/Kconfig 2013-06-13 15:06:42.398517306 +0200 @@ -172,6 +172,17 @@ config HUGETLB_PAGE def_bool HUGETLBFS +config RAMFS_XATTR + bool + default n + +config RAMFS_XATTR_USER + bool "Enable user extended attributes on RAMFS filesystem" + select RAMFS_XATTR + help + Select this to enable extended user attributes on RAMFS + filesystem. + source "fs/configfs/Kconfig" endmenu diff -ruw linux-3.2.13/fs/namespace.c linux-3.2.13-fbx/fs/namespace.c --- linux-3.2.13/fs/namespace.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/namespace.c 2013-06-13 15:06:42.622517198 +0200 @@ -1693,7 +1693,7 @@ static int flags_to_propagation_type(int flags) { - int type = flags & ~(MS_REC | MS_SILENT); + int type = flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE); /* Fail if any non-propagation flags are set */ if (type & ~(MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE)) diff -ruw linux-3.2.13/fs/open.c linux-3.2.13-fbx/fs/open.c --- linux-3.2.13/fs/open.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/open.c 2013-06-13 15:06:42.682517171 +0200 @@ -418,10 +418,39 @@ return error; } +static bool is_chrooted(struct fs_struct *fs) +{ + bool ret; + + /* + * This is equivalent to checking whether "/.." is the same + * directory as "/", where the ".." part ignores the current + * root. This logic is the same as follow_dotdot except that we + * ignore fs->root and we don't need to follow the final + * mountpoint we end up on. + */ + struct path path = fs->root; + path_get(&path); + while (true) { + if (path.dentry != path.mnt->mnt_root) { + ret = true; /* .. moves up within a vfsmount. */ + break; + } + + if (!follow_up(&path)) { + ret = false; /* We've hit the real root. */ + break; + } + } + path_put(&path); + return ret; +} + SYSCALL_DEFINE1(chroot, const char __user *, filename) { struct path path; int error; + struct fs_struct *fs = current->fs; error = user_path_dir(filename, &path); if (error) @@ -432,13 +461,26 @@ goto dput_and_out; error = -EPERM; - if (!capable(CAP_SYS_CHROOT)) + /* + * Chroot is dangerous unless no_new_privs is set, and we also + * don't want to allow unprivileged users to break out of chroot + * jail with another chroot call. + * + * We therefore allow chroot under one of two circumstances: + * a) no_new_privs (so setuid and similar programs can't be + * exploited), fs not shared (to avoid bypassing no_new_privs), + * and not already chrooted (so there's no chroot jail to break + * out of) + * b) CAP_SYS_CHROOT + */ + if (!(current->no_new_privs && fs->users == 1 && !is_chrooted(fs)) && + !capable(CAP_SYS_CHROOT)) goto dput_and_out; error = security_path_chroot(&path); if (error) goto dput_and_out; - set_fs_root(current->fs, &path); + set_fs_root(fs, &path); error = 0; dput_and_out: path_put(&path); diff -ruw linux-3.2.13/fs/ramfs/file-mmu.c linux-3.2.13-fbx/fs/ramfs/file-mmu.c --- linux-3.2.13/fs/ramfs/file-mmu.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/ramfs/file-mmu.c 2012-11-30 16:07:20.038641711 +0100 @@ -27,6 +27,7 @@ #include #include #include +#include #include "internal.h" @@ -52,4 +53,11 @@ const struct inode_operations ramfs_file_inode_operations = { .setattr = simple_setattr, .getattr = simple_getattr, +#ifdef CONFIG_RAMFS_XATTR + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .listxattr = generic_listxattr, + .removexattr = generic_removexattr, +#endif }; + diff -ruw linux-3.2.13/fs/ramfs/inode.c linux-3.2.13-fbx/fs/ramfs/inode.c --- linux-3.2.13/fs/ramfs/inode.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/ramfs/inode.c 2013-06-13 15:06:42.690517166 +0200 @@ -36,12 +36,14 @@ #include #include #include +#include #include "internal.h" #define RAMFS_DEFAULT_MODE 0755 static const struct super_operations ramfs_ops; static const struct inode_operations ramfs_dir_inode_operations; +static struct kmem_cache *ramfs_inode_cache; static struct backing_dev_info ramfs_backing_dev_info = { .name = "ramfs", @@ -51,6 +53,28 @@ BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP, }; +static struct inode *ramfs_alloc_inode(struct super_block *sb) +{ + struct ramfs_inode_info *rii; + + rii = kmem_cache_alloc(ramfs_inode_cache, GFP_KERNEL); + if (!rii) + return NULL; + return &rii->vfs_inode; +} + +static void ramfs_destroy_inode(struct inode *ino) +{ + struct ramfs_inode_info *rii; + + rii = RAMFS_I(ino); + +#ifdef CONFIG_RAMFS_XATTR + ramfs_inode_purge_xattrs(rii); +#endif + kmem_cache_free(ramfs_inode_cache, rii); +} + struct inode *ramfs_get_inode(struct super_block *sb, const struct inode *dir, int mode, dev_t dev) { @@ -148,9 +172,17 @@ .rmdir = simple_rmdir, .mknod = ramfs_mknod, .rename = simple_rename, +#ifdef CONFIG_RAMFS_XATTR + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .listxattr = generic_listxattr, + .removexattr = generic_removexattr, +#endif }; static const struct super_operations ramfs_ops = { + .alloc_inode = ramfs_alloc_inode, + .destroy_inode = ramfs_destroy_inode, .statfs = simple_statfs, .drop_inode = generic_delete_inode, .show_options = generic_show_options, @@ -232,6 +264,9 @@ sb->s_magic = RAMFS_MAGIC; sb->s_op = &ramfs_ops; sb->s_time_gran = 1; +#ifdef CONFIG_RAMFS_XATTR + sb->s_xattr = ramfs_xattr_handlers; +#endif inode = ramfs_get_inode(sb, NULL, S_IFDIR | fsi->mount_opts.mode, 0); if (!inode) { @@ -283,6 +318,16 @@ .kill_sb = kill_litter_super, }; +static void ramfs_inode_init_once(void *ptr) +{ + struct ramfs_inode_info *p = (struct ramfs_inode_info *)ptr; + + inode_init_once(&p->vfs_inode); +#ifdef CONFIG_RAMFS_XATTR_USER + INIT_LIST_HEAD(&p->xattr_user_list); +#endif +} + static int __init init_ramfs_fs(void) { return register_filesystem(&ramfs_fs_type); @@ -297,9 +342,18 @@ if (err) return err; - err = register_filesystem(&rootfs_fs_type); - if (err) + ramfs_inode_cache = kmem_cache_create("ramfs_inode_cache", + sizeof (struct ramfs_inode_info), + 0, 0, ramfs_inode_init_once); + if (!ramfs_inode_cache) { bdi_destroy(&ramfs_backing_dev_info); + return -ENOMEM; + } + err = register_filesystem(&rootfs_fs_type); + if (err) { + kmem_cache_destroy(ramfs_inode_cache); + bdi_destroy(&ramfs_backing_dev_info); + } return err; } diff -ruw linux-3.2.13/fs/ramfs/internal.h linux-3.2.13-fbx/fs/ramfs/internal.h --- linux-3.2.13/fs/ramfs/internal.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/ramfs/internal.h 2012-11-30 16:07:20.038641711 +0100 @@ -9,6 +9,42 @@ * 2 of the License, or (at your option) any later version. */ +#ifndef RAMFS_INTERNAL_H +# define RAMFS_INTERNAL_H + +/* need list_head */ +#include extern const struct address_space_operations ramfs_aops; extern const struct inode_operations ramfs_file_inode_operations; + + +struct ramfs_xattr +{ + char *name; + void *data; + size_t data_len; + + struct list_head list; +}; + +struct ramfs_inode_info +{ + struct inode vfs_inode; +#ifdef CONFIG_RAMFS_XATTR_USER + struct list_head xattr_user_list; +#endif +}; + +static inline struct ramfs_inode_info *RAMFS_I(struct inode *inode) +{ + return container_of(inode, struct ramfs_inode_info, vfs_inode); +} + +#ifdef CONFIG_RAMFS_XATTR +void ramfs_inode_purge_xattrs(struct ramfs_inode_info *rii); +extern const struct xattr_handler *ramfs_xattr_handlers[]; +#endif + + +#endif /* !RAMFS_INTERNAL_H */ diff -ruw linux-3.2.13/fs/ramfs/Makefile linux-3.2.13-fbx/fs/ramfs/Makefile --- linux-3.2.13/fs/ramfs/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/ramfs/Makefile 2012-11-30 16:07:20.038641711 +0100 @@ -6,4 +6,5 @@ file-mmu-y := file-nommu.o file-mmu-$(CONFIG_MMU) := file-mmu.o -ramfs-objs += inode.o $(file-mmu-y) +ramfs-xattr-$(CONFIG_RAMFS_XATTR) += xattr.o +ramfs-objs += inode.o $(file-mmu-y) $(ramfs-xattr-y) diff -ruw linux-3.2.13/fs/xfs/xfs_buf.c linux-3.2.13-fbx/fs/xfs/xfs_buf.c --- linux-3.2.13/fs/xfs/xfs_buf.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/xfs/xfs_buf.c 2013-06-13 15:06:42.730517147 +0200 @@ -378,6 +378,40 @@ return error; } +#ifdef CONFIG_MIPS +static void cache_flush_buf_page(xfs_buf_t *bp, int page_id) +{ + struct page *page; + void *vmaddr, *addr; + + if (!(bp->b_flags & XBF_MAPPED)) + return; + + if (bp->b_page_count <= 1) + return; + + page = bp->b_pages[page_id]; + vmaddr = bp->b_addr - bp->b_offset + (page_id * PAGE_CACHE_SIZE); + addr = page_address(page); + + if (pages_do_alias((unsigned long)addr, (unsigned long)vmaddr)) { + local_flush_data_cache_page(vmaddr); + local_flush_data_cache_page(addr); + } +} + +static void cache_flush_buf(xfs_buf_t *bp) +{ + unsigned int i; + + for (i = 0; i < bp->b_page_count; i++) + cache_flush_buf_page(bp, i); +} +#else +static inline void cache_flush_buf_page(xfs_buf_t *bp, int page_id) { } +static inline void cache_flush_buf(xfs_buf_t *bp) { } +#endif + /* * Map buffer into kernel address-space if necessary. */ @@ -406,6 +440,7 @@ return -ENOMEM; bp->b_addr += bp->b_offset; bp->b_flags |= XBF_MAPPED; + cache_flush_buf(bp); } return 0; @@ -1226,6 +1261,7 @@ if (nbytes > size) nbytes = size; + cache_flush_buf_page(bp, map_i); rbytes = bio_add_page(bio, bp->b_pages[map_i], nbytes, offset); if (rbytes < nbytes) break; diff -ruw linux-3.2.13/fs/xfs/xfs_dir2_block.c linux-3.2.13-fbx/fs/xfs/xfs_dir2_block.c --- linux-3.2.13/fs/xfs/xfs_dir2_block.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/xfs/xfs_dir2_block.c 2013-06-13 15:06:42.730517147 +0200 @@ -483,6 +483,9 @@ * Each object is a real entry (dep) or an unused one (dup). */ while (ptr < endptr) { + struct xfs_inode *inode; + unsigned int type; + dup = (xfs_dir2_data_unused_t *)ptr; /* * Unused, skip it. @@ -507,12 +510,20 @@ cook = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, (char *)dep - (char *)hdr); + if (xfs_iget(mp, NULL, be64_to_cpu(dep->inumber), 0, 0, + &inode) == 0) { + type = (inode->i_d.di_mode >> 12) & 0xf; + xfs_iunlock(inode, 0); + IRELE(inode); + } else + type = DT_UNKNOWN; + /* * If it didn't fit, set the final offset to here & return. */ if (filldir(dirent, (char *)dep->name, dep->namelen, cook & 0x7fffffff, be64_to_cpu(dep->inumber), - DT_UNKNOWN)) { + type)) { *offset = cook & 0x7fffffff; xfs_da_brelse(NULL, bp); return 0; diff -ruw linux-3.2.13/fs/xfs/xfs_dir2_leaf.c linux-3.2.13-fbx/fs/xfs/xfs_dir2_leaf.c --- linux-3.2.13/fs/xfs/xfs_dir2_leaf.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/xfs/xfs_dir2_leaf.c 2013-06-13 15:06:42.734517146 +0200 @@ -836,6 +836,9 @@ * Get more blocks and readahead as necessary. */ while (curoff < XFS_DIR2_LEAF_OFFSET) { + struct xfs_inode *inode; + unsigned int type; + /* * If we have no buffer, or we're off the end of the * current buffer, need to get another one. @@ -1097,9 +1100,17 @@ dep = (xfs_dir2_data_entry_t *)ptr; length = xfs_dir2_data_entsize(dep->namelen); + if (xfs_iget(mp, NULL, be64_to_cpu(dep->inumber), 0, 0, + &inode) == 0) { + type = (inode->i_d.di_mode >> 12) & 0xf; + xfs_iunlock(inode, 0); + IRELE(inode); + } else + type = DT_UNKNOWN; + if (filldir(dirent, (char *)dep->name, dep->namelen, xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff, - be64_to_cpu(dep->inumber), DT_UNKNOWN)) + be64_to_cpu(dep->inumber), type)) break; /* diff -ruw linux-3.2.13/fs/xfs/xfs_dir2_sf.c linux-3.2.13-fbx/fs/xfs/xfs_dir2_sf.c --- linux-3.2.13/fs/xfs/xfs_dir2_sf.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/fs/xfs/xfs_dir2_sf.c 2013-06-13 15:06:42.734517146 +0200 @@ -843,6 +843,9 @@ */ sfep = xfs_dir2_sf_firstentry(sfp); for (i = 0; i < sfp->count; i++) { + struct xfs_inode *inode; + unsigned int type; + off = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, xfs_dir2_sf_get_offset(sfep)); @@ -852,8 +855,16 @@ } ino = xfs_dir2_sfe_get_ino(sfp, sfep); + + if (xfs_iget(mp, NULL, ino, 0, 0, &inode) == 0) { + type = (inode->i_d.di_mode >> 12) & 0xf; + xfs_iunlock(inode, 0); + IRELE(inode); + } else + type = DT_UNKNOWN; + if (filldir(dirent, (char *)sfep->name, sfep->namelen, - off & 0x7fffffff, ino, DT_UNKNOWN)) { + off & 0x7fffffff, ino, type)) { *offset = off & 0x7fffffff; return 0; } diff -ruw linux-3.2.13/include/asm-generic/siginfo.h linux-3.2.13-fbx/include/asm-generic/siginfo.h --- linux-3.2.13/include/asm-generic/siginfo.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/asm-generic/siginfo.h 2013-06-13 15:06:42.770517128 +0200 @@ -90,9 +90,18 @@ __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ int _fd; } _sigpoll; + + /* SIGSYS */ + struct { + void __user *_call_addr; /* calling user insn */ + int _syscall; /* triggering system call number */ + unsigned int _arch; /* AUDIT_ARCH_* of syscall */ + } _sigsys; } _sifields; } siginfo_t; +/* If the arch shares siginfo, then it has SIGSYS. */ +#define __ARCH_SIGSYS #endif /* @@ -116,6 +125,11 @@ #define si_addr_lsb _sifields._sigfault._addr_lsb #define si_band _sifields._sigpoll._band #define si_fd _sifields._sigpoll._fd +#ifdef __ARCH_SIGSYS +#define si_call_addr _sifields._sigsys._call_addr +#define si_syscall _sifields._sigsys._syscall +#define si_arch _sifields._sigsys._arch +#endif #ifdef __KERNEL__ #define __SI_MASK 0xffff0000u @@ -126,6 +140,7 @@ #define __SI_CHLD (4 << 16) #define __SI_RT (5 << 16) #define __SI_MESGQ (6 << 16) +#define __SI_SYS (7 << 16) #define __SI_CODE(T,N) ((T) | ((N) & 0xffff)) #else #define __SI_KILL 0 @@ -135,6 +150,7 @@ #define __SI_CHLD 0 #define __SI_RT 0 #define __SI_MESGQ 0 +#define __SI_SYS 0 #define __SI_CODE(T,N) (N) #endif @@ -232,6 +248,12 @@ #define NSIGPOLL 6 /* + * SIGSYS si_codes + */ +#define SYS_SECCOMP (__SI_SYS|1) /* seccomp triggered */ +#define NSIGSYS 1 + +/* * sigevent definitions * * It seems likely that SIGEV_THREAD will have to be handled from diff -ruw linux-3.2.13/include/linux/audit.h linux-3.2.13-fbx/include/linux/audit.h --- linux-3.2.13/include/linux/audit.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/audit.h 2013-06-13 15:06:42.778517124 +0200 @@ -430,6 +430,7 @@ extern void __audit_inode(const char *name, const struct dentry *dentry); extern void __audit_inode_child(const struct dentry *dentry, const struct inode *parent); +extern void __audit_seccomp(unsigned long syscall, long signr); extern void __audit_ptrace(struct task_struct *t); static inline int audit_dummy_context(void) @@ -453,6 +454,12 @@ } void audit_core_dumps(long signr); +static inline void audit_seccomp(unsigned long syscall, long signr) +{ + if (unlikely(!audit_dummy_context())) + __audit_seccomp(syscall, signr); +} + static inline void audit_ptrace(struct task_struct *t) { if (unlikely(!audit_dummy_context())) @@ -558,6 +565,7 @@ #define audit_inode(n,d) do { (void)(d); } while (0) #define audit_inode_child(i,p) do { ; } while (0) #define audit_core_dumps(i) do { ; } while (0) +#define audit_seccomp(i, s) do { ; } while (0) #define auditsc_get_stamp(c,t,s) (0) #define audit_get_loginuid(t) (-1) #define audit_get_sessionid(t) (-1) diff -ruw linux-3.2.13/include/linux/filter.h linux-3.2.13-fbx/include/linux/filter.h --- linux-3.2.13/include/linux/filter.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/filter.h 2013-06-13 15:06:42.802517113 +0200 @@ -10,6 +10,7 @@ #ifdef __KERNEL__ #include +#include #endif /* @@ -132,6 +133,16 @@ #ifdef __KERNEL__ +#ifdef CONFIG_COMPAT +/* + * A struct sock_filter is architecture independent. + */ +struct compat_sock_fprog { + u16 len; + compat_uptr_t filter; /* struct sock_filter * */ +}; +#endif + struct sk_buff; struct sock; @@ -228,6 +239,7 @@ BPF_S_ANC_HATYPE, BPF_S_ANC_RXHASH, BPF_S_ANC_CPU, + BPF_S_ANC_SECCOMP_LD_W, }; #endif /* __KERNEL__ */ diff -ruw linux-3.2.13/include/linux/if_tunnel.h linux-3.2.13-fbx/include/linux/if_tunnel.h --- linux-3.2.13/include/linux/if_tunnel.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/if_tunnel.h 2013-06-13 15:06:42.814517105 +0200 @@ -38,6 +38,11 @@ __be16 o_flags; __be32 i_key; __be32 o_key; + + /* this is the first bits to match on ipv6 address */ + struct in6_addr fbx6to4_zone; + __u8 fbx6to4_prefix; + struct iphdr iph; }; diff -ruw linux-3.2.13/include/linux/in.h linux-3.2.13-fbx/include/linux/in.h --- linux-3.2.13/include/linux/in.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/in.h 2013-06-13 15:06:42.814517105 +0200 @@ -264,6 +264,9 @@ return 0; case IPPROTO_AH: /* SPI */ return 4; + case IPPROTO_IPV6: + /* third byte of ipv6 destination address */ + return 36; default: return -EINVAL; } diff -ruw linux-3.2.13/include/linux/Kbuild linux-3.2.13-fbx/include/linux/Kbuild --- linux-3.2.13/include/linux/Kbuild 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/Kbuild 2013-06-13 15:06:42.778517124 +0200 @@ -126,6 +126,10 @@ header-y += fanotify.h header-y += fb.h header-y += fcntl.h +header-y += fbxatm.h +header-y += fbxbridge.h +header-y += fbxjtag.h +header-y += fbxmtd_map_ioctl.h header-y += fd.h header-y += fdreg.h header-y += fib_rules.h @@ -327,6 +331,7 @@ header-y += sched.h header-y += screen_info.h header-y += sdla.h +header-y += seccomp.h header-y += securebits.h header-y += selinux_netlink.h header-y += sem.h @@ -400,3 +405,5 @@ header-y += x25.h header-y += xattr.h header-y += xfrm.h +header-y += remoti/ +header-y += hdmi-cec/ diff -ruw linux-3.2.13/include/linux/major.h linux-3.2.13-fbx/include/linux/major.h --- linux-3.2.13/include/linux/major.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/major.h 2012-11-30 16:07:20.430641729 +0100 @@ -171,7 +171,16 @@ #define VIOTAPE_MAJOR 230 -#define BLOCK_EXT_MAJOR 259 +/* + * Until userland gets decent support for large majors number (if the + * day ever comes), use 242 for BLOCK_EXT_MAJOR. According to + * devices.txt area 240 to 254 is assigned for "LOCAL/EXPERIMENTAL + * USE". This kind of hack would fall in this category. + */ +/* #define BLOCK_EXT_MAJOR 259 */ +#define BLOCK_EXT_MAJOR 242 + + #define SCSI_OSD_MAJOR 260 /* open-osd's OSD scsi device */ #endif diff -ruw linux-3.2.13/include/linux/mtd/mtd.h linux-3.2.13-fbx/include/linux/mtd/mtd.h --- linux-3.2.13/include/linux/mtd/mtd.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/mtd/mtd.h 2013-06-13 15:06:42.834517098 +0200 @@ -157,6 +157,11 @@ unsigned int erasesize_mask; unsigned int writesize_mask; + /* NAND related attributes */ + const char *nand_type; + const char *nand_manufacturer; + const char *onfi_version; + // Kernel-only stuff starts here. const char *name; int index; diff -ruw linux-3.2.13/include/linux/mtd/nand.h linux-3.2.13-fbx/include/linux/mtd/nand.h --- linux-3.2.13/include/linux/mtd/nand.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/mtd/nand.h 2013-06-13 15:06:42.834517098 +0200 @@ -213,7 +213,8 @@ #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) /* Large page NAND with SOFT_ECC should support subpage reads */ #define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \ - && (chip->page_shift > 9)) + && (chip->page_shift > 9) \ + && !(chip->options & NAND_NO_RNDOUT)) /* Mask to zero out the chip options, which come from the id table */ #define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) @@ -229,6 +230,10 @@ /* Chip may not exist, so silence any errors in scan */ #define NAND_SCAN_SILENT_NODEV 0x00040000 + +/* NAND controller does not want RNDOUT commands, even in NAND_ECC_SOFT */ +#define NAND_NO_RNDOUT 0x00800000 + /* Options set by nand scan */ /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 diff -ruw linux-3.2.13/include/linux/netdevice.h linux-3.2.13-fbx/include/linux/netdevice.h --- linux-3.2.13/include/linux/netdevice.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/netdevice.h 2013-06-13 15:06:42.834517098 +0200 @@ -1288,6 +1288,11 @@ /* GARP */ struct garp_port __rcu *garp_port; +#if defined(CONFIG_FBXBRIDGE) || defined(CONFIG_FBXBRIDGE_MODULE) + struct fbxbridge *fbx_bridge; + struct fbxbridge *fbx_bridge_port; +#endif + /* class/net/name entry */ struct device dev; /* space for optional device, statistics, and wireless sysfs groups */ diff -ruw linux-3.2.13/include/linux/netfilter/nf_conntrack_ftp.h linux-3.2.13-fbx/include/linux/netfilter/nf_conntrack_ftp.h --- linux-3.2.13/include/linux/netfilter/nf_conntrack_ftp.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/netfilter/nf_conntrack_ftp.h 2012-11-30 16:07:20.466641731 +0100 @@ -25,6 +25,11 @@ u_int32_t seq_aft_nl[IP_CT_DIR_MAX][NUM_SEQ_TO_REMEMBER]; /* 0 means seq_match_aft_nl not set */ int seq_aft_nl_num[IP_CT_DIR_MAX]; +#if defined(CONFIG_FREEBOX_BRIDGE) || defined(CONFIG_FREEBOX_BRIDGE_MODULE) + unsigned int is_fbxbridge; + unsigned long fbxbridge_remote; + unsigned long fbxbridge_wan; +#endif }; struct nf_conntrack_expect; diff -ruw linux-3.2.13/include/linux/ppp_channel.h linux-3.2.13-fbx/include/linux/ppp_channel.h --- linux-3.2.13/include/linux/ppp_channel.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/ppp_channel.h 2012-11-30 16:07:20.534641734 +0100 @@ -49,6 +49,9 @@ /* Called by the channel when it can send some more data. */ extern void ppp_output_wakeup(struct ppp_channel *); +/* Called by the channel when it want to prevent further transmit on it */ +extern void ppp_output_stop(struct ppp_channel *); + /* Called by the channel to process a received PPP packet. The packet should have just the 2-byte PPP protocol header. */ extern void ppp_input(struct ppp_channel *, struct sk_buff *); diff -ruw linux-3.2.13/include/linux/prctl.h linux-3.2.13-fbx/include/linux/prctl.h --- linux-3.2.13/include/linux/prctl.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/prctl.h 2013-06-13 15:06:42.854517088 +0200 @@ -102,4 +102,31 @@ #define PR_MCE_KILL_GET 34 +/* + * If no_new_privs is set, then operations that grant new privileges (i.e. + * execve) will either fail or not grant them. This affects suid/sgid, + * file capabilities, and LSMs. + * + * Operations that merely manipulate or drop existing privileges (setresuid, + * capset, etc.) will still work. Drop those privileges if you want them gone. + * + * Changing LSM security domain is considered a new privilege. So, for example, + * asking selinux for a specific new context (e.g. with runcon) will result + * in execve returning -EPERM. + */ +#define PR_SET_NO_NEW_PRIVS 36 +#define PR_GET_NO_NEW_PRIVS 37 + +#define PR_SET_JAIL 38 +#define PR_GET_JAIL 39 +#define PR_JAIL_EXEC_ALL 0x0 +#define PR_JAIL_EXEC_ONCE 0x1 +#define PR_JAIL_EXEC_NO 0x2 + +#define PR_SET_JAIL_ENTRIES 40 + +#define PR_ADD_JAIL_FILES 41 +#define PR_JAIL_FILE_READ 0x1 +#define PR_JAIL_FILE_WRITE 0x2 + #endif /* _LINUX_PRCTL_H */ diff -ruw linux-3.2.13/include/linux/printk.h linux-3.2.13-fbx/include/linux/printk.h --- linux-3.2.13/include/linux/printk.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/printk.h 2013-06-13 15:06:42.854517088 +0200 @@ -99,6 +99,7 @@ int vprintk(const char *fmt, va_list args); asmlinkage __printf(1, 2) __cold int printk(const char *fmt, ...); +extern void console_emergency_dump(char *buf, int *len); /* * Please don't use printk_ratelimit(), because it shares ratelimiting state @@ -144,6 +145,10 @@ static inline void setup_log_buf(int early) { } + +static inline void console_emergency_dump(char *buf, int *len) +{ +} #endif extern void dump_stack(void) __cold; diff -ruw linux-3.2.13/include/linux/ptrace.h linux-3.2.13-fbx/include/linux/ptrace.h --- linux-3.2.13/include/linux/ptrace.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/ptrace.h 2013-06-13 15:06:42.854517088 +0200 @@ -62,8 +62,9 @@ #define PTRACE_O_TRACEEXEC 0x00000010 #define PTRACE_O_TRACEVFORKDONE 0x00000020 #define PTRACE_O_TRACEEXIT 0x00000040 +#define PTRACE_O_TRACESECCOMP 0x00000080 -#define PTRACE_O_MASK 0x0000007f +#define PTRACE_O_MASK 0x000000ff /* Wait extended result codes for the above trace options. */ #define PTRACE_EVENT_FORK 1 @@ -73,6 +74,7 @@ #define PTRACE_EVENT_VFORK_DONE 5 #define PTRACE_EVENT_EXIT 6 #define PTRACE_EVENT_STOP 7 +#define PTRACE_EVENT_SECCOMP 8 #include @@ -101,8 +103,9 @@ #define PT_TRACE_EXEC PT_EVENT_FLAG(PTRACE_EVENT_EXEC) #define PT_TRACE_VFORK_DONE PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE) #define PT_TRACE_EXIT PT_EVENT_FLAG(PTRACE_EVENT_EXIT) +#define PT_TRACE_SECCOMP PT_EVENT_FLAG(PTRACE_EVENT_SECCOMP) -#define PT_TRACE_MASK 0x000003f4 +#define PT_TRACE_MASK 0x00000ff4 /* single stepping state bits (used on ARM and PA-RISC) */ #define PT_SINGLESTEP_BIT 31 diff -ruw linux-3.2.13/include/linux/sched.h linux-3.2.13-fbx/include/linux/sched.h --- linux-3.2.13/include/linux/sched.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/sched.h 2013-06-13 15:06:42.886517073 +0200 @@ -1297,6 +1297,8 @@ * execve */ unsigned in_iowait:1; + /* task may not gain privileges */ + unsigned no_new_privs:1; /* Revert to default priority/policy when forking */ unsigned sched_reset_on_fork:1; @@ -1401,7 +1403,7 @@ uid_t loginuid; unsigned int sessionid; #endif - seccomp_t seccomp; + struct seccomp seccomp; /* Thread group tracking */ u32 parent_exec_id; diff -ruw linux-3.2.13/include/linux/seccomp.h linux-3.2.13-fbx/include/linux/seccomp.h --- linux-3.2.13/include/linux/seccomp.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/seccomp.h 2013-06-13 15:06:42.886517073 +0200 @@ -1,25 +1,89 @@ #ifndef _LINUX_SECCOMP_H #define _LINUX_SECCOMP_H +#include +#include + +/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, ) */ +#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */ +#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */ +#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */ + +/* + * All BPF programs must return a 32-bit value. + * The bottom 16-bits are for optional return data. + * The upper 16-bits are ordered from least permissive values to most. + * + * The ordering ensures that a min_t() over composed return values always + * selects the least permissive choice. + */ +#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */ +#define SECCOMP_RET_TRAP 0x00020000U /* disallow and force a SIGSYS */ +#define SECCOMP_RET_ERRNO 0x00030000U /* returns an errno */ +#define SECCOMP_RET_TRACE 0x7ffe0000U /* pass to a tracer or disallow */ +#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ + +/* Masks for the return value sections. */ +#define SECCOMP_RET_ACTION 0xffff0000U +#define SECCOMP_RET_DATA 0x0000ffffU + +/** + * struct seccomp_data - the format the BPF program executes over. + * @nr: the system call number + * @arch: indicates system call convention as an AUDIT_ARCH_* value + * as defined in . + * @instruction_pointer: at the time of the system call. + * @args: up to 6 system call arguments always stored as 64-bit values + * regardless of the architecture. + */ +struct seccomp_data { + int nr; + __u32 arch; + __u64 instruction_pointer; + __u64 args[6]; +}; + +#ifdef __KERNEL__ #ifdef CONFIG_SECCOMP #include #include -typedef struct { int mode; } seccomp_t; - -extern void __secure_computing(int); -static inline void secure_computing(int this_syscall) +struct seccomp_filter; +/** + * struct seccomp - the state of a seccomp'ed process + * + * @mode: indicates one of the valid values above for controlled + * system calls available to a process. + * @filter: The metadata and ruleset for determining what system calls + * are allowed for a task. + * + * @filter must only be accessed from the context of current as there + * is no locking. + */ +struct seccomp { + int mode; + struct seccomp_filter *filter; +}; + +/* + * Direct callers to __secure_computing should be updated as + * CONFIG_HAVE_ARCH_SECCOMP_FILTER propagates. + */ +extern void __secure_computing(int) __deprecated; +extern int __secure_computing_int(int); +static inline int secure_computing(int this_syscall) { if (unlikely(test_thread_flag(TIF_SECCOMP))) - __secure_computing(this_syscall); + return __secure_computing_int(this_syscall); + return 0; } extern long prctl_get_seccomp(void); -extern long prctl_set_seccomp(unsigned long); +extern long prctl_set_seccomp(unsigned long, char __user *); -static inline int seccomp_mode(seccomp_t *s) +static inline int seccomp_mode(struct seccomp *s) { return s->mode; } @@ -28,25 +92,43 @@ #include -typedef struct { } seccomp_t; +struct seccomp { }; +struct seccomp_filter { }; -#define secure_computing(x) do { } while (0) +static inline int secure_computing(int this_syscall) +{ + return 0; +} static inline long prctl_get_seccomp(void) { return -EINVAL; } -static inline long prctl_set_seccomp(unsigned long arg2) +static inline long prctl_set_seccomp(unsigned long arg2, char __user *arg3) { return -EINVAL; } -static inline int seccomp_mode(seccomp_t *s) +static inline int seccomp_mode(struct seccomp *s) { return 0; } - #endif /* CONFIG_SECCOMP */ +#ifdef CONFIG_SECCOMP_FILTER +extern void put_seccomp_filter(struct task_struct *tsk); +extern void get_seccomp_filter(struct task_struct *tsk); +extern u32 seccomp_bpf_load(int off); +#else /* CONFIG_SECCOMP_FILTER */ +static inline void put_seccomp_filter(struct task_struct *tsk) +{ + return; +} +static inline void get_seccomp_filter(struct task_struct *tsk) +{ + return; +} +#endif /* CONFIG_SECCOMP_FILTER */ +#endif /* __KERNEL__ */ #endif /* _LINUX_SECCOMP_H */ diff -ruw linux-3.2.13/include/linux/security.h linux-3.2.13-fbx/include/linux/security.h --- linux-3.2.13/include/linux/security.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/security.h 2013-06-13 15:06:42.886517073 +0200 @@ -130,6 +130,7 @@ #define LSM_UNSAFE_SHARE 1 #define LSM_UNSAFE_PTRACE 2 #define LSM_UNSAFE_PTRACE_CAP 4 +#define LSM_UNSAFE_NO_NEW_PRIVS 8 #ifdef CONFIG_MMU /* diff -ruw linux-3.2.13/include/linux/serial_reg.h linux-3.2.13-fbx/include/linux/serial_reg.h --- linux-3.2.13/include/linux/serial_reg.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/serial_reg.h 2012-11-30 16:07:20.582641736 +0100 @@ -18,9 +18,18 @@ * DLAB=0 */ #define UART_RX 0 /* In: Receive buffer */ +#ifdef CONFIG_TANGO2 +#define UART_TX 1 /* Out: Transmit buffer */ +#else #define UART_TX 0 /* Out: Transmit buffer */ +#endif +#ifdef CONFIG_TANGO2 +#define UART_IER 2 /* Out: Interrupt Enable Register */ +#else #define UART_IER 1 /* Out: Interrupt Enable Register */ +#endif + #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ @@ -30,7 +39,12 @@ */ #define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ +#ifdef CONFIG_TANGO2 +#define UART_IIR 3 /* In: Interrupt ID Register */ +#else #define UART_IIR 2 /* In: Interrupt ID Register */ +#endif + #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ #define UART_IIR_MSI 0x00 /* Modem status interrupt */ @@ -40,7 +54,12 @@ #define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ +#ifdef CONFIG_TANGO2 +#define UART_FCR 4 /* Out: FIFO Control Register */ +#else #define UART_FCR 2 /* Out: FIFO Control Register */ +#endif + #define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ #define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ #define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ @@ -84,7 +103,12 @@ #define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ #define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ +#ifdef CONFIG_TANGO2 +#define UART_LCR 5 /* Out: Line Control Register */ +#else #define UART_LCR 3 /* Out: Line Control Register */ +#endif + /* * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. @@ -107,7 +131,11 @@ #define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */ #define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */ +#ifdef CONFIG_TANGO2 +#define UART_MCR 6 /* Out: Modem Control Register */ +#else #define UART_MCR 4 /* Out: Modem Control Register */ +#endif #define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */ #define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */ #define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */ @@ -118,8 +146,14 @@ #define UART_MCR_RTS 0x02 /* RTS complement */ #define UART_MCR_DTR 0x01 /* DTR complement */ +#ifdef CONFIG_TANGO2 +#define UART_LSR 7 /* In: Line Status Register */ +#else #define UART_LSR 5 /* In: Line Status Register */ +#endif + #define UART_LSR_FIFOE 0x80 /* Fifo error */ + #define UART_LSR_TEMT 0x40 /* Transmitter empty */ #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ #define UART_LSR_BI 0x10 /* Break interrupt indicator */ @@ -129,7 +163,11 @@ #define UART_LSR_DR 0x01 /* Receiver data ready */ #define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */ +#ifdef CONFIG_TANGO2 +#define UART_MSR 8 /* In: Modem Status Register */ +#else #define UART_MSR 6 /* In: Modem Status Register */ +#endif #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ #define UART_MSR_RI 0x40 /* Ring Indicator */ #define UART_MSR_DSR 0x20 /* Data Set Ready */ @@ -140,18 +178,37 @@ #define UART_MSR_DCTS 0x01 /* Delta CTS */ #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ +#ifdef CONFIG_TANGO2 +#define UART_SCR 9 /* I/O: Scratch Register */ +#else #define UART_SCR 7 /* I/O: Scratch Register */ +#endif /* * DLAB=1 */ +#ifdef CONFIG_TANGO2 +/* + * smp863x has DLM and DLM in one register + */ +#define UART_DL 10 +#define UART_CLKSEL 11 /* Clock selection */ +#else #define UART_DLL 0 /* Out: Divisor Latch Low */ #define UART_DLM 1 /* Out: Divisor Latch High */ +#endif /* * LCR=0xBF (or DLAB=1 for 16C660) */ +#ifdef CONFIG_TANGO2 +/* EFR does not exist on TANGO2, we use a magic to catch accesses and + * make them nop */ +#define UART_EFR 42 +#else #define UART_EFR 2 /* I/O: Extended Features Register */ +#endif + #define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */ #define UART_EFR_CTS 0x80 /* CTS flow control */ #define UART_EFR_RTS 0x40 /* RTS flow control */ diff -ruw linux-3.2.13/include/linux/skbuff.h linux-3.2.13-fbx/include/linux/skbuff.h --- linux-3.2.13/include/linux/skbuff.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/skbuff.h 2013-06-13 15:06:42.890517070 +0200 @@ -309,6 +309,13 @@ #define NET_SKBUFF_NF_DEFRAG_NEEDED 1 #endif +enum { + FFN_STATE_INIT = 0, + FFN_STATE_FORWARDABLE, + FFN_STATE_FAST_FORWARDED, + FFN_STATE_INCOMPATIBLE, +}; + /** * struct sk_buff - socket buffer * @next: Next buffer in list @@ -423,6 +430,9 @@ #endif #ifdef NET_SKBUFF_NF_DEFRAG_NEEDED struct sk_buff *nfct_reasm; +#ifdef CONFIG_IP_FFN + int ffn_state; +#endif #endif #ifdef CONFIG_BRIDGE_NETFILTER struct nf_bridge_info *nf_bridge; @@ -460,6 +470,8 @@ __u32 dropcount; }; + __u32 rx_class; + __u16 vlan_tci; sk_buff_data_t transport_header; @@ -1532,6 +1544,10 @@ * get_rps_cpus() for example only access one 64 bytes aligned block : * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8) */ +#ifdef CONFIG_NETSKBPAD +#define NET_SKB_PAD CONFIG_NETSKBPAD +#endif + #ifndef NET_SKB_PAD #define NET_SKB_PAD max(32, L1_CACHE_BYTES) #endif diff -ruw linux-3.2.13/include/linux/sockios.h linux-3.2.13-fbx/include/linux/sockios.h --- linux-3.2.13/include/linux/sockios.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/sockios.h 2012-11-30 16:07:20.586641737 +0100 @@ -127,6 +127,14 @@ /* hardware time stamping: parameters in linux/net_tstamp.h */ #define SIOCSHWTSTAMP 0x89b0 +/* fbxdiverter call */ +#define SIOCGFBXDIVERT 0x89c0 /* fbxdiverter support */ +#define SIOCSFBXDIVERT 0x89c1 /* Set fbxdiverter options */ + +/* fbxbridge call */ +#define SIOCGFBXBRIDGE 0x89b2 /* fbxbridge support */ +#define SIOCSFBXBRIDGE 0x89b3 /* Set fbxbridge options */ + /* Device private ioctl calls */ /* diff -ruw linux-3.2.13/include/linux/tty.h linux-3.2.13-fbx/include/linux/tty.h --- linux-3.2.13/include/linux/tty.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/tty.h 2013-06-13 15:06:42.902517064 +0200 @@ -34,6 +34,7 @@ #define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ #define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ #define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ +#define N_REMOTI 25 /* RemoTI over UART */ #ifdef __KERNEL__ #include diff -ruw linux-3.2.13/include/net/ip.h linux-3.2.13-fbx/include/net/ip.h --- linux-3.2.13/include/net/ip.h 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/include/net/ip.h 2013-06-13 15:06:42.922517053 +0200 @@ -423,6 +423,20 @@ int ip_frag_nqueues(struct net *net); /* + * Functions provided by ip_ffn.c + */ + +enum { + IP_FFN_FINISH_OUT, + IP_FFN_LOCAL_IN, +}; + +extern void ip_ffn_init(void); +extern int ip_ffn_process(struct sk_buff *skb); +extern void ip_ffn_add(struct sk_buff *skb, int when); +extern void ip_ffn_flush_all(void); + +/* * Functions provided by ip_forward.c */ diff -ruw linux-3.2.13/init/do_mounts.c linux-3.2.13-fbx/init/do_mounts.c --- linux-3.2.13/init/do_mounts.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/init/do_mounts.c 2013-06-13 15:06:42.990517021 +0200 @@ -17,6 +17,10 @@ #include #include +#ifdef CONFIG_DMCRYPTATBOOT +#include +#endif + #include #include #include @@ -496,6 +500,121 @@ #endif } +#ifdef CONFIG_DMCRYPTATBOOT +/* + * Create dm device + */ +long dm_ctl_ioctl(struct file *file, uint command, ulong u); + +static int dm_run_setup(void) +{ + struct dm_ioctl dm, *dmp; + struct dm_target_spec *spec; + uint64_t size; + char *data, *tmp, *major, *minor; + uint8_t *target_info; + dev_t tomap; + int ret, fd; + uint8_t key[128]; + + /* read config */ + ret = -EINVAL; + tmp = CONFIG_DMCRYPTATBOOT_DEVICE; + major = minor = NULL; + if (tmp) + major = strsep(&tmp, ":"); + if (tmp) + minor = strsep(&tmp, ":"); + if (!major || !minor) + goto end; + + /* create device to map */ + tomap = MKDEV(simple_strtoul(major, NULL, 10), + simple_strtoul(minor, NULL, 10)); + if (create_dev("/dev/tomap", tomap)) + goto end; + + fd = sys_open("/dev/tomap", 0, 0); + if (fd < 0) + goto end; + + /* fetch its size */ + if (sys_ioctl(fd, BLKGETSIZE64, (unsigned long)&size)) { + sys_close(fd); + goto end; + } + sys_close(fd); + size /= 512; + + /* create dm device */ + memset(&dm, 0, sizeof (dm)); + dm.version[0] = DM_VERSION_MAJOR; + dm.version[1] = DM_VERSION_MINOR; + dm.version[2] = DM_VERSION_PATCHLEVEL; + dm.data_size = sizeof (dm); + strcpy(dm.name, "root"); + + ret = dm_ctl_ioctl(NULL, DM_DEV_CREATE, (ulong)&dm); + if (ret < 0) { + printk("dm_ctl_ioctl create failed\n"); + goto end; + } + + /* create table */ + data = kmalloc(sizeof (*dmp) + sizeof (*spec) + 128, GFP_KERNEL); + if (!data) + goto end; + dmp = (struct dm_ioctl *)data; + spec = (struct dm_target_spec *)(dmp + 1); + target_info = (uint8_t *)(spec + 1); + + memset(dmp, 0, sizeof (*dmp)); + dmp->version[0] = DM_VERSION_MAJOR; + dmp->version[1] = DM_VERSION_MINOR; + dmp->version[2] = DM_VERSION_PATCHLEVEL; + dmp->data_size = sizeof (*dmp) + sizeof (*spec) + 128; + dmp->data_start = sizeof (*dmp); + dmp->target_count = 1; + strcpy(dmp->name, "root"); + + memset(spec, 0, sizeof (*spec)); + spec->sector_start = 0; + spec->length = size; + strcpy(spec->target_type, "crypt"); + + strcpy(key, CONFIG_DMCRYPTATBOOT_KEY); + + memset(target_info, 0, 128); + snprintf((char *)target_info, 128, "%s %s 0 /dev/tomap 0", + CONFIG_DMCRYPTATBOOT_CIPHER, key); + target_info[127] = 0; + + ret = dm_ctl_ioctl(NULL, DM_TABLE_LOAD, (ulong)data); + if (ret < 0) { + printk("dm_ctl_ioctl table load failed\n"); + goto end; + } + + /* resume device */ + memset(&dm, 0, sizeof (dm)); + dm.version[0] = DM_VERSION_MAJOR; + dm.version[1] = DM_VERSION_MINOR; + dm.version[2] = DM_VERSION_PATCHLEVEL; + dm.data_size = sizeof (dm); + strcpy(dm.name, "root"); + + ret = dm_ctl_ioctl(NULL, DM_DEV_SUSPEND, (ulong)&dm); + if (ret < 0) { + printk("dm_ctl_ioctl resume failed\n"); + goto end; + } + + strcpy(saved_root_name, "/dev/dm-0"); +end: + return ret; +} +#endif + /* * Prepare the namespace - decide what/where to mount, load ramdisks, etc. */ @@ -520,6 +639,16 @@ md_run_setup(); +#ifdef CONFIG_DMCRYPTATBOOT +#ifdef CONFIG_DMCRYPTATBOOT_ONLY + if (dm_run_setup() != 0) + /* disallow other root= value */ + saved_root_name[0] = 0; +#else + dm_run_setup(); +#endif +#endif + if (saved_root_name[0]) { root_device_name = saved_root_name; if (!strncmp(root_device_name, "mtd", 3) || diff -ruw linux-3.2.13/init/Kconfig linux-3.2.13-fbx/init/Kconfig --- linux-3.2.13/init/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/init/Kconfig 2013-06-13 15:06:42.990517021 +0200 @@ -565,6 +565,41 @@ 13 => 8 KB 12 => 4 KB + +config DMCRYPTATBOOT + bool "Create device-mapper crypt target before root" + depends on DM_CRYPT + default n + +config DMCRYPTATBOOT_DEVICE + string "Device major:minor" + depends on DMCRYPTATBOOT + +config DMCRYPTATBOOT_CIPHER + string "Cipher" + depends on DMCRYPTATBOOT + +config DMCRYPTATBOOT_KEY + string "Key" + depends on DMCRYPTATBOOT + +config DMCRYPTATBOOT_KEY_DECRYPT + string "Decryption key" + depends on DMCRYPTATBOOT + +config DMCRYPTATBOOT_ONLY + bool "Refuse to mount something else" + depends on DMCRYPTATBOOT + +config FBX_DECRYPT_INITRD + bool "Decrypt initrd at boot" + depends on BLK_DEV_RAM + default n + +config FBX_DECRYPT_INITRD_KEY + string "Decryption key" + depends on FBX_DECRYPT_INITRD + # # Architectures with an unreliable sched_clock() should select this: # @@ -930,7 +965,6 @@ menuconfig EXPERT bool "Configure standard kernel features (expert users)" # Unhide debug options, to make the on-by-default options visible - select DEBUG_KERNEL help This option allows certain base kernel options and settings to be disabled or tweaked. This is for specialized diff -ruw linux-3.2.13/init/Makefile linux-3.2.13-fbx/init/Makefile --- linux-3.2.13/init/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/init/Makefile 2013-06-13 15:06:42.990517021 +0200 @@ -10,11 +10,17 @@ endif obj-$(CONFIG_GENERIC_CALIBRATE_DELAY) += calibrate.o +obj-$(CONFIG_FBX_DECRYPT_INITRD)+= fbx_decrypt_initrd.o rc4.o + mounts-y := do_mounts.o mounts-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o mounts-$(CONFIG_BLK_DEV_INITRD) += do_mounts_initrd.o mounts-$(CONFIG_BLK_DEV_MD) += do_mounts_md.o + +# files to be removed upon make clean +clean-files := ../include/linux/compile.h dmcryptatboot_decrypt.c + # dependencies on generated files need to be listed explicitly $(obj)/version.o: include/generated/compile.h diff -ruw linux-3.2.13/kernel/fork.c linux-3.2.13-fbx/kernel/fork.c --- linux-3.2.13/kernel/fork.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/fork.c 2013-06-13 15:06:43.002517017 +0200 @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -167,6 +168,7 @@ free_thread_info(tsk->stack); rt_mutex_debug_task_free(tsk); ftrace_graph_exit_task(tsk); + put_seccomp_filter(tsk); free_task_struct(tsk); } EXPORT_SYMBOL(free_task); @@ -1092,6 +1094,7 @@ goto fork_out; ftrace_graph_init_task(p); + get_seccomp_filter(p); rt_mutex_init_task(p); diff -ruw linux-3.2.13/kernel/nsproxy.c linux-3.2.13-fbx/kernel/nsproxy.c --- linux-3.2.13/kernel/nsproxy.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/nsproxy.c 2013-06-13 15:06:43.010517012 +0200 @@ -191,7 +191,13 @@ CLONE_NEWNET))) return 0; - if (!capable(CAP_SYS_ADMIN)) + /* We require either no_new_privs or CAP_SYS_ADMIN for all modes */ + if (!current->no_new_privs && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + /* NEWNS and NEWNET always require CAP_SYS_ADMIN. */ + if ((unshare_flags & (CLONE_NEWNS | CLONE_NEWNET)) && + !capable(CAP_SYS_ADMIN)) return -EPERM; *new_nsp = create_new_namespaces(unshare_flags, current, diff -ruw linux-3.2.13/kernel/pid.c linux-3.2.13-fbx/kernel/pid.c --- linux-3.2.13/kernel/pid.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/pid.c 2013-06-13 15:06:43.014517009 +0200 @@ -79,7 +79,7 @@ .level = 0, .child_reaper = &init_task, }; -EXPORT_SYMBOL_GPL(init_pid_ns); +EXPORT_SYMBOL(init_pid_ns); int is_container_init(struct task_struct *tsk) { diff -ruw linux-3.2.13/kernel/printk.c linux-3.2.13-fbx/kernel/printk.c --- linux-3.2.13/kernel/printk.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/printk.c 2013-06-13 15:06:43.014517009 +0200 @@ -53,6 +53,10 @@ #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT) +#ifdef CONFIG_DEBUG_LL +extern void printascii(char *); +#endif + /* printk's without a loglevel use this.. */ #define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL @@ -329,6 +333,29 @@ return 0; } +/* + * dump log buffer content in given buffer + */ +void console_emergency_dump(char *buf, int *len) +{ + int i, limit; + + if (*len > log_buf_len) + *len = log_buf_len; + if (*len > logged_chars) + *len = logged_chars; + limit = log_end; + + for (i = 0; i < *len; i++) { + int j; + + j = limit - 1 -i; + if (j + log_buf_len < log_end) + break; + buf[*len - 1 - i] = LOG_BUF(j); + } +} + int do_syslog(int type, char __user *buf, int len, bool from_file) { unsigned i, j, limit, count; @@ -876,6 +903,10 @@ printed_len += vscnprintf(printk_buf + printed_len, sizeof(printk_buf) - printed_len, fmt, args); +#ifdef CONFIG_DEBUG_LL + printascii(printk_buf); +#endif + p = printk_buf; /* Read log level and handle special printk prefix */ diff -ruw linux-3.2.13/kernel/ptrace.c linux-3.2.13-fbx/kernel/ptrace.c --- linux-3.2.13/kernel/ptrace.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/ptrace.c 2013-06-13 15:06:43.014517009 +0200 @@ -543,6 +543,9 @@ if (data & PTRACE_O_TRACEEXIT) child->ptrace |= PT_TRACE_EXIT; + if (data & PTRACE_O_TRACESECCOMP) + child->ptrace |= PT_TRACE_SECCOMP; + return (data & ~PTRACE_O_MASK) ? -EINVAL : 0; } diff -ruw linux-3.2.13/kernel/signal.c linux-3.2.13-fbx/kernel/signal.c --- linux-3.2.13/kernel/signal.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/signal.c 2013-06-13 15:06:43.026517005 +0200 @@ -159,7 +159,7 @@ #define SYNCHRONOUS_MASK \ (sigmask(SIGSEGV) | sigmask(SIGBUS) | sigmask(SIGILL) | \ - sigmask(SIGTRAP) | sigmask(SIGFPE)) + sigmask(SIGTRAP) | sigmask(SIGFPE) | sigmask(SIGSYS)) int next_signal(struct sigpending *pending, sigset_t *mask) { @@ -2620,6 +2620,13 @@ err |= __put_user(from->si_uid, &to->si_uid); err |= __put_user(from->si_ptr, &to->si_ptr); break; +#ifdef __ARCH_SIGSYS + case __SI_SYS: + err |= __put_user(from->si_call_addr, &to->si_call_addr); + err |= __put_user(from->si_syscall, &to->si_syscall); + err |= __put_user(from->si_arch, &to->si_arch); + break; +#endif default: /* this is just in case for now ... */ err |= __put_user(from->si_pid, &to->si_pid); err |= __put_user(from->si_uid, &to->si_uid); diff -ruw linux-3.2.13/kernel/sys.c linux-3.2.13-fbx/kernel/sys.c --- linux-3.2.13/kernel/sys.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/sys.c 2013-06-13 15:06:43.026517005 +0200 @@ -1781,7 +1781,7 @@ error = prctl_get_seccomp(); break; case PR_SET_SECCOMP: - error = prctl_set_seccomp(arg2); + error = prctl_set_seccomp(arg2, (char __user *)arg3); break; case PR_GET_TSC: error = GET_TSC_CTL(arg2); @@ -1841,6 +1841,16 @@ else error = PR_MCE_KILL_DEFAULT; break; + case PR_SET_NO_NEW_PRIVS: + if (arg2 != 1 || arg3 || arg4 || arg5) + return -EINVAL; + + current->no_new_privs = 1; + break; + case PR_GET_NO_NEW_PRIVS: + if (arg2 || arg3 || arg4 || arg5) + return -EINVAL; + return current->no_new_privs ? 1 : 0; default: error = -EINVAL; break; diff -ruw linux-3.2.13/kernel/sysctl.c linux-3.2.13-fbx/kernel/sysctl.c --- linux-3.2.13/kernel/sysctl.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/kernel/sysctl.c 2013-06-13 15:06:43.026517005 +0200 @@ -192,6 +192,21 @@ #endif +/* Return standard mode bits for table entry. */ +static int sysctl_permissions(struct ctl_table_root *root, + struct nsproxy *nsproxy, + struct ctl_table *table) +{ + /* Allow system administrator to have same access as root. */ + if (capable(CAP_SYS_ADMIN)) { + int mode = (table->mode >> 6) & 7; + return (mode << 6) | (mode << 3) | mode; + } + + /* read-only otherwise */ + return table->mode & ~0222; +} + static struct ctl_table root_table[]; static struct ctl_table_root sysctl_table_root; static struct ctl_table_header root_table_header = { @@ -204,6 +219,7 @@ static struct ctl_table_root sysctl_table_root = { .root_list = LIST_HEAD_INIT(sysctl_table_root.root_list), .default_set.list = LIST_HEAD_INIT(root_table_header.ctl_entry), + .permissions = sysctl_permissions, }; static struct ctl_table kern_table[]; diff -ruw linux-3.2.13/lib/Kconfig linux-3.2.13-fbx/lib/Kconfig --- linux-3.2.13/lib/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/lib/Kconfig 2013-06-13 15:06:43.038516999 +0200 @@ -276,4 +276,7 @@ so its calculations are in fixed point. Modules can select this when they require this function. Module will be called cordic. +config FBXSERIAL + bool + endmenu diff -ruw linux-3.2.13/lib/Makefile linux-3.2.13-fbx/lib/Makefile --- linux-3.2.13/lib/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/lib/Makefile 2013-06-13 15:06:43.042516996 +0200 @@ -86,6 +86,8 @@ obj-$(CONFIG_SMP) += percpu_counter.o obj-$(CONFIG_AUDIT_GENERIC) += audit.o +obj-$(CONFIG_FBXSERIAL) += fbxserial.o + obj-$(CONFIG_SWIOTLB) += swiotlb.o obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o diff -ruw linux-3.2.13/net/8021q/vlan.c linux-3.2.13-fbx/net/8021q/vlan.c --- linux-3.2.13/net/8021q/vlan.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/8021q/vlan.c 2013-06-13 15:06:43.074516981 +0200 @@ -226,7 +226,7 @@ /* Attach a VLAN device to a mac address (ie Ethernet Card). * Returns 0 if the device was created or a negative error code otherwise. */ -static int register_vlan_device(struct net_device *real_dev, u16 vlan_id) +int register_vlan_device(struct net_device *real_dev, u16 vlan_id) { struct net_device *new_dev; struct net *net = dev_net(real_dev); diff -ruw linux-3.2.13/net/8021q/vlan_core.c linux-3.2.13-fbx/net/8021q/vlan_core.c --- linux-3.2.13/net/8021q/vlan_core.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/8021q/vlan_core.c 2013-06-13 15:06:43.074516981 +0200 @@ -53,6 +53,7 @@ } skb->priority = vlan_get_ingress_priority(vlan_dev, skb->vlan_tci); + skb->rx_class = skb->priority; skb->vlan_tci = 0; rx_stats = this_cpu_ptr(vlan_dev_info(vlan_dev)->vlan_pcpu_stats); diff -ruw linux-3.2.13/net/core/dev.c linux-3.2.13-fbx/net/core/dev.c --- linux-3.2.13/net/core/dev.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/core/dev.c 2013-06-13 15:06:43.114516962 +0200 @@ -137,6 +137,7 @@ #include #include #include +#include #include "net-sysfs.h" @@ -181,6 +182,19 @@ static struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly; static struct list_head ptype_all __read_mostly; /* Taps */ +#ifdef CONFIG_NETRXTHREAD + +#define RXTHREAD_MAX_PROCESS CONFIG_NETRXTHREAD_MAX_PROCESS +#define RXTHREAD_MAX_PKTS 128 + +static struct task_struct *krxd; +static struct sk_buff_head krxd_pkt_queue[CONFIG_NETRXTHREAD_RX_QUEUE]; +static unsigned int krxd_stats_pkts[CONFIG_NETRXTHREAD_RX_QUEUE]; +static unsigned int krxd_stats_dropped[CONFIG_NETRXTHREAD_RX_QUEUE]; +static wait_queue_head_t krxd_wq; +static unsigned int krxd_pkts_count; +#endif + /* * The @dev_base_head list is protected by @dev_base_lock and the rtnl * semaphore. @@ -2975,6 +2989,23 @@ return NET_RX_DROP; } +/* Start Freebox added code */ +#if defined(CONFIG_FREEBOX_DIVERTER) || defined(CONFIG_FREEBOX_DIVERTER_MODULE) +int (*fbxdiverter_hook)(struct sk_buff *); + +static int handle_fbxdiverter(struct sk_buff *skb) +{ + /* try_module_get is missing here, so there is a race on + * fbxdiverter module deletion */ + if (!fbxdiverter_hook) + return 0; + return fbxdiverter_hook(skb); +} + +EXPORT_SYMBOL(fbxdiverter_hook); +#endif + + /** * netif_rx - post buffer to the network code * @skb: buffer to post @@ -3110,6 +3141,36 @@ EXPORT_SYMBOL_GPL(br_fdb_test_addr_hook); #endif +#if defined(CONFIG_FBXBRIDGE) || defined(CONFIG_FBXBRIDGE_MODULE) +struct sk_buff *(*fbxbridge_handle_frame_hook)(struct fbxbridge *p, struct sk_buff *skb); + +struct fbxbridge; + +static inline struct sk_buff *handle_fbxbridge(struct sk_buff *skb, + struct packet_type **pt_prev, int *ret, + struct net_device *orig_dev) +{ + struct fbxbridge *fbxbr; + + if (skb->pkt_type == PACKET_LOOPBACK || + (fbxbr = skb->dev->fbx_bridge_port) == NULL) + return skb; + + if (skb->protocol != __constant_htons(ETH_P_IP) && + skb->protocol != __constant_htons(ETH_P_ARP)) + return skb; + + if (*pt_prev) { + *ret = deliver_skb(skb, *pt_prev, orig_dev); + *pt_prev = NULL; + } + + return fbxbridge_handle_frame_hook(fbxbr, skb); +} +#else +#define handle_fbxbridge(skb, pt_prev, ret, orig_dev) (skb) +#endif + #ifdef CONFIG_NET_CLS_ACT /* TODO: Maybe we should just force sch_ingress to be compiled in * when CONFIG_NET_CLS_ACT is? otherwise some useless instructions @@ -3221,7 +3282,9 @@ } EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister); -static int __netif_receive_skb(struct sk_buff *skb) +static int __netif_receive_skb(struct sk_buff *skb); + +static int __netif_receive_skb_end(struct sk_buff *skb) { struct packet_type *ptype, *pt_prev; rx_handler_func_t *rx_handler; @@ -3231,23 +3294,6 @@ int ret = NET_RX_DROP; __be16 type; - if (!netdev_tstamp_prequeue) - net_timestamp_check(skb); - - trace_netif_receive_skb(skb); - - /* if we've gotten here through NAPI, check netpoll */ - if (netpoll_receive_skb(skb)) - return NET_RX_DROP; - - if (!skb->skb_iif) - skb->skb_iif = skb->dev->ifindex; - orig_dev = skb->dev; - - skb_reset_network_header(skb); - skb_reset_transport_header(skb); - skb_reset_mac_len(skb); - pt_prev = NULL; rcu_read_lock(); @@ -3269,6 +3315,8 @@ } #endif + orig_dev = skb->dev; + list_for_each_entry_rcu(ptype, &ptype_all, list) { if (!ptype->dev || ptype->dev == skb->dev) { if (pt_prev) @@ -3277,6 +3325,10 @@ } } + skb = handle_fbxbridge(skb, &pt_prev, &ret, orig_dev); + if (!skb) + goto out; + #ifdef CONFIG_NET_CLS_ACT skb = handle_ing(skb, &pt_prev, &ret, orig_dev); if (!skb) @@ -3346,6 +3398,187 @@ return ret; } +#ifdef CONFIG_NETRXTHREAD + + +static int krxd_action(void *unused) +{ + struct sk_buff *skb; + unsigned int maxpkt_in_loop; + + set_user_nice(current, -5); + current->flags |= PF_NOFREEZE; + __set_current_state(TASK_RUNNING); + + maxpkt_in_loop = RXTHREAD_MAX_PROCESS; + while (1) { + unsigned int i, queue, count; + + local_bh_disable(); + count = CONFIG_NETRXTHREAD_RX_QUEUE; + for (i = 0; i < count; i++) { + queue = count - i - 1; + skb = skb_dequeue(&krxd_pkt_queue[queue]); + if (!skb) + continue; + krxd_pkts_count--; + break; + } + + if (!skb) { + local_bh_enable(); + wait_event_interruptible(krxd_wq, + krxd_pkts_count != 0); + set_current_state(TASK_RUNNING); + maxpkt_in_loop = RXTHREAD_MAX_PROCESS; + continue; + } + + __netif_receive_skb_end(skb); + local_bh_enable(); + + /* only schedule when working on lowest prio queue */ + if (queue == 0) { + if (--maxpkt_in_loop == 0) { + maxpkt_in_loop = RXTHREAD_MAX_PROCESS; + schedule(); + } + } + } + return 0; +} + +#ifdef CONFIG_PROC_FS +/* + * This is invoked by the /proc filesystem handler to display a device + * in detail. + */ +void *krxthread_seq_start(struct seq_file *seq, loff_t *pos) +{ + int *queue; + + if (*pos > CONFIG_NETRXTHREAD_RX_QUEUE) + return NULL; + + queue = kmalloc(sizeof(*queue), GFP_KERNEL); + if (!queue) + return NULL; + *queue = ((int)*pos - 1); + + return queue; +} + +void *krxthread_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + int *queue = v; + + if (*pos == CONFIG_NETRXTHREAD_RX_QUEUE) + return NULL; + + ++*queue; + *pos = *queue + 1; + return queue; +} + +void krxthread_seq_stop(struct seq_file *seq, void *v) +{ + kfree(v); +} + +static void krxthread_seq_printf_stats(struct seq_file *seq, int queue) +{ + seq_printf(seq, "%8u %12u %12u\n", + queue, + krxd_stats_pkts[queue], + krxd_stats_dropped[queue]); +} + +static int krxthread_seq_show(struct seq_file *seq, void *v) +{ + int *queue = v; + + if (*queue == -1) + seq_printf(seq, "%8s %12s %12s\n", + "queue", "packets", "drops"); + else + krxthread_seq_printf_stats(seq, *queue); + return 0; +} + +static const struct seq_operations krxthread_seq_ops = { + .start = krxthread_seq_start, + .next = krxthread_seq_next, + .stop = krxthread_seq_stop, + .show = krxthread_seq_show, +}; + +static int krxthread_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &krxthread_seq_ops); +} + +static const struct file_operations krxthread_seq_fops = { + .owner = THIS_MODULE, + .open = krxthread_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +#endif /* PROCFS */ +#endif /* RXTHREAD */ + +static int __netif_receive_skb(struct sk_buff *skb) +{ +#ifdef CONFIG_NETRXTHREAD + unsigned int len, queue; +#endif + + if (!netdev_tstamp_prequeue) + net_timestamp_check(skb); + + trace_netif_receive_skb(skb); + + /* if we've gotten here through NAPI, check netpoll */ + if (netpoll_receive_skb(skb)) + return NET_RX_DROP; + + if (!skb->skb_iif) + skb->skb_iif = skb->dev->ifindex; + + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + skb_reset_mac_len(skb); + +#if defined(CONFIG_FREEBOX_DIVERTER) || defined(CONFIG_FREEBOX_DIVERTER_MODULE) + if (handle_fbxdiverter(skb)) + return NET_RX_SUCCESS; +#endif + +#ifndef CONFIG_NETRXTHREAD + return __netif_receive_skb_end(skb); +#else + queue = skb->rx_class; + if (queue >= CONFIG_NETRXTHREAD_RX_QUEUE) + queue = CONFIG_NETRXTHREAD_RX_QUEUE - 1; + + /* queue the packet to the rx thread */ + local_bh_disable(); + len = skb_queue_len(&krxd_pkt_queue[queue]); + if (len < RXTHREAD_MAX_PKTS) { + __skb_queue_tail(&krxd_pkt_queue[queue], skb); + krxd_pkts_count++; + krxd_stats_pkts[queue]++; + if (!len) + wake_up(&krxd_wq); + } else { + krxd_stats_dropped[queue]++; + dev_kfree_skb(skb); + } + local_bh_enable(); + return NET_RX_SUCCESS; +#endif +} + /** * netif_receive_skb - process receive buffer from network * @skb: buffer to process @@ -4438,7 +4671,11 @@ goto out_dev; if (!proc_net_fops_create(net, "ptype", S_IRUGO, &ptype_seq_fops)) goto out_softnet; - +#ifdef CONFIG_NETRXTHREAD + if (!proc_net_fops_create(net, "krxthread", S_IRUGO, + &krxthread_seq_fops)) + goto out; +#endif if (wext_proc_init(net)) goto out_ptype; rc = 0; @@ -5826,7 +6063,7 @@ rebroadcast_time = jiffies; } - msleep(250); + msleep(1); refcnt = netdev_refcnt_read(dev); @@ -6676,6 +6913,19 @@ open_softirq(NET_TX_SOFTIRQ, net_tx_action); open_softirq(NET_RX_SOFTIRQ, net_rx_action); +#ifdef CONFIG_NETRXTHREAD + for (i = 0; i < CONFIG_NETRXTHREAD_RX_QUEUE; i++) + skb_queue_head_init(&krxd_pkt_queue[i]); + krxd_pkts_count = 0; + init_waitqueue_head(&krxd_wq); + krxd = kthread_create(krxd_action, NULL, "krxthread"); + if (IS_ERR(krxd)) { + printk(KERN_ERR "unable to create krxd\n"); + return -ENOMEM; + } + wake_up_process(krxd); +#endif + hotcpu_notifier(dev_cpu_callback, 0); dst_init(); dev_mcast_init(); @@ -6694,3 +6944,6 @@ late_initcall_sync(initialize_hashrnd); +#if defined(CONFIG_FBXBRIDGE_MODULE) +EXPORT_SYMBOL(fbxbridge_handle_frame_hook); +#endif diff -ruw linux-3.2.13/net/core/filter.c linux-3.2.13-fbx/net/core/filter.c --- linux-3.2.13/net/core/filter.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/core/filter.c 2013-06-13 15:06:43.114516962 +0200 @@ -350,6 +350,11 @@ A = 0; continue; } +#ifdef CONFIG_SECCOMP_FILTER + case BPF_S_ANC_SECCOMP_LD_W: + A = seccomp_bpf_load(fentry->k); + continue; +#endif default: WARN_RATELIMIT(1, "Unknown code:%u jt:%u tf:%u k:%u\n", fentry->code, fentry->jt, diff -ruw linux-3.2.13/net/core/skbuff.c linux-3.2.13-fbx/net/core/skbuff.c --- linux-3.2.13/net/core/skbuff.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/core/skbuff.c 2013-06-13 15:06:43.122516957 +0200 @@ -556,7 +556,11 @@ #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE) new->ipvs_property = old->ipvs_property; #endif +#ifdef CONFIG_IP_FFN + new->ffn_state = FFN_STATE_INIT; +#endif new->protocol = old->protocol; + new->rx_class = old->rx_class; new->mark = old->mark; new->skb_iif = old->skb_iif; __nf_copy(new, old); diff -ruw linux-3.2.13/net/ipv4/ipconfig.c linux-3.2.13-fbx/net/ipv4/ipconfig.c --- linux-3.2.13/net/ipv4/ipconfig.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/ipconfig.c 2013-06-13 15:06:43.146516946 +0200 @@ -189,15 +189,61 @@ static struct ic_device *ic_first_dev __initdata = NULL;/* List of open device */ static struct net_device *ic_dev __initdata = NULL; /* Selected device */ -static bool __init ic_is_init_dev(struct net_device *dev) +static bool __init ic_is_init_dev(struct net_device *dev, bool partial) { + char *p = NULL; + bool ret; + if (dev->flags & IFF_LOOPBACK) return false; - return user_dev_name[0] ? !strcmp(dev->name, user_dev_name) : + + if (partial) { + p = strchr(user_dev_name, '.'); + if (p) + *p = 0; + } + + ret = false; + if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) : (!(dev->flags & IFF_LOOPBACK) && (dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) && - strncmp(dev->name, "dummy", 5)); + strncmp(dev->name, "dummy", 5))) + ret = true; + if (p) + *p = '.'; + return ret; +} + +#ifdef CONFIG_VLAN_8021Q +int register_vlan_device(struct net_device *real_dev, u16 vlan_id); + +static void __init prepare_vlan(void) +{ + unsigned short oflags; + struct net_device *dev; + char *p; + u16 vid; + + if (!strchr(user_dev_name, '.')) + return; + + p = strchr(user_dev_name, '.'); + *p = 0; + vid = simple_strtoul(p + 1, NULL, 10); + dev = __dev_get_by_name(&init_net, user_dev_name); + if (!dev) + goto fail; + + oflags = dev->flags; + if (dev_change_flags(dev, oflags | IFF_UP) < 0) + goto fail; + + register_vlan_device(dev, vid); + +fail: + *p = '.'; } +#endif static int __init ic_open_devs(void) { @@ -217,8 +263,13 @@ printk(KERN_ERR "IP-Config: Failed to open %s\n", dev->name); } +#ifdef CONFIG_VLAN_8021Q + /* register vlan device if needed */ + prepare_vlan(); +#endif + for_each_netdev(&init_net, dev) { - if (ic_is_init_dev(dev)) { + if (ic_is_init_dev(dev, false)) { int able = 0; if (dev->mtu >= 364) able |= IC_BOOTP; @@ -261,7 +312,7 @@ start = jiffies; while (jiffies - start < msecs_to_jiffies(CONF_CARRIER_TIMEOUT)) { for_each_netdev(&init_net, dev) - if (ic_is_init_dev(dev) && netif_carrier_ok(dev)) + if (ic_is_init_dev(dev, false) && netif_carrier_ok(dev)) goto have_carrier; msleep(1); @@ -688,8 +739,10 @@ e += len; } if (*vendor_class_identifier) { +#ifdef IPCONFIG_DEBUG printk(KERN_INFO "DHCP: sending class identifier \"%s\"\n", vendor_class_identifier); +#endif *e++ = 60; /* Class-identifier */ len = strlen(vendor_class_identifier); *e++ = len; @@ -1348,7 +1401,7 @@ rtnl_lock(); for_each_netdev(&init_net, dev) { - if (ic_is_init_dev(dev)) { + if (ic_is_init_dev(dev, true)) { found = 1; break; } diff -ruw linux-3.2.13/net/ipv4/ip_input.c linux-3.2.13-fbx/net/ipv4/ip_input.c --- linux-3.2.13/net/ipv4/ip_input.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/ip_input.c 2013-06-13 15:06:43.142516949 +0200 @@ -185,10 +185,15 @@ return 0; } -static int ip_local_deliver_finish(struct sk_buff *skb) +int ip_local_deliver_finish(struct sk_buff *skb) { struct net *net = dev_net(skb->dev); +#ifdef CONFIG_IP_FFN + if (skb->ffn_state == FFN_STATE_FORWARDABLE) + ip_ffn_add(skb, IP_FFN_LOCAL_IN); +#endif + __skb_pull(skb, ip_hdrlen(skb)); /* Point into the IP datagram, just past the header. */ @@ -434,6 +439,11 @@ goto drop; } +#ifdef CONFIG_IP_FFN + if (!ip_ffn_process(skb)) + return NET_RX_SUCCESS; +#endif + /* Remove any debris in the socket control block */ memset(IPCB(skb), 0, sizeof(struct inet_skb_parm)); diff -ruw linux-3.2.13/net/ipv4/ip_output.c linux-3.2.13-fbx/net/ipv4/ip_output.c --- linux-3.2.13/net/ipv4/ip_output.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/ip_output.c 2013-06-13 15:06:43.142516949 +0200 @@ -205,6 +205,11 @@ skb = skb2; } +#ifdef CONFIG_IP_FFN + if (skb->ffn_state == FFN_STATE_FORWARDABLE) + ip_ffn_add(skb, IP_FFN_FINISH_OUT); +#endif + rcu_read_lock(); neigh = dst_get_neighbour(dst); if (neigh) { @@ -314,6 +319,11 @@ skb->dev = dev; skb->protocol = htons(ETH_P_IP); +#ifdef CONFIG_IP_FFN + if (skb->ffn_state == FFN_STATE_FAST_FORWARDED) + return ip_finish_output(skb); +#endif + return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING, skb, NULL, dev, ip_finish_output, !(IPCB(skb)->flags & IPSKB_REROUTED)); @@ -1534,4 +1544,7 @@ #if defined(CONFIG_IP_MULTICAST) && defined(CONFIG_PROC_FS) igmp_mc_proc_init(); #endif +#ifdef CONFIG_IP_FFN + ip_ffn_init(); +#endif } diff -ruw linux-3.2.13/net/ipv4/Kconfig linux-3.2.13-fbx/net/ipv4/Kconfig --- linux-3.2.13/net/ipv4/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/Kconfig 2013-06-13 15:06:43.138516952 +0200 @@ -312,6 +312,11 @@ If unsure, say N. +config INET_XFRM_GC_THRESH + int "IP: xfrm garbage collect threshold" + depends on XFRM + default 1024 + config INET_AH tristate "IP: AH transformation" select XFRM diff -ruw linux-3.2.13/net/ipv4/Makefile linux-3.2.13-fbx/net/ipv4/Makefile --- linux-3.2.13/net/ipv4/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/Makefile 2013-06-13 15:06:43.138516952 +0200 @@ -14,6 +14,8 @@ inet_fragment.o ping.o obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o + +obj-$(CONFIG_IP_FFN) += ip_ffn.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_IP_MULTIPLE_TABLES) += fib_rules.o obj-$(CONFIG_IP_MROUTE) += ipmr.o diff -ruw linux-3.2.13/net/ipv4/netfilter/ip_tables.c linux-3.2.13-fbx/net/ipv4/netfilter/ip_tables.c --- linux-3.2.13/net/ipv4/netfilter/ip_tables.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/netfilter/ip_tables.c 2013-06-13 15:06:43.146516946 +0200 @@ -1281,6 +1281,10 @@ tmp.num_counters, tmp.counters); if (ret) goto free_newinfo_untrans; + +#ifdef CONFIG_IP_FFN + ip_ffn_flush_all(); +#endif return 0; free_newinfo_untrans: diff -ruw linux-3.2.13/net/ipv4/netfilter/Kconfig linux-3.2.13-fbx/net/ipv4/netfilter/Kconfig --- linux-3.2.13/net/ipv4/netfilter/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/netfilter/Kconfig 2013-06-13 15:06:43.146516946 +0200 @@ -5,6 +5,13 @@ menu "IP: Netfilter Configuration" depends on INET && NETFILTER +config IP_FFN + bool "IP: Fast forwarding and NAT" + +config IP_FFN_PROCFS + bool "IP: Fast forwarding and NAT /proc/net entries" + depends on IP_FFN + config NF_DEFRAG_IPV4 tristate default n diff -ruw linux-3.2.13/net/ipv4/xfrm4_policy.c linux-3.2.13-fbx/net/ipv4/xfrm4_policy.c --- linux-3.2.13/net/ipv4/xfrm4_policy.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv4/xfrm4_policy.c 2013-06-13 15:06:43.166516938 +0200 @@ -236,7 +236,7 @@ .destroy = xfrm4_dst_destroy, .ifdown = xfrm4_dst_ifdown, .local_out = __ip_local_out, - .gc_thresh = 1024, + .gc_thresh = CONFIG_INET_XFRM_GC_THRESH, }; static struct xfrm_policy_afinfo xfrm4_policy_afinfo = { diff -ruw linux-3.2.13/net/ipv6/Kconfig linux-3.2.13-fbx/net/ipv6/Kconfig --- linux-3.2.13/net/ipv6/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/ipv6/Kconfig 2013-06-13 15:06:43.166516938 +0200 @@ -192,6 +192,11 @@ config IPV6_NDISC_NODETYPE bool +config IPV6_SIT_FBX6TO4 + bool "sit support Freebox 6to4 scheme" + depends on IPV6_SIT + default n + config IPV6_TUNNEL tristate "IPv6: IP-in-IPv6 tunnel (RFC2473)" select INET6_TUNNEL diff -ruw linux-3.2.13/net/Kconfig linux-3.2.13-fbx/net/Kconfig --- linux-3.2.13/net/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/Kconfig 2013-06-13 15:06:43.078516980 +0200 @@ -45,6 +45,23 @@ menu "Networking options" +config NETSKBPAD + int "Size reserved by dev_alloc_skb" + default 16 + +config NETRXTHREAD + bool "Do rx network processing in kernel thread" + +config NETRXTHREAD_RX_QUEUE + int "Number of rx queues" + default 1 + depends on NETRXTHREAD + +config NETRXTHREAD_MAX_PROCESS + int "Maximum number of packet to process before schedule" + default 4 + depends on NETRXTHREAD + source "net/packet/Kconfig" source "net/unix/Kconfig" source "net/xfrm/Kconfig" @@ -197,6 +214,8 @@ source "net/tipc/Kconfig" source "net/atm/Kconfig" source "net/l2tp/Kconfig" +source "net/fbxatm/Kconfig" +source "net/fbxbridge/Kconfig" source "net/802/Kconfig" source "net/bridge/Kconfig" source "net/dsa/Kconfig" diff -ruw linux-3.2.13/net/Makefile linux-3.2.13-fbx/net/Makefile --- linux-3.2.13/net/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/Makefile 2013-06-13 15:06:43.078516980 +0200 @@ -39,6 +39,12 @@ obj-$(CONFIG_AF_RXRPC) += rxrpc/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_L2TP) += l2tp/ +ifneq ($(CONFIG_FBXATM),) +obj-y += fbxatm/ +endif +ifneq ($(CONFIG_FBXBRIDGE),) +obj-y += fbxbridge/ +endif obj-$(CONFIG_DECNET) += decnet/ obj-$(CONFIG_ECONET) += econet/ obj-$(CONFIG_PHONET) += phonet/ diff -ruw linux-3.2.13/net/netfilter/core.c linux-3.2.13-fbx/net/netfilter/core.c --- linux-3.2.13/net/netfilter/core.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/netfilter/core.c 2013-06-13 15:06:43.202516921 +0200 @@ -151,7 +151,7 @@ } return NF_ACCEPT; } - +EXPORT_SYMBOL(nf_iterate); /* Returns 1 if okfn() needs to be executed by the caller, * -EPERM for NF_DROP, 0 otherwise. */ diff -ruw linux-3.2.13/net/netfilter/nf_conntrack_core.c linux-3.2.13-fbx/net/netfilter/nf_conntrack_core.c --- linux-3.2.13/net/netfilter/nf_conntrack_core.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/netfilter/nf_conntrack_core.c 2013-06-13 15:06:43.206516919 +0200 @@ -185,6 +185,10 @@ nf_ct_remove_expectations(ct); } +#ifdef CONFIG_IP_FFN +extern void ip_ffn_ct_destroy(struct nf_conn *ct); +#endif + static void destroy_conntrack(struct nf_conntrack *nfct) { @@ -196,6 +200,10 @@ NF_CT_ASSERT(atomic_read(&nfct->use) == 0); NF_CT_ASSERT(!timer_pending(&ct->timeout)); +#ifdef CONFIG_IP_FFN + ip_ffn_ct_destroy(ct); +#endif + /* To make sure we don't get any weird locking issues here: * destroy_conntrack() MUST NOT be called with a write lock * to nf_conntrack_lock!!! -HW */ diff -ruw linux-3.2.13/net/netfilter/nf_conntrack_proto_tcp.c linux-3.2.13-fbx/net/netfilter/nf_conntrack_proto_tcp.c --- linux-3.2.13/net/netfilter/nf_conntrack_proto_tcp.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/netfilter/nf_conntrack_proto_tcp.c 2013-06-13 15:06:43.210516916 +0200 @@ -1052,6 +1052,17 @@ return NF_ACCEPT; } +#ifdef CONFIG_IP_FFN +int external_tcpv4_packet(struct nf_conn *ct, + const struct sk_buff *skb, + unsigned int dataoff, + enum ip_conntrack_info ctinfo) +{ + return tcp_packet(ct, skb, dataoff, ctinfo, AF_INET, 0); +} +#endif + + /* Called when a new connection for this protocol found. */ static bool tcp_new(struct nf_conn *ct, const struct sk_buff *skb, unsigned int dataoff) diff -ruw linux-3.2.13/net/netfilter/nf_conntrack_proto_udp.c linux-3.2.13-fbx/net/netfilter/nf_conntrack_proto_udp.c --- linux-3.2.13/net/netfilter/nf_conntrack_proto_udp.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/netfilter/nf_conntrack_proto_udp.c 2013-06-13 15:06:43.210516916 +0200 @@ -84,6 +84,16 @@ return NF_ACCEPT; } +#ifdef CONFIG_IP_FFN +int external_udpv4_packet(struct nf_conn *ct, + const struct sk_buff *skb, + unsigned int dataoff, + enum ip_conntrack_info ctinfo) +{ + return udp_packet(ct, skb, dataoff, ctinfo, AF_INET, 0); +} +#endif + /* Called when a new connection for this protocol found. */ static bool udp_new(struct nf_conn *ct, const struct sk_buff *skb, unsigned int dataoff) diff -ruw linux-3.2.13/net/netfilter/xt_owner.c linux-3.2.13-fbx/net/netfilter/xt_owner.c --- linux-3.2.13/net/netfilter/xt_owner.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/netfilter/xt_owner.c 2011-11-04 14:26:12.463894897 +0100 @@ -17,6 +17,62 @@ #include #include +static int __owner_match_simple_gid(gid_t gid, + const struct xt_owner_match_info *info) +{ + if (gid >= info->gid_min && gid <= info->gid_max) + return 1; + return 0; +} + +/* + * see kernel/groups.c:groups_to_user() function, which inspired the + * content of this function. + */ +static int __owner_match_gid_groupinfo(const struct group_info *group_info, + const struct xt_owner_match_info *info) +{ + unsigned int count = group_info->ngroups; + unsigned int block; + + for (block = 0; block < group_info->nblocks; ++block) { + unsigned int cp_count = min(NGROUPS_PER_BLOCK, count); + unsigned int i; + + for (i = 0; i < cp_count; ++i) { + if (__owner_match_simple_gid( + group_info->blocks[block][i], + info)) { + return 1; + } + count -= cp_count; + } + } + return 0; +} + +static int owner_match_gid(const struct file *filp, + const struct xt_owner_match_info *info) +{ + struct task_struct *p; + + /* + * direct match, this is the simple and only case handled by + * the old code, file fsgid matches info gid range. + */ + if (__owner_match_simple_gid(filp->f_cred->fsgid, info)) + return 1; + + /* + * otherwise we need to have a look to the group list available + * in f_cred->group_info. + */ + if (__owner_match_gid_groupinfo(filp->f_cred->group_info, info)) + return 1; + + return 0; +} + static bool owner_mt(const struct sk_buff *skb, struct xt_action_param *par) { @@ -44,8 +100,7 @@ return false; if (info->match & XT_OWNER_GID) - if ((filp->f_cred->fsgid >= info->gid_min && - filp->f_cred->fsgid <= info->gid_max) ^ + if (owner_match_gid(filp, info) ^ !(info->invert & XT_OWNER_GID)) return false; diff -ruw linux-3.2.13/net/socket.c linux-3.2.13-fbx/net/socket.c --- linux-3.2.13/net/socket.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/socket.c 2013-06-13 15:06:43.242516900 +0200 @@ -962,6 +962,31 @@ return err; } +static DEFINE_MUTEX(fbxdiverter_ioctl_mutex); +static int (*fbxdiverter_ioctl_hook) (struct net *, unsigned int cmd, void __user *arg) = NULL; + +void fbxdiverter_ioctl_set(int (*hook) (struct net *, unsigned int, + void __user *)) +{ + mutex_lock(&fbxdiverter_ioctl_mutex); + fbxdiverter_ioctl_hook = hook; + mutex_unlock(&fbxdiverter_ioctl_mutex); +} + +EXPORT_SYMBOL(fbxdiverter_ioctl_set); + +static DEFINE_MUTEX(fbxbridge_ioctl_mutex); +static int (*fbxbridge_ioctl_hook)(struct net *, unsigned int cmd, void __user *arg) = NULL; + +void fbxbridge_set(int (*hook)(struct net *, unsigned int, void __user *)) +{ + mutex_lock(&fbxbridge_ioctl_mutex); + fbxbridge_ioctl_hook = hook; + mutex_unlock(&fbxbridge_ioctl_mutex); +} + +EXPORT_SYMBOL(fbxbridge_set); + /* * With an ioctl, arg may well be a user mode pointer, but we don't know * what to do with it - that's up to the protocol still. @@ -1034,6 +1059,28 @@ err = dlci_ioctl_hook(cmd, argp); mutex_unlock(&dlci_ioctl_mutex); break; + case SIOCGFBXDIVERT: + case SIOCSFBXDIVERT: + err = -ENOPKG; + if (!fbxdiverter_ioctl_hook) + request_module("fbxdiverter"); + + mutex_lock(&fbxdiverter_ioctl_mutex); + if (fbxdiverter_ioctl_hook) + err = fbxdiverter_ioctl_hook(net, cmd, argp); + mutex_unlock(&fbxdiverter_ioctl_mutex); + break; + case SIOCGFBXBRIDGE: + case SIOCSFBXBRIDGE: + err = -ENOPKG; + if (!fbxbridge_ioctl_hook) + request_module("fbxbridge"); + + mutex_lock(&fbxbridge_ioctl_mutex); + if (fbxbridge_ioctl_hook) + err = fbxbridge_ioctl_hook(net, cmd, argp); + mutex_unlock(&fbxbridge_ioctl_mutex); + break; default: err = sock_do_ioctl(net, sock, cmd, arg); break; diff -ruw linux-3.2.13/net/sysctl_net.c linux-3.2.13-fbx/net/sysctl_net.c --- linux-3.2.13/net/sysctl_net.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/net/sysctl_net.c 2013-06-13 15:06:43.250516897 +0200 @@ -51,7 +51,9 @@ int mode = (table->mode >> 6) & 7; return (mode << 6) | (mode << 3) | mode; } - return table->mode; + + /* read-only otherwise */ + return table->mode & ~0222; } static struct ctl_table_root net_sysctl_root = { diff -ruw linux-3.2.13/security/commoncap.c linux-3.2.13-fbx/security/commoncap.c --- linux-3.2.13/security/commoncap.c 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/security/commoncap.c 2013-06-13 15:06:43.282516883 +0200 @@ -515,14 +515,17 @@ skip: /* Don't let someone trace a set[ug]id/setpcap binary with the revised - * credentials unless they have the appropriate permit + * credentials unless they have the appropriate permit. + * + * In addition, if NO_NEW_PRIVS, then ensure we get no new privs. */ if ((new->euid != old->uid || new->egid != old->gid || !cap_issubset(new->cap_permitted, old->cap_permitted)) && bprm->unsafe & ~LSM_UNSAFE_PTRACE_CAP) { /* downgrade; they get no more than they had, and maybe less */ - if (!capable(CAP_SETUID)) { + if (!capable(CAP_SETUID) || + (bprm->unsafe & LSM_UNSAFE_NO_NEW_PRIVS)) { new->euid = new->uid; new->egid = new->gid; } diff -ruw linux-3.2.13/security/Kconfig linux-3.2.13-fbx/security/Kconfig --- linux-3.2.13/security/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/security/Kconfig 2013-06-13 15:06:43.278516884 +0200 @@ -187,6 +187,7 @@ source security/smack/Kconfig source security/tomoyo/Kconfig source security/apparmor/Kconfig +source security/fbxlsmjail/Kconfig source security/integrity/Kconfig diff -ruw linux-3.2.13/security/Makefile linux-3.2.13-fbx/security/Makefile --- linux-3.2.13/security/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/security/Makefile 2013-06-13 15:06:43.278516884 +0200 @@ -7,6 +7,7 @@ subdir-$(CONFIG_SECURITY_SMACK) += smack subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo subdir-$(CONFIG_SECURITY_APPARMOR) += apparmor +subdir-$(CONFIG_SECURITY_FBXLSMJAIL) += fbxlsmjail # always enable default capabilities obj-y += commoncap.o @@ -21,6 +22,7 @@ obj-$(CONFIG_AUDIT) += lsm_audit.o obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o obj-$(CONFIG_SECURITY_APPARMOR) += apparmor/built-in.o +obj-$(CONFIG_SECURITY_FBXLSMJAIL) += fbxlsmjail/built-in.o obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o # Object integrity file lists diff -ruw linux-3.2.13/sound/soc/kirkwood/Kconfig linux-3.2.13-fbx/sound/soc/kirkwood/Kconfig --- linux-3.2.13/sound/soc/kirkwood/Kconfig 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/sound/soc/kirkwood/Kconfig 2013-06-13 15:06:43.426516813 +0200 @@ -28,3 +28,9 @@ Say Y if you want to add support for SoC audio on the HP t5325 thin client. + +config SND_KIRKWOOD_RD88F6282A + tristate "SoC Audio support for RD-88F6282-A" + depends on SND_KIRKWOOD_SOC && MACH_RD88F6282A + select SND_KIRKWOOD_SOC_I2S + select SND_SOC_CS42L51 diff -ruw linux-3.2.13/sound/soc/kirkwood/Makefile linux-3.2.13-fbx/sound/soc/kirkwood/Makefile --- linux-3.2.13/sound/soc/kirkwood/Makefile 2012-03-23 21:54:45.000000000 +0100 +++ linux-3.2.13-fbx/sound/soc/kirkwood/Makefile 2013-06-13 15:06:43.426516813 +0200 @@ -6,6 +6,9 @@ snd-soc-openrd-objs := kirkwood-openrd.o snd-soc-t5325-objs := kirkwood-t5325.o +snd-soc-rd88f6282a-objs := kirkwood-rd88f6282a.o obj-$(CONFIG_SND_KIRKWOOD_SOC_OPENRD) += snd-soc-openrd.o obj-$(CONFIG_SND_KIRKWOOD_SOC_T5325) += snd-soc-t5325.o + +obj-$(CONFIG_SND_KIRKWOOD_RD88F6282A) += snd-soc-rd88f6282a.o --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/arch/x86/kernel/fbxbootinfo.c 2011-01-06 02:17:50.582153704 +0100 @@ -0,0 +1,42 @@ +#include +#include +#include +#include + +#include + +static struct fbx_bootinfo fbx_bootinfo; + +u32 loader_bank_number; +EXPORT_SYMBOL(loader_bank_number); + +char loader_version_str[128]; +EXPORT_SYMBOL(loader_version_str); + +u32 loader_bank0_forced; +EXPORT_SYMBOL(loader_bank0_forced); + +char cefdk_version_str[256]; +EXPORT_SYMBOL(cefdk_version_str); + +void __init parse_fbxbootinfo(struct setup_data *data) +{ + if (data->len != sizeof (fbx_bootinfo)) { + printk(KERN_ERR "%s: invalid length: " + "have %i, want %i\n", __func__, data->len, + sizeof (fbx_bootinfo)); + } + memcpy(&fbx_bootinfo, data->data, data->len); + + loader_bank_number = fbx_bootinfo.bank_number; + memcpy(&loader_version_str, &fbx_bootinfo.uboot_version_str, + sizeof(loader_version_str)); + loader_bank0_forced = fbx_bootinfo.bank0_forced; + memcpy(&cefdk_version_str, &fbx_bootinfo.cefdk_version_str, + sizeof(cefdk_version_str)); +} + +const struct fbx_bootinfo *arch_get_fbxbootinfo(void) +{ + return &fbx_bootinfo; +} --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/arch/x86/kernel/fbxserial.c 2011-11-04 14:26:06.491888712 +0100 @@ -0,0 +1,51 @@ + +#include +#include +#include +#include +#include + +#include + +static struct fbx_serial serial_info; +static int parse_done; + +void __init parse_fbxserial_ext(struct setup_data *data) +{ + if (data->len != sizeof (serial_info)) { + printk(KERN_ERR "parse_fbxserial_ext: invalid length: " + "have %i, want %i\n", data->len, sizeof (serial_info)); + } + fbxserialinfo_read(data->data, &serial_info); + parse_done = 1; +} + +static int __init fbxserial_parse_check(void) +{ + if (!parse_done) { + /* + * just setup magic and crc with bogus values. + */ + u32 bad_serial[sizeof (struct fbx_serial) / sizeof (u32)] = + { 0xaa55aa55, 0xaa55aa55 }; + + /* + * feed serial info deliberately with bad data to + * enforce default settings. + */ + printk(KERN_ERR "parse_fbxserial_ext was not called. " + "please fix/update your bootloader.\n"); + fbxserialinfo_read(bad_serial, &serial_info); + } + + return 0; +} +arch_initcall(fbxserial_parse_check); + + +const struct fbx_serial *arch_get_fbxserial(void) +{ + return &serial_info; +} + +EXPORT_SYMBOL(arch_get_fbxserial); --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/arch/x86/platform/ce4100/fbx6hd.dts 2013-06-13 15:06:39.126518876 +0200 @@ -0,0 +1,458 @@ +/* + * CE4100 on Falcon Falls + * + * (c) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + */ +/dts-v1/; +/ { + model = "freebox,Freebox v6"; + compatible = "intel,falconfalls"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "intel,ce4100"; + reg = <0>; + lapic = <&lapic0>; + }; + }; + + remoti: ti,cc2530@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,remoti"; + reset-gpio = <100 0>; // gpio, polarity + + gpio@0 { + compatible = "ti,remoti-gpio"; + gpios = <200 3>; // base, number + #gpio-cells = <2>; + gpio-controller; + }; + + leds@1 { + compatible = "ti,remoti-leds"; + + rf-activity@0 { + label = "rf_activity:blue"; + }; + + rf-pairing@1 { + label = "rf_pairing:red"; + }; + }; + + hdmi-cec@2 { + compatible = "ti,remoti-cec"; + }; + }; + + soc@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,ce4100-cp"; + ranges; + + ioapic1: interrupt-controller@fec00000 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0xfec00000 0x1000>; + }; + + timer@fed00000 { + compatible = "intel,ce4100-hpet"; + reg = <0xfed00000 0x200>; + }; + + lapic0: interrupt-controller@fee00000 { + compatible = "intel,ce4100-lapic"; + reg = <0xfee00000 0x1000>; + }; + + pci@3fc { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <0 0>; + ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000 + 0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000 + 0x0000000 0 0x0 0x0 0 0x100>; + + /* Secondary IO-APIC */ + ioapic2: interrupt-controller@0,1 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0x100 0x0 0x0 0x0 0x0>; + assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>; + }; + + pci@1,0 { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <1 1>; + reg = <0x0800 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>; + + interrupt-parent = <&ioapic2>; + + display@2,0 { + compatible = "pci8086,2e5b.2", + "pci8086,2e5b", + "pciclass038000", + "pciclass0380"; + + reg = <0x11000 0x0 0x0 0x0 0x0>; + interrupts = <0 1>; + }; + + multimedia@3,0 { + compatible = "pci8086,2e5c.2", + "pci8086,2e5c", + "pciclass048000", + "pciclass0480"; + + reg = <0x11800 0x0 0x0 0x0 0x0>; + interrupts = <2 1>; + }; + + multimedia@4,0 { + compatible = "pci8086,2e5d.2", + "pci8086,2e5d", + "pciclass048000", + "pciclass0480"; + + reg = <0x12000 0x0 0x0 0x0 0x0>; + interrupts = <4 1>; + }; + + multimedia@4,1 { + compatible = "pci8086,2e5e.2", + "pci8086,2e5e", + "pciclass048000", + "pciclass0480"; + + reg = <0x12100 0x0 0x0 0x0 0x0>; + interrupts = <5 1>; + }; + + sound@6,0 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13000 0x0 0x0 0x0 0x0>; + interrupts = <6 1>; + }; + + sound@6,1 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13100 0x0 0x0 0x0 0x0>; + interrupts = <7 1>; + }; + + sound@6,2 { + compatible = "pci8086,2e60.2", + "pci8086,2e60", + "pciclass040100", + "pciclass0401"; + + reg = <0x13200 0x0 0x0 0x0 0x0>; + interrupts = <8 1>; + }; + + display@8,0 { + compatible = "pci8086,2e61.2", + "pci8086,2e61", + "pciclass038000", + "pciclass0380"; + + reg = <0x14000 0x0 0x0 0x0 0x0>; + interrupts = <9 1>; + }; + + display@8,1 { + compatible = "pci8086,2e62.2", + "pci8086,2e62", + "pciclass038000", + "pciclass0380"; + + reg = <0x14100 0x0 0x0 0x0 0x0>; + interrupts = <10 1>; + }; + + multimedia@8,2 { + compatible = "pci8086,2e63.2", + "pci8086,2e63", + "pciclass048000", + "pciclass0480"; + + reg = <0x14200 0x0 0x0 0x0 0x0>; + interrupts = <11 1>; + }; + + entertainment-encryption@9,0 { + compatible = "pci8086,2e64.2", + "pci8086,2e64", + "pciclass101000", + "pciclass1010"; + + reg = <0x14800 0x0 0x0 0x0 0x0>; + interrupts = <12 1>; + }; + + localbus@a,0 { + compatible = "pci8086,2e65.2", + "pci8086,2e65", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15000 0x0 0x0 0x0 0x0>; + }; + + serial@b,0 { + compatible = "pci8086,2e66.2", + "pci8086,2e66", + "pciclass070003", + "pciclass0700"; + + reg = <0x15800 0x0 0x0 0x0 0x0>; + interrupts = <14 1>; + }; + + gpio@b,1 { + compatible = "pci8086,2e67.2", + "pci8086,2e67", + "pciclassff0000", + "pciclassff00"; + + #gpio-cells = <2>; + reg = <0x15900 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + gpio-controller; + }; + + i2c-controller@b,2 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "pci8086,2e68.2", + "pci8086,2e68", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15a00 0x0 0x0 0x0 0x0>; + interrupts = <16 1>; + ranges = <0 0 0x02000000 0 0xdffe0500 0x100 + 1 0 0x02000000 0 0xdffe0600 0x100 + 2 0 0x02000000 0 0xdffe0700 0x100>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <0 0 0x100>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <1 0 0x100>; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <2 0 0x100>; + + pmu@60 { + #gpio-cells = <2>; + compatible = "freebox,pic16-pmu"; + reg = <0x60>; + gpio-controller; + }; + }; + }; + + smard-card@b,3 { + compatible = "pci8086,2e69.2", + "pci8086,2e69", + "pciclass070500", + "pciclass0705"; + + reg = <0x15b00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + }; + + spi-controller@b,4 { + #address-cells = <1>; + #size-cells = <0>; + compatible = + "pci8086,2e6a.2", + "pci8086,2e6a", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15c00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + + dac@0 { + compatible = "ti,pcm1755"; + reg = <0>; + spi-max-frequency = <115200>; + }; + + dac@1 { + compatible = "ti,pcm1609a"; + reg = <1>; + spi-max-frequency = <115200>; + }; + + eeprom@2 { + compatible = "atmel,at93c46"; + reg = <2>; + spi-max-frequency = <115200>; + }; + }; + + multimedia@b,7 { + compatible = "pci8086,2e6d.2", + "pci8086,2e6d", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15f00 0x0 0x0 0x0 0x0>; + }; + + ethernet@c,0 { + compatible = "pci8086,2e6e.2", + "pci8086,2e6e", + "pciclass020000", + "pciclass0200"; + + reg = <0x16000 0x0 0x0 0x0 0x0>; + interrupts = <21 1>; + }; + + clock@c,1 { + compatible = "pci8086,2e6f.2", + "pci8086,2e6f", + "pciclassff0000", + "pciclassff00"; + + reg = <0x16100 0x0 0x0 0x0 0x0>; + interrupts = <3 1>; + }; + + usb@d,0 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16800 0x0 0x0 0x0 0x0>; + interrupts = <22 1>; + }; + + usb@d,1 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16900 0x0 0x0 0x0 0x0>; + interrupts = <22 1>; + }; + + sata@e,0 { + compatible = "pci8086,2e71.0", + "pci8086,2e71", + "pciclass010601", + "pciclass0106"; + + reg = <0x17000 0x0 0x0 0x0 0x0>; + interrupts = <23 1>; + }; + + flash@f,0 { + compatible = "pci8086,701.1", + "pci8086,701", + "pciclass050100", + "pciclass0501"; + + reg = <0x17800 0x0 0x0 0x0 0x0>; + interrupts = <13 1>; + }; + + entertainment-encryption@10,0 { + compatible = "pci8086,702.1", + "pci8086,702", + "pciclass101000", + "pciclass1010"; + + reg = <0x18000 0x0 0x0 0x0 0x0>; + }; + + co-processor@11,0 { + compatible = "pci8086,703.1", + "pci8086,703", + "pciclass0b4000", + "pciclass0b40"; + + reg = <0x18800 0x0 0x0 0x0 0x0>; + interrupts = <1 1>; + }; + + multimedia@12,0 { + compatible = "pci8086,704.0", + "pci8086,704", + "pciclass048000", + "pciclass0480"; + + reg = <0x19000 0x0 0x0 0x0 0x0>; + }; + }; + + isa@1f,0 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "isa"; + reg = <0xf800 0x0 0x0 0x0 0x0>; + ranges = <1 0 0 0 0 0x100>; + + rtc@70 { + compatible = "intel,ce4100-rtc", "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; + }; + }; + }; + + crashzone@3fffe000 { + compatible = "fbx,crashzone"; + reg = <0x3fffe000 0x1000>; + }; +}; --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/arch/x86/platform/ce4100/i2c-intelce.c 2013-06-13 15:06:39.126518876 +0200 @@ -0,0 +1,320 @@ +/* + * i2c driver for Intel CE + */ + +#include +#include +#include + +#include + +#undef DEBUG + +#ifdef DEBUG +#define DPRINTF(args...) printk(args) +#else +#define DPRINTF(args...) +#endif + +#define ICR (0x00) +#define ISR (0x04) +#define ISAR (0x08) +#define IBMR (0x10) +#define IDBR (0x0C) + +#define ICR_START (1 << 0) /* start bit */ +#define ICR_STOP (1 << 1) /* stop bit */ +#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +#define ICR_TB (1 << 3) /* transfer byte bit */ +#define ICR_MA (1 << 4) /* master abort */ +#define ICR_SCLE (1 << 5) /* master clock enable */ +#define ICR_IUE (1 << 6) /* unit enable */ +#define ICR_GCD (1 << 7) /* general call disable */ +#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ +#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ +#define ICR_BEIE (1 << 10) /* enable bus error ints */ +#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ +#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ +#define ICR_SADIE (1 << 13) /* slave address detected int enable */ +#define ICR_UR (1 << 14) /* unit reset */ +#define ICR_FM (1 << 15) /* fast mode */ + +#define ISR_RWM (1 << 0) /* read/write mode */ +#define ISR_ACKNAK (1 << 1) /* ack/nak status */ +#define ISR_UB (1 << 2) /* unit busy */ +#define ISR_IBB (1 << 3) /* bus busy */ +#define ISR_SSD (1 << 4) /* slave stop detected */ +#define ISR_ALD (1 << 5) /* arbitration loss detected */ +#define ISR_ITE (1 << 6) /* tx buffer empty */ +#define ISR_IRF (1 << 7) /* rx buffer full */ +#define ISR_GCAD (1 << 8) /* general call address detected */ +#define ISR_SAD (1 << 9) /* slave address detected */ +#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ +#define ISR_RESERVED 0xfffff800 + +#define I2C_WRITE 0 +#define I2C_READ 1 + +#define I2C_BUS_ADDR (0xdffe0500) +#define I2C_BUS1_ADDR (I2C_BUS_ADDR + 0x100) +#define I2C_BUS_SIZE (0x100 - 1) + +#define PFX "CK505: " + +static void __iomem *base_addr; + +static inline u32 i2c_reg_read(u32 reg) +{ + return readl(base_addr + reg); +} + +static inline void i2c_reg_write(u32 val, u32 reg) +{ + writel(val, base_addr + reg); +} + +/* + * udelay is not working yet, so provide a dummy version + * which is sufficent for polling. + */ +static void __local_udelay(u32 delay) +{ + u16 timeout = ~0; + + while (timeout--) + asm volatile("nop"); +} + +static int i2c_hw_init(void) +{ + u32 reg = 0; + + base_addr = early_ioremap(I2C_BUS1_ADDR, I2C_BUS_SIZE); + if (!base_addr) { + printk(KERN_ERR PFX "failed to early_ioremap 0x%08x\n", I2C_BUS1_ADDR); + return -1; + } + + /* + * reset the unit and clear any pending interrupt + */ + reg |= ICR_UR; + i2c_reg_write(reg, ICR); + i2c_reg_write(0, ICR); + i2c_reg_write(0, ISR); + + /* + * TX empty and RX full interrupts are set automatically + */ + reg = ICR_IUE | ICR_SCLE | ICR_GCD; + i2c_reg_write(reg, ICR); + __local_udelay(100); + + return 0; +} + +static void i2c_clear_interrupt(void) +{ + u32 reg; + + reg = i2c_reg_read(ISR); + reg &= (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | ISR_SAD | ISR_BED); + i2c_reg_write(reg, ISR); +} + +static int i2c_wait(u32 cond, u32 *last_reg) +{ + volatile u32 reg; + int count = 100; + + while (count) { + reg = i2c_reg_read(ISR); + if (reg & cond) { + *last_reg = reg; + i2c_clear_interrupt(); + return 0; + } + count--; + __local_udelay(10); + } + + i2c_clear_interrupt(); + return -1; +} + +static int i2c_send_start(u8 addr, unsigned op) +{ + u32 reg; + int status; + + /* write slave address */ + i2c_reg_write((addr << 1) | op, IDBR); + + reg = i2c_reg_read(ICR); + reg &= ~(ICR_START | ICR_STOP | ICR_ALDIE | ICR_ACKNAK | ICR_TB); + reg |= ICR_START | ICR_TB; + i2c_reg_write(reg, ICR); + + status = i2c_wait(ISR_ITE | ISR_BED, ®); + if (status < 0) { + DPRINTF("%s: timeout\n", __func__); + return -1; + } + + if (reg & ISR_BED) { + DPRINTF("%s: bus error\n", __func__); + return -1; + } + + if (reg & ISR_ACKNAK) { + DPRINTF("%s: invalid return: %08x\n", __func__, reg); + return -2; + } + + return 0; +} + +static int i2c_tx_byte(u8 byte, unsigned stop) +{ + u32 reg; + int status; + + /* load data */ + i2c_reg_write(byte, IDBR); + + reg = i2c_reg_read(ICR); + reg &= ~(ICR_START | ICR_STOP | ICR_ALDIE | ICR_ACKNAK | ICR_TB); + reg |= ICR_ALDIE | ICR_TB; + if (stop) + reg |= ICR_STOP; + + i2c_reg_write(reg, ICR); + + status = i2c_wait(ISR_ITE, ®); + if (status < 0) { + DPRINTF("%s: timeout\n", __func__); + return -1; + } + + if (reg & ISR_BED) { + DPRINTF("%s: bus error\n", __func__); + return -1; + } + + if (reg & ISR_ACKNAK) { + DPRINTF("%s: invalid return: %08x\n", __func__, reg); + return -2; + } + + return 0; +} + +static int i2c_rx_byte(unsigned stop) +{ + u32 reg; + int status; + + reg = i2c_reg_read(ICR); + reg &= ~(ICR_START | ICR_STOP | ICR_ALDIE | ICR_ACKNAK | ICR_TB); + reg |= ICR_ALDIE | ICR_TB; + if (stop) + reg |= ICR_STOP | ICR_ACKNAK; + + i2c_reg_write(reg, ICR); + status = i2c_wait(ISR_IRF, ®); + if (status < 0) { + DPRINTF("%s: timeout\n", __func__); + return -1; + } + + if (reg & ISR_BED) { + DPRINTF("%s: bus error\n", __func__); + return -1; + } + + return i2c_reg_read(IDBR); +} + +#define CK505_ADDR (0x69) +#define CK505_SPREAD_REG (0x01) +#define CK505_SPREAD_CENTRAL (1 << 6) + +int __init sdv_i2c_fixup_ck505(void) +{ + int ret; + u8 byte; + + i2c_hw_init(); + + ret = i2c_send_start(CK505_ADDR, I2C_WRITE); + if (ret) { + printk(KERN_ERR "failed to i2c_send_start\n"); + goto out_unmap; + } + + ret = i2c_tx_byte(CK505_SPREAD_REG, 1); + if (ret) { + printk(KERN_ERR "failed to write reg\n"); + goto out_unmap; + } + + ret = i2c_send_start(CK505_ADDR, I2C_READ); + if (ret) { + printk(KERN_ERR "failed to i2c_send_start\n"); + goto out_unmap; + } + + byte = i2c_rx_byte(0); + if (byte < 0) { + printk(KERN_ERR "failed to read\n"); + goto out_unmap; + } + + byte = i2c_rx_byte(1); + if (byte < 0) { + printk(KERN_ERR "failed to read\n"); + goto out_unmap; + } + + if (byte & CK505_SPREAD_CENTRAL) { + printk(KERN_INFO PFX "no fixup required: 0x%02x\n", byte); + goto out_unmap; + } + + printk(KERN_INFO PFX "fixing up: 0x%02x -> 0x%02x\n", + byte, byte | CK505_SPREAD_CENTRAL); + + /* Set the PLL1_SSC_SEL to central spread spectrum mode */ + byte |= CK505_SPREAD_CENTRAL; + + ret = i2c_send_start(CK505_ADDR, I2C_WRITE); + if (ret) { + printk(KERN_ERR "failed to send start\n"); + goto out_unmap; + } + + ret = i2c_tx_byte(CK505_SPREAD_REG, 0); + if (ret) { + printk(KERN_ERR "failed to write byte\n"); + goto out_unmap; + } + + ret = i2c_tx_byte(CK505_SPREAD_REG, 0); + if (ret) { + printk(KERN_ERR "failed to write byte\n"); + goto out_unmap; + } + + ret = i2c_tx_byte(byte, 1); + if (ret) { + printk(KERN_ERR "failed to write byte\n"); + goto out_unmap; + } + + printk(KERN_INFO PFX "successfully fixed-up\n"); + +out_unmap: + early_iounmap(base_addr, I2C_BUS_SIZE); + + return ret; +} --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/config 2013-06-13 15:36:57.009646305 +0200 @@ -0,0 +1,2721 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/x86 3.2.13 Kernel Configuration +# +# CONFIG_64BIT is not set +CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_INSTRUCTION_DECODER=y +CONFIG_OUTPUT_FORMAT="elf32-i386" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_MMU=y +# CONFIG_ZONE_DMA is not set +# CONFIG_NEED_DMA_MAP_STATE is not set +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_GPIO=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_X86_32_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_32_LAZY_GS=y +CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" +CONFIG_KTIME_SCALAR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_HAVE_IRQ_WORK=y +CONFIG_IRQ_WORK=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="/opt/toolchains/atom32-eglibc-std-2.13-gcc-4.6.2-binutils-2.22/bin/i686-linux-" +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +CONFIG_KERNEL_XZ=y +# CONFIG_KERNEL_LZO is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_FHANDLE is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_HAVE_GENERIC_HARDIRQS=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SPARSE_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y + +# +# RCU Subsystem +# +CONFIG_TREE_PREEMPT_RCU=y +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_BOOST is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_PERF=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_BLK_CGROUP is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_SCHED_AUTOGROUP is not set +CONFIG_MM_OWNER=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_HAVE_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_JUMP_LABEL is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_PERF_EVENTS_NMI=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_BSGLIB is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# Processor type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y +CONFIG_SMP=y +CONFIG_X86_MPPARSE=y +# CONFIG_X86_BIGSMP is not set +CONFIG_X86_EXTENDED_PLATFORM=y +CONFIG_X86_INTEL_CE=y +CONFIG_FBX6HD=y +# CONFIG_X86_WANT_INTEL_MID is not set +# CONFIG_X86_RDC321X is not set +# CONFIG_X86_32_NON_STANDARD is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y +# CONFIG_X86_32_IRIS is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set +CONFIG_NO_BOOTMEM=y +# CONFIG_MEMTEST is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MELAN is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MCORE2 is not set +CONFIG_MATOM=y +# CONFIG_X86_GENERIC is not set +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 +CONFIG_X86_CMPXCHG=y +CONFIG_CMPXCHG_LOCAL=y +CONFIG_CMPXCHG_DOUBLE=y +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_XADD=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=5 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_PROCESSOR_SELECT=y +CONFIG_CPU_SUP_INTEL=y +# CONFIG_CPU_SUP_CYRIX_32 is not set +# CONFIG_CPU_SUP_AMD is not set +# CONFIG_CPU_SUP_CENTAUR is not set +# CONFIG_CPU_SUP_TRANSMETA_32 is not set +# CONFIG_CPU_SUP_UMC_32 is not set +CONFIG_HPET_TIMER=y +# CONFIG_DMI is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_NR_CPUS=2 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +# CONFIG_IRQ_TIME_ACCOUNTING is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set +CONFIG_X86_MCE=y +CONFIG_X86_MCE_INTEL=y +# CONFIG_X86_MCE_AMD is not set +# CONFIG_X86_ANCIENT_MCE is not set +CONFIG_X86_MCE_THRESHOLD=y +# CONFIG_X86_MCE_INJECT is not set +CONFIG_X86_THERMAL_VECTOR=y +# CONFIG_VM86 is not set +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +CONFIG_X86_REBOOTFIXUPS=y +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +# CONFIG_VMSPLIT_3G is not set +CONFIG_VMSPLIT_2G=y +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_X86_PAE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ILLEGAL_POINTER_VALUE=0 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_COMPACTION is not set +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +# CONFIG_MEMORY_FAILURE is not set +# CONFIG_TRANSPARENT_HUGEPAGE is not set +# CONFIG_CLEANCACHE is not set +# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set +CONFIG_X86_RESERVE_LOW=4 +# CONFIG_MATH_EMULATION is not set +CONFIG_MTRR=y +CONFIG_MTRR_SANITIZER=y +CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 +CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 +# CONFIG_X86_PAT is not set +# CONFIG_ARCH_RANDOM is not set +# CONFIG_EFI is not set +# CONFIG_SECCOMP is not set +# CONFIG_CC_STACKPROTECTOR is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +CONFIG_HZ_300=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=300 +CONFIG_SCHED_HRTICK=y +# CONFIG_KEXEC is not set +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_COMPAT_VDSO is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk=ttyS0,115200 root=/dev/nfs ip=dhcp dhcpclass=linux-fbx6hd pci=noacpi mem=672M" +CONFIG_CMDLINE_OVERRIDE=y + +# +# Power management and ACPI options +# +# CONFIG_SUSPEND is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ACPI=y +# CONFIG_ACPI_PROCFS is not set +# CONFIG_ACPI_PROCFS_POWER is not set +# CONFIG_ACPI_EC_DEBUGFS is not set +# CONFIG_ACPI_PROC_EVENT is not set +# CONFIG_ACPI_AC is not set +# CONFIG_ACPI_BATTERY is not set +# CONFIG_ACPI_BUTTON is not set +# CONFIG_ACPI_FAN is not set +# CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_PROCESSOR is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_X86_PM_TIMER=y +# CONFIG_ACPI_CONTAINER is not set +# CONFIG_ACPI_SBS is not set +# CONFIG_ACPI_HED is not set +# CONFIG_ACPI_CUSTOM_METHOD is not set +# CONFIG_ACPI_APEI is not set +# CONFIG_SFI is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_INTEL_IDLE=y + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +CONFIG_PCI_GODIRECT=y +# CONFIG_PCI_GOANY is not set +CONFIG_PCI_DIRECT=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_CNB20LE_QUIRK is not set +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_PCI_MSI=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +CONFIG_PCI_IOAPIC=y +CONFIG_PCI_LABEL=y +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set +# CONFIG_ALIX is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_RAPIDIO is not set + +# +# Executable file formats / Emulations +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_HAVE_ATOMIC_IOMAP=y +CONFIG_HAVE_TEXT_POKE_SMP=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_NETSKBPAD=16 +# CONFIG_NETRXTHREAD is not set +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_XFRM_GC_THRESH=1024 +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=y +# CONFIG_NF_CONNTRACK_MARK is not set +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set + +# +# Xtables matches +# +# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +CONFIG_NETFILTER_XT_MATCH_OWNER=y +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=y +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_FFN is not set +CONFIG_NF_DEFRAG_IPV4=y +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_NF_NAT is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV6 is not set +# CONFIG_NF_CONNTRACK_IPV6 is not set +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=y +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RT is not set +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_REJECT=y +# CONFIG_IP6_NF_MANGLE is not set +# CONFIG_IP6_NF_RAW is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +# CONFIG_FBXATM is not set +CONFIG_STP=y +CONFIG_BRIDGE=y +CONFIG_BRIDGE_IGMP_SNOOPING=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_FREEBOX_PROCFS=y +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_ERASE_PRINTK=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set +CONFIG_MTD_FBX6HD_PARTS=y +# CONFIG_MTD_FBX6HD_PARTS_WRITE_ALL is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_TS5500 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_BCH is not set +# CONFIG_MTD_SM_COMMON is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_FORCE_BAD_BLOCK_ERASE=y +# CONFIG_MTD_NAND_DENALI is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_CS553X is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DENALI_FBX=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_FREEBOX_MTD is not set +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +CONFIG_PROC_DEVICETREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_IRQ=y +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_SENSORS_LIS3LV02D is not set +CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_INTEL_MID_PTI is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_VMWARE_BALLOON is not set +CONFIG_INTELCE_PIC16PMU=y +# CONFIG_BMP085 is not set +# CONFIG_PCH_PHUB is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +CONFIG_CRASHZONE=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# RemoTI support +# +CONFIG_REMOTI=y +CONFIG_REMOTI_UART=y +CONFIG_REMOTI_LEDS=y +# CONFIG_REMOTI_GPIO is not set + +# +# HDMI CEC support +# +CONFIG_HDMI_CEC=m +CONFIG_HDMI_CEC_REMOTI=m +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=m +# CONFIG_SATA_AHCI_PLATFORM is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_ATA_SFF is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_MII is not set +# CONFIG_MACVLAN is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# +CONFIG_ETHERNET=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_DNET is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +CONFIG_E1000=y +# CONFIG_E1000E is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_NET_VENDOR_I825XX is not set +# CONFIG_IP1000 is not set +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_ETHOC is not set +# CONFIG_NET_PACKET_ENGINE is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_SFC is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +# CONFIG_PHYLIB is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_TR is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_AS5011 is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_CMA3000 is not set +# CONFIG_INPUT_SMSC_CAP1066 is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +# CONFIG_DEVKMEM is not set +CONFIG_DEVPHYSMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_RSA=y +# CONFIG_SERIAL_8250_DW is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MFD_HSU is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_PCH_UART is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set +# CONFIG_HW_RANDOM_GEODE is not set +# CONFIG_HW_RANDOM_VIA is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set +# CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +# CONFIG_RAMOOPS is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_MUX is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# ACPI drivers +# +# CONFIG_I2C_SCMI is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_INTEL_MID is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_PXA=y +CONFIG_I2C_PXA_PCI=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set +# CONFIG_I2C_EG20T is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set + +# +# PPS generators support +# + +# +# PTP clock support +# + +# +# Enable Device Drivers -> PPS to see the PTP clock options. +# +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO drivers: +# +# CONFIG_GPIO_GENERIC_PLATFORM is not set +# CONFIG_GPIO_IT8761E is not set +# CONFIG_GPIO_SCH is not set +# CONFIG_GPIO_VX855 is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set +# CONFIG_GPIO_PCH is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set + +# +# AC97 GPIO expanders: +# + +# +# MODULbus GPIO expanders: +# +# CONFIG_FREEBOX_GPIO is not set +# CONFIG_FREEBOX_JTAG is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ20Z75 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_GPIO is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +CONFIG_SENSORS_ADT7475=y +# CONFIG_SENSORS_ASC7621 is not set +# CONFIG_SENSORS_K8TEMP is not set +# CONFIG_SENSORS_K10TEMP is not set +# CONFIG_SENSORS_FAM15H_POWER is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_GPIO_FAN is not set +CONFIG_SENSORS_CORETEMP=y +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +CONFIG_SENSORS_LM85=y +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_ADS1015 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VIA_CPUTEMP is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_APPLESMC is not set + +# +# ACPI drivers +# +# CONFIG_SENSORS_ACPI_POWER is not set +# CONFIG_SENSORS_ATK0110 is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +# CONFIG_FREEBOX_WATCHDOG is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_CS5535 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_REGULATOR is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +# CONFIG_MEDIA_CONTROLLER is not set +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=y +# CONFIG_DVB_NET is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +CONFIG_RC_CORE=y +CONFIG_LIRC=y +CONFIG_RC_MAP=y +CONFIG_IR_NEC_DECODER=y +CONFIG_IR_RC5_DECODER=y +CONFIG_IR_RC6_DECODER=y +CONFIG_IR_JVC_DECODER=y +CONFIG_IR_SONY_DECODER=y +CONFIG_IR_RC5_SZ_DECODER=y +# CONFIG_IR_MCE_KBD_DECODER is not set +CONFIG_IR_LIRC_CODEC=y +# CONFIG_RC_ATI_REMOTE is not set +# CONFIG_IR_ENE is not set +# CONFIG_IR_IMON is not set +CONFIG_IR_MCEUSB=y +# CONFIG_IR_ITE_CIR is not set +# CONFIG_IR_FINTEK is not set +# CONFIG_IR_NUVOTON is not set +# CONFIG_IR_REDRAT3 is not set +# CONFIG_IR_STREAMZAP is not set +# CONFIG_IR_WINBOND_CIR is not set +# CONFIG_RC_LOOPBACK is not set +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +CONFIG_MEDIA_TUNER_CUSTOMISE=y + +# +# Customize TV tuners +# +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_XC4000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +# CONFIG_MEDIA_TUNER_MC44S803 is not set +# CONFIG_MEDIA_TUNER_MAX2165 is not set +# CONFIG_MEDIA_TUNER_TDA18218 is not set +# CONFIG_MEDIA_TUNER_TDA18212 is not set +CONFIG_DVB_MAX_ADAPTERS=8 +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y + +# +# Supported SAA7146 based PCI Adapters +# +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=y +# CONFIG_DVB_USB_DEBUG is not set +# CONFIG_DVB_USB_A800 is not set +# CONFIG_DVB_USB_DIBUSB_MB is not set +# CONFIG_DVB_USB_DIBUSB_MC is not set +CONFIG_DVB_USB_DIB0700=m +# CONFIG_DVB_USB_UMT_010 is not set +# CONFIG_DVB_USB_CXUSB is not set +# CONFIG_DVB_USB_M920X is not set +# CONFIG_DVB_USB_GL861 is not set +# CONFIG_DVB_USB_AU6610 is not set +# CONFIG_DVB_USB_DIGITV is not set +# CONFIG_DVB_USB_VP7045 is not set +# CONFIG_DVB_USB_VP702X is not set +# CONFIG_DVB_USB_GP8PSK is not set +# CONFIG_DVB_USB_NOVA_T_USB2 is not set +# CONFIG_DVB_USB_TTUSB2 is not set +# CONFIG_DVB_USB_DTT200U is not set +# CONFIG_DVB_USB_OPERA1 is not set +# CONFIG_DVB_USB_AF9005 is not set +# CONFIG_DVB_USB_PCTV452E is not set +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +# CONFIG_DVB_USB_CE6230 is not set +# CONFIG_DVB_USB_FRIIO is not set +# CONFIG_DVB_USB_EC168 is not set +# CONFIG_DVB_USB_AZ6027 is not set +# CONFIG_DVB_USB_LME2510 is not set +# CONFIG_DVB_USB_TECHNISAT_USB2 is not set +# CONFIG_DVB_USB_IT913X is not set +# CONFIG_DVB_USB_MXL111SF is not set +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +# CONFIG_SMS_SIANO_MDTV is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported BT878 Adapters +# + +# +# Supported Pluto2 Adapters +# +# CONFIG_DVB_PLUTO2 is not set + +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + +# +# Supported Earthsoft PT1 Adapters +# +# CONFIG_DVB_PT1 is not set + +# +# Supported Mantis Adapters +# +# CONFIG_MANTIS_CORE is not set + +# +# Supported nGene Adapters +# +# CONFIG_DVB_NGENE is not set + +# +# Supported ddbridge ('Octopus') Adapters +# +# CONFIG_DVB_DDBRIDGE is not set + +# +# Supported DVB Frontends +# +CONFIG_DVB_FE_CUSTOMISE=y + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set +# CONFIG_DVB_STV090x is not set +# CONFIG_DVB_STV6110x is not set + +# +# Multistandard (cable + terrestrial) frontends +# +# CONFIG_DVB_DRXK is not set +# CONFIG_DVB_TDA18271C2DD is not set + +# +# DVB-S (satellite) frontends +# +# CONFIG_DVB_CX24110 is not set +# CONFIG_DVB_CX24123 is not set +# CONFIG_DVB_MT312 is not set +# CONFIG_DVB_ZL10036 is not set +# CONFIG_DVB_ZL10039 is not set +# CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_STV6110 is not set +# CONFIG_DVB_STV0900 is not set +# CONFIG_DVB_TDA8083 is not set +# CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set +# CONFIG_DVB_DS3000 is not set +# CONFIG_DVB_MB86A16 is not set +# CONFIG_DVB_TDA10071 is not set + +# +# DVB-T (terrestrial) frontends +# +# CONFIG_DVB_SP8870 is not set +# CONFIG_DVB_SP887X is not set +# CONFIG_DVB_CX22700 is not set +# CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_S5H1432 is not set +# CONFIG_DVB_DRXD is not set +# CONFIG_DVB_L64781 is not set +# CONFIG_DVB_TDA1004X is not set +# CONFIG_DVB_NXT6000 is not set +# CONFIG_DVB_MT352 is not set +# CONFIG_DVB_ZL10353 is not set +# CONFIG_DVB_DIB3000MB is not set +# CONFIG_DVB_DIB3000MC is not set +CONFIG_DVB_DIB7000M=y +CONFIG_DVB_DIB7000P=y +# CONFIG_DVB_DIB9000 is not set +# CONFIG_DVB_TDA10048 is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DVB_EC100 is not set +# CONFIG_DVB_STV0367 is not set +# CONFIG_DVB_CXD2820R is not set + +# +# DVB-C (cable) frontends +# +# CONFIG_DVB_VES1820 is not set +# CONFIG_DVB_TDA10021 is not set +# CONFIG_DVB_TDA10023 is not set +# CONFIG_DVB_STV0297 is not set + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +# CONFIG_DVB_NXT200X is not set +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +# CONFIG_DVB_BCM3510 is not set +# CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3305 is not set +# CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_S5H1411 is not set + +# +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set +# CONFIG_DVB_DIB8000 is not set +# CONFIG_DVB_MB86A20S is not set + +# +# Digital terrestrial only tuners/PLL +# +# CONFIG_DVB_PLL is not set +CONFIG_DVB_TUNER_DIB0070=y +# CONFIG_DVB_TUNER_DIB0090 is not set + +# +# SEC control devices for DVB-S +# +# CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_LNBP22 is not set +# CONFIG_DVB_ISL6405 is not set +# CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_ISL6423 is not set +# CONFIG_DVB_A8293 is not set +# CONFIG_DVB_LGS8GL5 is not set +# CONFIG_DVB_LGS8GXX is not set +# CONFIG_DVB_ATBM8830 is not set +# CONFIG_DVB_TDA665x is not set +# CONFIG_DVB_IX2505V is not set +# CONFIG_DVB_IT913X_FE is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_VGA_ARB is not set +# CONFIG_VGA_SWITCHEROO is not set +# CONFIG_DRM is not set +# CONFIG_STUB_POULSBO is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_MIXER_OSS is not set +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_PCM_OSS_PLUGINS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DMA_SGBUF=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ASIHPI is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_US122L is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACRUX is not set +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_PRODIKEYS is not set +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EMS_FF is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_KEYTOUCH is not set +CONFIG_HID_KYE=y +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +# CONFIG_HID_LCPOWER is not set +CONFIG_HID_LOGITECH=y +# CONFIG_HID_LOGITECH_DJ is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_MULTITOUCH is not set +CONFIG_HID_NTRIG=y +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_QUANTA is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAMSUNG is not set +CONFIG_HID_SONY=y +# CONFIG_HID_SPEEDLINK is not set +CONFIG_HID_SUNPLUS=y +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +CONFIG_HID_TOPSEED=y +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB_ARCH_HAS_XHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_FREEBOX_PANEL is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# Virtio drivers +# +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set +# CONFIG_VIRTIO_MMIO is not set +# CONFIG_STAGING is not set +# CONFIG_X86_PLATFORM_DEVICES is not set + +# +# IntelCE devices +# +CONFIG_INTELCE_GPIO=y +CONFIG_INTELCE_DFX=y + +# +# Hardware Spinlock drivers +# +CONFIG_CLKSRC_I8253=y +CONFIG_CLKEVT_I8253=y +CONFIG_CLKBLD_I8253=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_VIRT_DRIVERS is not set +# CONFIG_HYPERV is not set +# CONFIG_PM_DEVFREQ is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +CONFIG_FIRMWARE_MEMMAP=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +# CONFIG_ISCSI_IBFT_FIND is not set +# CONFIG_SIGMA is not set +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_XFS_FS=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +# CONFIG_QUOTA is not set +# CONFIG_QUOTACTL is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS_XATTR=y +CONFIG_RAMFS_XATTR_USER=y +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +CONFIG_HFS_FS=y +CONFIG_HFSPLUS_FS=y +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_LOGFS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFS_USE_NEW_IDMAPPER is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=0 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOCKUP_DETECTOR=y +CONFIG_HARDLOCKUP_DETECTOR=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1 +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_VIRTUAL is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_RCU_CPU_STALL_VERBOSE=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KMEMCHECK=y +# CONFIG_TEST_KSTRTOX is not set +CONFIG_STRICT_DEVMEM=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_DBGP is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +CONFIG_DEBUG_RODATA_TEST=y +# CONFIG_DEBUG_SET_MODULE_RONX is not set +# CONFIG_DEBUG_NX_TEST is not set +CONFIG_DOUBLEFAULT=y +# CONFIG_IOMMU_STRESS is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set +# CONFIG_OPTIMIZE_INLINING is not set +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_BUILTIN_TEST=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CRC32C_INTEL is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_AES_NI_INTEL is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +# CONFIG_VIRTUALIZATION is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +# CONFIG_CRC8 is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_XZ_DEC is not set +# CONFIG_XZ_DEC_BCJ is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_NLATTR=y +# CONFIG_AVERAGE is not set +# CONFIG_CORDIC is not set +CONFIG_FBXSERIAL=y diff -Nruw linux-3.2.13-fbx/drivers/fbxgpio./Kconfig linux-3.2.13-fbx/drivers/fbxgpio/Kconfig --- linux-3.2.13-fbx/drivers/fbxgpio./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxgpio/Kconfig 2012-11-30 16:07:16.526641548 +0100 @@ -0,0 +1,3 @@ +config FREEBOX_GPIO + tristate "Freebox GPIO control interface" + default n diff -Nruw linux-3.2.13-fbx/drivers/fbxgpio./Makefile linux-3.2.13-fbx/drivers/fbxgpio/Makefile --- linux-3.2.13-fbx/drivers/fbxgpio./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxgpio/Makefile 2012-11-30 16:07:16.526641548 +0100 @@ -0,0 +1 @@ +obj-$(CONFIG_FREEBOX_GPIO) += fbxgpio_core.o diff -Nruw linux-3.2.13-fbx/drivers/fbxjtag./Kconfig linux-3.2.13-fbx/drivers/fbxjtag/Kconfig --- linux-3.2.13-fbx/drivers/fbxjtag./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxjtag/Kconfig 2011-01-06 02:17:51.082068196 +0100 @@ -0,0 +1,3 @@ +config FREEBOX_JTAG + tristate "Freebox JTAG control interface" + default n diff -Nruw linux-3.2.13-fbx/drivers/fbxjtag./Makefile linux-3.2.13-fbx/drivers/fbxjtag/Makefile --- linux-3.2.13-fbx/drivers/fbxjtag./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxjtag/Makefile 2011-01-06 02:17:51.082068196 +0100 @@ -0,0 +1 @@ +obj-$(CONFIG_FREEBOX_JTAG) += fbxjtag.o diff -Nruw linux-3.2.13-fbx/drivers/fbxmtd./Kconfig linux-3.2.13-fbx/drivers/fbxmtd/Kconfig --- linux-3.2.13-fbx/drivers/fbxmtd./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxmtd/Kconfig 2012-11-30 16:07:16.530641548 +0100 @@ -0,0 +1,41 @@ +menuconfig FREEBOX_MTD + tristate "Freebox Memory Technology Devices (FBXMTD) support" + +if FREEBOX_MTD + +config FREEBOX_MTD_BACKEND_AMD + bool "Support for AMD compatible flash" + +config FREEBOX_MTD_BACKEND_INTEL + bool "Support for Intel Strataflash" + +config FREEBOX_MTD_BLK + tristate "Block device access to fbxmtd" + depends on BLOCK + +config FREEBOX_MTD_CHAR + tristate "Character device access to fbxmtd" + + +comment "Mapping drivers" + +# +# Generic mapping driver. +# +config FREEBOX_MTD_MAP_DRV_FBX + tristate "Freebox mapping Driver." + select CRC32 + +config FREEBOX_MTD_MAP_DRV_BCM963XX + tristate "Broadcom 963xx flash format" + select CRC32 + +# +# Freebox MTD Map Control interface +# +config FREEBOX_MTD_MAP_IOCTL + tristate "IOCTL control interface" + depends on FREEBOX_MTD_MAP_DRV_FBX + +endif + diff -Nruw linux-3.2.13-fbx/drivers/fbxmtd./Makefile linux-3.2.13-fbx/drivers/fbxmtd/Makefile --- linux-3.2.13-fbx/drivers/fbxmtd./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxmtd/Makefile 2012-11-30 16:07:16.530641548 +0100 @@ -0,0 +1,24 @@ + +# core support +obj-$(CONFIG_FREEBOX_MTD) += fbxmtd.o + +fbxmtd-objs += fbxmtd_core.o fbxmtd_core_io.o +ifeq ($(CONFIG_FREEBOX_MTD_BACKEND_AMD),y) +fbxmtd-objs += fbxmtd_core_amd.o +endif + +ifeq ($(CONFIG_FREEBOX_MTD_BACKEND_INTEL),y) +fbxmtd-objs += fbxmtd_core_intel.o +endif + +# generic character device access support (r/w with read erase modify write) +obj-$(CONFIG_FREEBOX_MTD_CHAR) += fbxmtd_char.o +fbxmtd_char-objs += fbxmtd_char_dev.o + +# generic r/o block device access support +obj-$(CONFIG_FREEBOX_MTD_BLK) += fbxmtd_blk.o +fbxmtd_blk-objs += fbxmtd_blk_dev.o + +obj-$(CONFIG_FREEBOX_MTD_MAP_DRV_FBX) += fbxmtd_map_drv_fbx.o +obj-$(CONFIG_FREEBOX_MTD_MAP_DRV_BCM963XX) += fbxmtd_map_drv_bcm963xx.o +obj-$(CONFIG_FREEBOX_MTD_MAP_IOCTL) += fbxmtd_map_ioctl.o diff -Nruw linux-3.2.13-fbx/drivers/fbxpanel./Kconfig linux-3.2.13-fbx/drivers/fbxpanel/Kconfig --- linux-3.2.13-fbx/drivers/fbxpanel./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxpanel/Kconfig 2012-11-30 16:07:16.530641548 +0100 @@ -0,0 +1,13 @@ +menuconfig FREEBOX_PANEL + tristate "Freebox Panel Management" + default n + +if FREEBOX_PANEL + +config FREEBOX_PANEL_HW_PIC_FBX + tristate "I2C PIC-based Panel driver." + default n + select I2C + +endif + diff -Nruw linux-3.2.13-fbx/drivers/fbxpanel./Makefile linux-3.2.13-fbx/drivers/fbxpanel/Makefile --- linux-3.2.13-fbx/drivers/fbxpanel./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxpanel/Makefile 2012-11-30 16:07:16.546641550 +0100 @@ -0,0 +1,5 @@ +obj-$(CONFIG_FREEBOX_PANEL) += fbxpanel.o + +fbxpanel-objs = fbxpanel_class.o fbxpanel_anim.o + +obj-$(CONFIG_FREEBOX_PANEL_HW_PIC_FBX) += fbxpanel_hw_pic_fbx.o diff -Nruw linux-3.2.13-fbx/drivers/fbxprocfs./fbxprocfs.c linux-3.2.13-fbx/drivers/fbxprocfs/fbxprocfs.c --- linux-3.2.13-fbx/drivers/fbxprocfs./fbxprocfs.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxprocfs/fbxprocfs.c 2011-11-04 14:26:06.983889222 +0100 @@ -0,0 +1,205 @@ +/* + * Freebox ProcFs interface + */ + +#include +#include +#include +#include + +#include + +#define PFX "fbxprocfs: " + + +static struct list_head clients; +static struct mutex clients_mutex; + +static struct proc_dir_entry *root; + +/* + * register a fbxprocfs client with given dirname, caller should + * consider returned struct opaque + */ +struct fbxprocfs_client *fbxprocfs_add_client(const char *dirname, + struct module *owner) +{ + struct fbxprocfs_client *ret, *p; + + ret = NULL; + mutex_lock(&clients_mutex); + + /* check for duplicate */ + list_for_each_entry(p, &clients, list) { + if (!strcmp(dirname, p->dirname)) + goto out; + } + + if (!(ret = kmalloc(sizeof (*ret), GFP_KERNEL))) { + printk(KERN_ERR PFX "kmalloc failed\n"); + goto out; + } + + /* try to create client directory */ + if (!(ret->dir = proc_mkdir(dirname, root))) { + printk(KERN_ERR PFX "can't create %s dir\n", dirname); + kfree(ret); + ret = NULL; + goto out; + } + + atomic_set(&ret->refcount, 1); + ret->dirname = dirname; + list_add(&ret->list, &clients); + +out: + mutex_unlock(&clients_mutex); + return ret; +} + +/* + * unregister a fbxprocfs client, make sure usage count is zero + */ +int fbxprocfs_remove_client(struct fbxprocfs_client *client) +{ + int ret; + + mutex_lock(&clients_mutex); + + ret = 0; + if (atomic_read(&client->refcount) > 1) { + ret = -EBUSY; + goto out; + } + + remove_proc_entry(client->dirname, root); + list_del(&client->list); + kfree(client); + +out: + mutex_unlock(&clients_mutex); + return ret; +} + +/* + * remove given entries from client directory + */ +static int +__remove_entries(struct fbxprocfs_client *client, + const struct fbxprocfs_ro_desc *ro_desc, + const struct fbxprocfs_rw_desc *rw_desc) +{ + int i; + + for (i = 0; ro_desc && ro_desc[i].name; i++) { + remove_proc_entry(ro_desc[i].name, client->dir); + atomic_dec(&client->refcount); + } + + for (i = 0; rw_desc && rw_desc[i].name; i++) { + remove_proc_entry(rw_desc[i].name, client->dir); + atomic_dec(&client->refcount); + } + + return 0; +} + +/* + * create given entries in client directory + */ +static int +__create_entries(struct fbxprocfs_client *client, + const struct fbxprocfs_ro_desc *ro_desc, + const struct fbxprocfs_rw_desc *rw_desc) +{ + struct proc_dir_entry *proc; + int i; + + for (i = 0; ro_desc && ro_desc[i].name; i++) { + if (!(proc = create_proc_read_entry(ro_desc[i].name, 0, + client->dir, + ro_desc[i].rfunc, + (void *) ro_desc[i].id))) { + printk(KERN_ERR PFX "can't create %s/%s entry\n", + client->dirname, ro_desc[i].name); + goto err; + } + atomic_inc(&client->refcount); + } + + for (i = 0; rw_desc && rw_desc[i].name; i++) { + if (!(proc = create_proc_entry(rw_desc[i].name, 0, + client->dir))) { + printk(KERN_ERR PFX "can't create %s/%s entry\n", + client->dirname, ro_desc[i].name); + goto err; + } + + proc->read_proc = rw_desc[i].rfunc; + proc->write_proc = rw_desc[i].wfunc; + proc->data = (void *)rw_desc[i].id; + atomic_inc(&client->refcount); + } + + return 0; + +err: + __remove_entries(client, ro_desc, rw_desc); + return -1; +} + +int +fbxprocfs_create_entries(struct fbxprocfs_client *client, + const struct fbxprocfs_ro_desc *ro_desc, + const struct fbxprocfs_rw_desc *rw_desc) +{ + int ret; + + ret = __create_entries(client, ro_desc, rw_desc); + return ret; +} + +int +fbxprocfs_remove_entries(struct fbxprocfs_client *client, + const struct fbxprocfs_ro_desc *ro_desc, + const struct fbxprocfs_rw_desc *rw_desc) +{ + int ret; + + ret = __remove_entries(client, ro_desc, rw_desc); + return ret; +} + + +static int __init +fbxprocfs_init(void) +{ + INIT_LIST_HEAD(&clients); + mutex_init(&clients_mutex); + + /* create freebox directory */ + if (!(root = proc_mkdir("freebox", NULL))) { + printk(KERN_ERR PFX "can't create freebox/ dir\n"); + return -EIO; + } + return 0; +} + +static void __exit +fbxprocfs_exit(void) +{ + remove_proc_entry("freebox", NULL); +} + +module_init(fbxprocfs_init); +module_exit(fbxprocfs_exit); + +EXPORT_SYMBOL(fbxprocfs_create_entries); +EXPORT_SYMBOL(fbxprocfs_remove_entries); +EXPORT_SYMBOL(fbxprocfs_add_client); +EXPORT_SYMBOL(fbxprocfs_remove_client); + +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Maxime Bizon "); + diff -Nruw linux-3.2.13-fbx/drivers/fbxprocfs./Kconfig linux-3.2.13-fbx/drivers/fbxprocfs/Kconfig --- linux-3.2.13-fbx/drivers/fbxprocfs./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxprocfs/Kconfig 2011-01-06 02:17:51.082068196 +0100 @@ -0,0 +1,2 @@ +config FREEBOX_PROCFS + tristate "Freebox procfs interface" diff -Nruw linux-3.2.13-fbx/drivers/fbxprocfs./Makefile linux-3.2.13-fbx/drivers/fbxprocfs/Makefile --- linux-3.2.13-fbx/drivers/fbxprocfs./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxprocfs/Makefile 2011-01-06 02:17:51.082068196 +0100 @@ -0,0 +1 @@ +obj-$(CONFIG_FREEBOX_PROCFS) += fbxprocfs.o diff -Nruw linux-3.2.13-fbx/drivers/fbxwatchdog./Kconfig linux-3.2.13-fbx/drivers/fbxwatchdog/Kconfig --- linux-3.2.13-fbx/drivers/fbxwatchdog./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxwatchdog/Kconfig 2012-11-30 16:07:16.546641550 +0100 @@ -0,0 +1,20 @@ +menuconfig FREEBOX_WATCHDOG + tristate "Freebox Watchdog" + default n + +if FREEBOX_WATCHDOG + +config FREEBOX_WATCHDOG_CHAR + bool "Freebox Watchdog char device interface." + default n + +config FREEBOX_WATCHDOG_ORION + tristate "Marvell Orion support" + depends on PLAT_ORION + +config FREEBOX_WATCHDOG_BCM63XX + tristate "Broadcom 63xx Freebox Watchdog support" + depends on BCM63XX + default n + +endif diff -Nruw linux-3.2.13-fbx/drivers/fbxwatchdog./Makefile linux-3.2.13-fbx/drivers/fbxwatchdog/Makefile --- linux-3.2.13-fbx/drivers/fbxwatchdog./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/fbxwatchdog/Makefile 2012-11-30 16:07:16.546641550 +0100 @@ -0,0 +1,9 @@ +obj-$(CONFIG_FREEBOX_WATCHDOG) += fbxwatchdog.o + +fbxwatchdog-objs = fbxwatchdog_core.o +ifeq ($(CONFIG_FREEBOX_WATCHDOG_CHAR),y) +fbxwatchdog-objs += fbxwatchdog_char.o +endif + +obj-$(CONFIG_FREEBOX_WATCHDOG_ORION) += fbxwatchdog_orion.o +obj-$(CONFIG_FREEBOX_WATCHDOG_BCM63XX) += fbxwatchdog_bcm63xx.o diff -Nruw linux-3.2.13-fbx/drivers/media/dvb/tango2./Kconfig linux-3.2.13-fbx/drivers/media/dvb/tango2/Kconfig --- linux-3.2.13-fbx/drivers/media/dvb/tango2./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/tango2/Kconfig 2012-11-30 16:14:27.562661608 +0100 @@ -0,0 +1,11 @@ +config DVB_TANGO2 + tristate "Tango2 DVB adapter" + depends on DVB_CORE && ARCH_FBX5_B + select I2C + select I2C_ALGOBIT + select DVB_TDA1004X + select DVB_PLL + +config DVB_TANGO2_TESTBED + bool "extended testing and useful error codes" + depends on DVB_TANGO2 diff -Nruw linux-3.2.13-fbx/drivers/media/dvb/tango2./Makefile linux-3.2.13-fbx/drivers/media/dvb/tango2/Makefile --- linux-3.2.13-fbx/drivers/media/dvb/tango2./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/media/dvb/tango2/Makefile 2012-11-30 16:07:17.278641583 +0100 @@ -0,0 +1,5 @@ +obj-$(CONFIG_DVB_TANGO2) = tango2_dvb.o + +tango2_dvb-objs := tango2.o + +EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/drivers/misc/crash_zone.c 2013-06-13 15:06:40.162518380 +0200 @@ -0,0 +1,192 @@ +#include +#include +#include +#include +#include +#include + +static unsigned char *dead_zone = NULL; +static unsigned int dead_zone_size; + +#define CRASH_DATA_SIZE (dead_zone_size - sizeof (struct crash_zone)) + +static inline unsigned short int csum_data(const unsigned char *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +static int crash_zone_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + struct crash_header *crash_zone; + int datalen; + + /* check crash zone */ + if (!dead_zone) { + printk(KERN_DEBUG "dead zone unset\n"); + goto empty; + } + + crash_zone = (struct crash_header *)dead_zone; + if (crash_zone->magic != CRASH_MAGIC) { + printk(KERN_DEBUG "bad crash zone magic\n"); + goto empty; + } + + if (crash_zone->len > dead_zone_size) { + printk(KERN_DEBUG "bad crash zone len\n"); + goto empty; + } + + if (csum_data((unsigned char *)crash_zone, crash_zone->len)) { + printk(KERN_DEBUG "bad crash zone checksum\n"); + goto empty; + } + + /* copy crash data */ + datalen = crash_zone->len - sizeof (struct crash_header); + if (off + count >= datalen) { + *eof = 1; + count = datalen - off; + } + + *start = page; + if (count > 0) { + memcpy(page, &crash_zone->data + off, count); + return count; + } + + return 0; + +empty: + *eof = 1; + return 0; +} + +static int crash_zone_write_proc(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + struct crash_header *crash_zone; + int len; + + if (!dead_zone) + return count; + + /* empty the crash zone */ + crash_zone = (struct crash_header *)dead_zone; + len = sizeof (struct crash_header); + crash_zone->magic = CRASH_MAGIC; + crash_zone->len = len; + crash_zone->checksum = 0; + crash_zone->checksum = csum_data((unsigned char *)crash_zone, len); + + return count; +} + +static int crash_zone_panic_event(struct notifier_block *self, + unsigned long event, void *data) +{ + struct crash_header *crash_zone; + int data_len, len; + + if (!dead_zone) + return NOTIFY_DONE; + + crash_zone = (struct crash_header *)dead_zone; + + /* copy current kernel log into crash zone */ + data_len = dead_zone_size - sizeof (struct crash_header); + console_emergency_dump(&crash_zone->data, &data_len); + + /* checksum area */ + len = data_len + sizeof (struct crash_header); + crash_zone->magic = CRASH_MAGIC; + crash_zone->len = len; + crash_zone->checksum = 0; + crash_zone->checksum = csum_data((unsigned char *)crash_zone, len); + printk("Panic log saved in crash zone\n"); + + return NOTIFY_DONE; +} + +static struct notifier_block crash_panic_block = { + crash_zone_panic_event, + NULL, + INT_MAX /* try to do it first */ +}; + +void __init crash_zone_set_param(unsigned char *zone, unsigned int size) +{ + dead_zone = zone; + dead_zone_size = size; +} + +#ifdef CONFIG_OF +static struct of_device_id crash_zone_of_ids[] __initdata = { + { .compatible = "fbx,crashzone" }, + { /* sentinel */ }, +}; + +int __init crash_zone_of_init(void) +{ + struct device_node *np; + void __iomem *base; + struct resource res; + int ret = 0; + + np = of_find_matching_node(NULL, crash_zone_of_ids); + if (!np) { + pr_err("no crashzone node found in dtb\n"); + return -ENODEV; + } + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + pr_err("unable to find crashzone registers\n"); + ret = -ENODEV; + goto out; + } + + base = of_iomap(np, 0); + if (!base) { + pr_err("unable to remap crashzone resource\n"); + ret = -ENOMEM; + goto out; + } + + crash_zone_set_param(base, resource_size(&res)); +out: + of_node_put(np); + return ret; +} +#else +int __init crash_zone_of_init(void) +{ + return 0; +} +#endif + +static int __init crash_zone_init(void) +{ + struct proc_dir_entry *proc; + + /* create crash proc entry */ + proc = create_proc_entry("crash_zone", 0, NULL); + if (!proc) + return 1; + proc->read_proc = crash_zone_read_proc; + proc->write_proc = crash_zone_write_proc; + + /* register panic notifier */ + atomic_notifier_chain_register(&panic_notifier_list, + &crash_panic_block); + return 0; +} + +static void __exit crash_zone_exit(void) +{ + +} + +module_init(crash_zone_init); +module_exit(crash_zone_exit); diff -Nruw linux-3.2.13-fbx/drivers/misc/hdmi-cec./core.c linux-3.2.13-fbx/drivers/misc/hdmi-cec/core.c --- linux-3.2.13-fbx/drivers/misc/hdmi-cec./core.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/hdmi-cec/core.c 2013-06-13 15:06:40.170518376 +0200 @@ -0,0 +1,571 @@ +/* + * HDMI Consumer Electronics Control, core module + * + * Copyright (C) 2011, Florian Fainelli + * + * This file is subject to the GPLv2 licensing terms. + * + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define CEC_RX_QUEUE_MAX_LEN (20) + +/* + * CEC bus + */ +static int cec_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + return 0; +} + +static int cec_bus_match(struct device *dev, struct device_driver *driver) +{ + /* we have no way of matching a device with a driver yet */ + return 1; +} + +static struct bus_type cec_bus_type = { + .name = "cec", + .match = cec_bus_match, + .uevent = cec_uevent, +}; + +/* + * CEC driver + */ +static int cec_driver_probe(struct device *dev) +{ + struct cec_device *cec_dev = to_cec_device(dev); + + return cec_create_dev_node(cec_dev); +} + +static int cec_driver_remove(struct device *dev) +{ + struct cec_device *cec_dev = to_cec_device(dev); + struct cec_driver *drv = to_cec_driver(dev->driver); + + cec_flush_queues(drv); + cec_remove_dev_node(cec_dev); + + return 0; +} + +/** + * cec_set_logical_address() - sets the cec logical address + * @drv: driver pointer + * @addr: logical address + * + * calls the driver spefific set_logical_address callback to + * set the cec adapter logical address. + */ +int cec_set_logical_address(struct cec_driver *drv, const u8 addr) +{ + int ret; + + if (addr > CEC_ADDR_MAX) + return -EINVAL; + + mutex_lock(&drv->lock); + ret = drv->ops->set_logical_address(drv, addr); + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * __cec_rx_queue_len() - returns the lenght of a cec driver rx queue + * @drv: driver pointer + */ +unsigned __cec_rx_queue_len(struct cec_driver *drv) +{ + unsigned qlen; + + mutex_lock(&drv->rx_msg_list_lock); + qlen = drv->rx_msg_len; + mutex_unlock(&drv->rx_msg_list_lock); + + return qlen; +} + +/** + * cec_flush_queues() - flushes a cec driver rx queue + * @drv: driver pointer + */ +void cec_flush_queues(struct cec_driver *drv) +{ + struct cec_kmsg *cur, *next; + + mutex_lock(&drv->lock); + + cancel_work_sync(&drv->tx_work); + list_for_each_entry_safe(cur, next, &drv->rx_msg_list, next) { + list_del(&cur->next); + kfree(cur); + drv->rx_msg_len--; + } + + mutex_unlock(&drv->lock); +} + +/** + * cec_receive_message() - receive a cec message for a given driver + * @drv:: driver pointer + * @data: message blob + * @len: message length + * + * Called by drivers to add a message to the driver's RX queue + */ +int cec_receive_message(struct cec_driver *drv, const u8 *data, const u8 len) +{ + struct cec_kmsg *kmsg; + int ret = 0; + + if (!len || len > CEC_MAX_MSG_LEN) + return -EINVAL; + + mutex_lock(&drv->lock); + if (!drv->attached) { + pr_debug("%s: no client attached, dropping", drv->name); + goto out; + } + + mutex_lock(&drv->rx_msg_list_lock); + if (drv->rx_msg_len >= CEC_RX_QUEUE_MAX_LEN) { + pr_debug("%s: queue full!\n", drv->name); + ret = -ENOSPC; + goto out_unlock; + } + + kmsg = list_entry(drv->rx_msg_list.next, + struct cec_kmsg, + next); + if (kmsg->status == CEC_MSG_SENT) { + kmsg->status = CEC_MSG_COMPLETED; + complete(&kmsg->completion); + } else { + kmsg = kzalloc(sizeof(*kmsg), GFP_KERNEL); + if (!kmsg) { + ret = ENOMEM; + goto out_unlock; + } + + list_add_tail(&kmsg->next, &drv->rx_msg_list); + drv->rx_msg_len++; + } + + memcpy(kmsg->msg.data, data, len); + kmsg->msg.len = len; +out_unlock: + mutex_unlock(&drv->rx_msg_list_lock); +out: + mutex_unlock(&drv->lock); + + /* wake up clients, they can dequeue a buffer now */ + wake_up_interruptible(&drv->rx_wait); + + return ret; +} +EXPORT_SYMBOL(cec_receive_message); + +/** + * cec_dequeue_message() - dequeue a message from the driver's rx queue + * @drv: driver pointer + * @msg: cec user-space exposed message pointer + * + * Dequeue a message from the driver's RX queue + */ +int cec_dequeue_message(struct cec_driver *drv, struct cec_msg *msg) +{ + int ret = 0; + struct cec_kmsg *kmsg; + + mutex_lock(&drv->lock); + mutex_lock(&drv->rx_msg_list_lock); + if (list_empty(&drv->rx_msg_list)) { + pr_debug("%s: no message in queue\n", drv->name); + ret = -ENOENT; + goto out; + } + + kmsg = list_entry(drv->rx_msg_list.next, + struct cec_kmsg, next); + memcpy(msg, &kmsg->msg, sizeof(*msg)); + list_del(&kmsg->next); + kfree(kmsg); + drv->rx_msg_len--; +out: + mutex_unlock(&drv->rx_msg_list_lock); + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * cec_read_message() - reads a cec message from the driver's rx queue + * @drv: driver pointer + * @msg: cec user-space exposed message pointer + * + * Reads a CEC message from the driver's RX queue in blocking mode with + * either a finite or inifinite timeout + */ +int cec_read_message(struct cec_driver *drv, struct cec_msg *msg) +{ + int ret = 0; + struct cec_kmsg *kmsg; + unsigned timeout = 1; + + kmsg = kzalloc(sizeof(*kmsg), GFP_KERNEL); + if (!kmsg) + return -ENOMEM; + + kmsg->msg.timeout = msg->timeout; + kmsg->status = CEC_MSG_SENT; + init_completion(&kmsg->completion); + + mutex_lock(&drv->rx_msg_list_lock); + list_add_tail(&kmsg->next, &drv->rx_msg_list); + drv->rx_msg_len++; + mutex_unlock(&drv->rx_msg_list_lock); + + /* timeout for a fixed duration or infinite */ + if (kmsg->msg.timeout > 0) + timeout = wait_for_completion_interruptible_timeout( + &kmsg->completion, + kmsg->msg.timeout * HZ); + else + wait_for_completion_interruptible(&kmsg->completion); + + if (!__cec_rx_queue_len(drv)) + ret = -ENOENT; + else if (!timeout || kmsg->status != CEC_MSG_COMPLETED) + ret = -ETIMEDOUT; + + mutex_lock(&drv->rx_msg_list_lock); + /* copy answer back to caller */ + memcpy(msg, &kmsg->msg, sizeof(*msg)); + list_del(&kmsg->next); + kfree(kmsg); + drv->rx_msg_len--; + mutex_unlock(&drv->rx_msg_list_lock); + + return ret; +} + +/* + * CEC transmit work queue callback + */ +static void cec_tx_work(struct work_struct *work) +{ + struct cec_driver *drv; + struct cec_kmsg *pending; + + drv = container_of(work, struct cec_driver, tx_work); + + mutex_lock(&drv->tx_msg_list_lock); + if (list_empty(&drv->tx_msg_list)) + goto out_exit; + + pending = list_entry(drv->tx_msg_list.next, + struct cec_kmsg, next); + if (pending->status != CEC_MSG_QUEUED) + goto out_exit; + + pending->status = CEC_MSG_SENT; + pending->ret = drv->ops->send(drv, pending->msg.data, + pending->msg.len); + if (!pending->ret) + pending->status = CEC_MSG_COMPLETED; + + /* complete the message anyway */ + complete(&pending->completion); + +out_exit: + mutex_unlock(&drv->tx_msg_list_lock); + return; +} + +/** + * cec_send_message() - sends an user fed cec message + * @drv: driver pointer + * @msg: user-exposed cec message pointer + * + * Send a message using the specific adapter real sending done in workqueue + */ +int cec_send_message(struct cec_driver *drv, + struct cec_msg *msg) +{ + int ret = 0; + unsigned int timeout; + struct cec_kmsg *kmsg; + + if (!msg->len || msg->len > CEC_MAX_MSG_LEN) + return -EINVAL; + + mutex_lock(&drv->lock); + kmsg = kzalloc(sizeof(*kmsg), GFP_KERNEL); + if (!kmsg) { + ret = -ENOMEM; + goto out; + } + + memcpy(&kmsg->msg, msg, sizeof(*msg)); + + /* specification says there is a maximum 1s desired response time */ + if (!kmsg->msg.timeout) + kmsg->msg.timeout = HZ; + init_completion(&kmsg->completion); + + mutex_lock(&drv->tx_msg_list_lock); + list_add_tail(&kmsg->next, &drv->tx_msg_list); + mutex_unlock(&drv->tx_msg_list_lock); + + /* kick transmission */ + schedule_work(&drv->tx_work); + timeout = wait_for_completion_interruptible_timeout( + &kmsg->completion, + kmsg->msg.timeout); + mutex_lock(&drv->tx_msg_list_lock); + if (kmsg->status != CEC_MSG_COMPLETED) { + if (!timeout && kmsg->msg.timeout) + ret = -ETIMEDOUT; + else if (kmsg->msg.timeout) + ret = kmsg->ret; + else + ret = 0; + } + + list_del(&kmsg->next); + kfree(kmsg); + mutex_unlock(&drv->tx_msg_list_lock); +out: + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * cec_reset_device() - resets a cec driver + * @drv: driver pointer + * + * Resets a CEC device to a sane state + */ +int cec_reset_device(struct cec_driver *drv) +{ + int ret; + + mutex_lock(&drv->lock); + cancel_work_sync(&drv->tx_work); + ret = drv->ops->reset(drv); + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * cec_get_counters() - gets counters from a cec driver + * @drv: driver pointer + * @cnt: struct cec_counters pointer + * + * Get counters from the CEC adapter if supported, driver should advertise + * CEC_HW_HAS_COUNTERS flag + */ +int cec_get_counters(struct cec_driver *drv, struct cec_counters *cnt) +{ + int ret = -ENOTSUPP; + + mutex_lock(&drv->lock); + if (drv->flags & CEC_HW_HAS_COUNTERS) + ret = drv->ops->get_counters(drv, cnt); + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * cec_set_rx_mode() - sets the adapter receive mode + * @drv: driver pointer + * @mode: receive mode (accept all, unicast only) + * + * Set the receive mode filter of the driver + */ +int cec_set_rx_mode(struct cec_driver *drv, enum cec_rx_mode mode) +{ + int ret; + + if (~drv->flags & CEC_HW_HAS_RX_FILTER) + return -ENOTSUPP; + + if (mode >= CEC_RX_MODE_MAX) + return -EINVAL; + + mutex_lock(&drv->lock); + ret = drv->ops->set_rx_mode(drv, mode); + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * cec_attach_host - attaches a host to the driver + * @drv: driver pointer + * + * Attaches the host to the driver. In case the hardware is able + * to process CEC messages itself, it should now send them to the + * host for processing + */ +int cec_attach_host(struct cec_driver *drv) +{ + int ret = 0; + + if (drv->attached) + return -EBUSY; + + mutex_lock(&drv->lock); + if (drv->ops->attach) + ret = drv->ops->attach(drv); + if (!ret) + drv->attached = true; + mutex_unlock(&drv->lock); + return ret; +} + +/** + * cec_detach_host - detaches a host from the driver + * @drv: driver pointer + * + * Detaches the host from the driver. In case the hardware is able + * to process CEC messages itself, it should now keep the messages for + * itself and no longer send them to the host + */ +int cec_detach_host(struct cec_driver *drv) +{ + mutex_lock(&drv->lock); + if (drv->ops->detach(drv)) + drv->ops->detach(drv); + drv->attached = false; + mutex_unlock(&drv->lock); + + return 0; +} + +/** + * register_cec_driver() - registers a new cec driver + * @cec_drv: cec_driver pointer + */ +int register_cec_driver(struct cec_driver *cec_drv) +{ + cec_drv->driver.bus = &cec_bus_type; + cec_drv->driver.name = cec_drv->name; + cec_drv->driver.probe = cec_driver_probe; + cec_drv->driver.remove = cec_driver_remove; + + mutex_init(&cec_drv->lock); + init_waitqueue_head(&cec_drv->rx_wait); + + mutex_init(&cec_drv->tx_msg_list_lock); + INIT_LIST_HEAD(&cec_drv->tx_msg_list); + INIT_WORK(&cec_drv->tx_work, cec_tx_work); + + mutex_init(&cec_drv->rx_msg_list_lock); + INIT_LIST_HEAD(&cec_drv->rx_msg_list); + cec_drv->rx_msg_len = 0; + + return driver_register(&cec_drv->driver); +} +EXPORT_SYMBOL(register_cec_driver); + +/** + * unregister_cec_driver() - unregisters a cec driver + * @cec_drv: cec_driver pointer + */ +void unregister_cec_driver(struct cec_driver *cec_drv) +{ + driver_unregister(&cec_drv->driver); +} +EXPORT_SYMBOL(unregister_cec_driver); + + +/* + * CEC device + */ +static void cec_device_release(struct device *dev) +{ + return; +} + +static unsigned cec_device_count; + +/** + * register_cec_device() - registers a new cec device + * @cec_dev: cec_device pointer + */ +int register_cec_device(struct cec_device *cec_dev) +{ + cec_dev->dev.bus = &cec_bus_type; + dev_set_name(&cec_dev->dev, "cec%d", cec_device_count++); + cec_dev->dev.release = cec_device_release; + + return device_register(&cec_dev->dev); +} +EXPORT_SYMBOL(register_cec_device); + +/** + * unregister_cec_device() - unregister a cec device + * @cec_dev: cec_device pointer + */ +void unregister_cec_device(struct cec_device *cec_dev) +{ + device_unregister(&cec_dev->dev); +} +EXPORT_SYMBOL(unregister_cec_device); + +static int __init cec_init(void) +{ + int ret; + + ret = bus_register(&cec_bus_type); + if (ret) { + pr_err("unable to register cec bus type\n"); + return ret; + } + + ret = cec_dev_init(); + if (ret) { + pr_err("failed to create devices\n"); + goto out_bus; + } + + pr_info("bus registered\n"); + + return 0; + +out_bus: + bus_unregister(&cec_bus_type); + return ret; +} + +static void __exit cec_exit(void) +{ + cec_dev_exit(); + bus_unregister(&cec_bus_type); + pr_info("bus unregistered\n"); +} + +module_init(cec_init); +module_exit(cec_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("HDMI CEC core driver"); +MODULE_LICENSE("GPL"); diff -Nruw linux-3.2.13-fbx/drivers/misc/hdmi-cec./dev.c linux-3.2.13-fbx/drivers/misc/hdmi-cec/dev.c --- linux-3.2.13-fbx/drivers/misc/hdmi-cec./dev.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/hdmi-cec/dev.c 2013-06-13 15:06:40.170518376 +0200 @@ -0,0 +1,306 @@ +/* + * HDMI CEC character device code + * + * Copyright (C), 2011 Florian Fainelli + * + * This file is subject to the GPLv2 licensing terms + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static unsigned num_cec_devs; +static int cec_major; +static struct list_head cec_devs_list; +static DEFINE_SPINLOCK(cec_devs_list_lock); +static struct class *cec_class; + +static int cec_dev_open(struct inode *i, struct file *f) +{ + struct cdev *cdev = i->i_cdev; + struct cec_device *cec_dev = + container_of(cdev, struct cec_device, cdev); + struct cec_driver *driver = to_cec_driver(cec_dev->dev.driver); + + f->private_data = cec_dev; + + return cec_attach_host(driver); +} + +static int cec_dev_close(struct inode *i, struct file *f) +{ + struct cdev *cdev = i->i_cdev; + struct cec_device *cec_dev = + container_of(cdev, struct cec_device, cdev); + struct cec_driver *driver = to_cec_driver(cec_dev->dev.driver); + int ret; + + ret = cec_detach_host(driver); + + cec_flush_queues(driver); + + return ret; +} + +static long cec_dev_ioctl(struct file *f, unsigned int cmd, unsigned long arg) +{ + struct cec_device *cec_dev = f->private_data; + struct cec_driver *driver = to_cec_driver(cec_dev->dev.driver); + void __user *argp = (void __user *)arg; + int __user *p = argp; + int val, ret = -EFAULT; + struct cec_msg msg; + struct cec_counters cnt; + + switch (cmd) { + case CEC_SET_LOGICAL_ADDRESS: + if (get_user(val, p)) + return -EFAULT; + + ret = cec_set_logical_address(driver, (u8)val); + break; + + /* cecd compatibility ioctls, should use poll() + read() */ + case CEC_SEND_MESSAGE: + if (copy_from_user(&msg, argp, sizeof(msg))) + return -EFAULT; + + if (!msg.len) + return -EINVAL; + + ret = cec_send_message(driver, &msg); + break; + + /* cecd compatibility ioctls, should use poll() + read() */ + case CEC_RECV_MESSAGE: + if (copy_from_user(&msg, argp, sizeof(msg))) + return -EFAULT; + + if (msg.flags & CEC_MSG_NONBLOCK) + ret = cec_dequeue_message(driver, &msg); + else + ret = cec_read_message(driver, &msg); + + if (ret) + return ret; + + if (copy_to_user(argp, &msg, sizeof(msg))) + return -EFAULT; + + break; + + case CEC_RESET_DEVICE: + ret = cec_reset_device(driver); + break; + + case CEC_GET_COUNTERS: + memset(&cnt, 0, sizeof(cnt)); + + ret = cec_get_counters(driver, &cnt); + if (ret) + return ret; + + if (copy_to_user(argp, &cnt, sizeof(cnt))) + return -EFAULT; + + break; + + case CEC_SET_RX_MODE: + if (get_user(val, p)) + return -EFAULT; + + ret = cec_set_rx_mode(driver, (enum cec_rx_mode)val); + break; + + default: + dev_err(&cec_dev->dev, "unsupported ioctl: %08x\n", cmd); + break; + } + + return ret; +} + +static int cec_dev_write(struct file *f, const char __user *buf, + size_t count, loff_t *pos) +{ + struct cec_device *cec_dev = f->private_data; + struct cec_driver *driver = to_cec_driver(cec_dev->dev.driver); + struct cec_msg msg; + int ret; + + memset(&msg, 0, sizeof(msg)); + + if (count > CEC_MAX_MSG_LEN || !count) + return -EINVAL; + + if (copy_from_user(&msg.data, buf, count)) + return -EFAULT; + + msg.len = count; + + ret = cec_send_message(driver, &msg); + if (ret) + return ret; + + return count; +} + +static int cec_dev_read(struct file *f, char __user *buf, + size_t count, loff_t *pos) +{ + struct cec_device *cec_dev = f->private_data; + struct cec_driver *driver = to_cec_driver(cec_dev->dev.driver); + int ret; + struct cec_msg msg; + + ret = wait_event_interruptible(driver->rx_wait, + __cec_rx_queue_len(driver) != 0); + if (ret) + return ret; + + ret = cec_dequeue_message(driver, &msg); + if (ret) + return ret; + + if (copy_to_user(buf, &msg.data, msg.len)) + return -EFAULT; + + return msg.len; +} + +static unsigned int cec_dev_poll(struct file *f, poll_table *wait) +{ + struct cec_device *cec_dev = f->private_data; + struct cec_driver *driver = to_cec_driver(cec_dev->dev.driver); + + if (__cec_rx_queue_len(driver)) + return POLLIN | POLLRDNORM; + + poll_wait(f, &driver->rx_wait, wait); + + return 0; +} + +static const struct file_operations cec_dev_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = cec_dev_open, + .release = cec_dev_close, + .unlocked_ioctl = cec_dev_ioctl, + .read = cec_dev_read, + .write = cec_dev_write, + .poll = cec_dev_poll, +}; + +int cec_create_dev_node(struct cec_device *cec_dev) +{ + int ret; + dev_t devno; + + devno = MKDEV(cec_major, num_cec_devs); + + cdev_init(&cec_dev->cdev, &cec_dev_fops); + cec_dev->cdev.owner = THIS_MODULE; + cec_dev->minor = num_cec_devs; + cec_dev->major = cec_major; + + ret = cdev_add(&cec_dev->cdev, devno, 1); + if (ret) { + dev_err(&cec_dev->dev, "failed to add char device\n"); + return ret; + } + + cec_dev->class_dev = device_create(cec_class, NULL, devno, + cec_dev, cec_dev->name); + if (IS_ERR(cec_dev->class_dev)) { + ret = PTR_ERR(cec_dev->class_dev); + dev_err(&cec_dev->dev, "failed to create device\n"); + goto out_err; + } + + spin_lock(&cec_devs_list_lock); + list_add_tail(&cec_dev->list, &cec_devs_list); + num_cec_devs++; + spin_unlock(&cec_devs_list_lock); + + return 0; + +out_err: + cdev_del(&cec_dev->cdev); + return ret; +} + +static void cec_remove_one_device(unsigned minor) +{ + struct cec_device *cur, *n; + + list_for_each_entry_safe(cur, n, &cec_devs_list, list) { + if (cur->minor != minor) + continue; + + device_del(cur->class_dev); + cdev_del(&cur->cdev); + list_del(&cur->list); + } +} + +void cec_remove_dev_node(struct cec_device *cec_dev) +{ + cec_remove_one_device(cec_dev->minor); +} + +static void cec_cleanup_devs(void) +{ + unsigned i; + + for (i = 0; i < num_cec_devs; i++) + cec_remove_one_device(i); +} + +int __init cec_dev_init(void) +{ + dev_t dev = 0; + int ret; + + INIT_LIST_HEAD(&cec_devs_list); + + ret = alloc_chrdev_region(&dev, 0, CEC_MAX_DEVS, "cec"); + if (ret < 0) { + printk(KERN_ERR "alloc_chrdev_region() failed for cec\n"); + goto out; + } + + cec_major = MAJOR(dev); + + cec_class = class_create(THIS_MODULE, "cec"); + if (IS_ERR(cec_class)) { + printk(KERN_ERR "class_create failed\n"); + ret = PTR_ERR(cec_class); + goto out; + } + + return 0; + +out: + unregister_chrdev_region(MKDEV(cec_major, 0), CEC_MAX_DEVS); + return ret; +} + +void __exit cec_dev_exit(void) +{ + class_unregister(cec_class); + cec_cleanup_devs(); + + if (cec_major) + unregister_chrdev_region(MKDEV(cec_major, 0), CEC_MAX_DEVS); +} + diff -Nruw linux-3.2.13-fbx/drivers/misc/hdmi-cec./Kconfig linux-3.2.13-fbx/drivers/misc/hdmi-cec/Kconfig --- linux-3.2.13-fbx/drivers/misc/hdmi-cec./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/hdmi-cec/Kconfig 2013-06-13 15:06:40.166518378 +0200 @@ -0,0 +1,14 @@ +menu "HDMI CEC support" + +config HDMI_CEC + tristate "HDMI CEC (Consumer Electronics Control) support" + ---help--- + HDMI Consumer Electronics Control support. + +config HDMI_CEC_REMOTI + tristate "RemoTI CEC driver" + depends on HDMI_CEC + ---help--- + HDMI CEC driver using RemoTI IPCs. + +endmenu diff -Nruw linux-3.2.13-fbx/drivers/misc/hdmi-cec./Makefile linux-3.2.13-fbx/drivers/misc/hdmi-cec/Makefile --- linux-3.2.13-fbx/drivers/misc/hdmi-cec./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/hdmi-cec/Makefile 2012-07-27 18:10:45.080135814 +0200 @@ -0,0 +1,6 @@ +obj-$(CONFIG_HDMI_CEC) += hdmi-cec.o +hdmi-cec-objs += core.o dev.o + +# drivers +obj-$(CONFIG_HDMI_CEC_REMOTI) += remoti-cec.o +remoti-cec-objs := remoti.o diff -Nruw linux-3.2.13-fbx/drivers/misc/hdmi-cec./remoti.c linux-3.2.13-fbx/drivers/misc/hdmi-cec/remoti.c --- linux-3.2.13-fbx/drivers/misc/hdmi-cec./remoti.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/hdmi-cec/remoti.c 2013-06-13 15:06:40.170518376 +0200 @@ -0,0 +1,420 @@ +/* + * HDMI CEC driver using RemoTI IPCs + * + * Copyright (C) Florian Fainelli + * + * This file is subject to the GPLv2 licensing terms + */ + +#include +#include +#include +#include +#include + +#include + +/* HDMI CEC related commands */ +#define RTI_CEC_RECV_MSG_IND 0x20 +#define RTI_CEC_RECV_ERR_IND 0x22 + +#define RTI_CEC_SET_LADDR_REQ 0x24 +#define RTI_CEC_SET_LADDR_CNF 0x23 + +#define RTI_CEC_SEND_MSG_REQ 0x26 +#define RTI_CEC_SEND_MSG_CNF 0x25 + +#define RTI_CEC_GET_CNT_REQ 0x28 +#define RTI_CEC_GET_CNT_CNF 0x27 + +#define RTI_CEC_RST_REQ 0x2A +#define RTI_CEC_RST_CNF 0x29 + +#define RTI_CEC_RX_MODE_REQ 0x2C +#define RTI_CEC_RX_MODE_CNF 0x2B + +#define RTI_CEC_ATTACH_REQ 0x2E +#define RTI_CEC_ATTACH_CNF 0x2D + +#define RTI_CEC_DETACH_REQ 0x30 +#define RTI_CEC_DETACH_CNF 0x2F + +enum remoti_cec_errors { + REMOTI_CEC_SUCCESS = 0, + REMOTI_CEC_INVALID, + REMOTI_CEC_BUS_BUSY, + REMOTI_CEC_NAK, + REMOTI_CEC_INVALID_ADDR, + REMOTI_CEC_RX_ERROR, + REMOTI_CEC_BUS_ARB_LOSS, + REMOTI_CEC_MAX +}; + +static inline int remoti_cec_map_error(const u8 ret) +{ + switch (ret) { + case REMOTI_CEC_SUCCESS: + return 0; + default: + return -EINVAL; + case REMOTI_CEC_BUS_BUSY: + return -EBUSY; + case REMOTI_CEC_NAK: + return -EIO; + case REMOTI_CEC_BUS_ARB_LOSS: + return -EAGAIN; + } +} + +/* + * Driver private context + */ +struct remoti_cec_priv { + struct remoti_device *rf; + struct cec_driver *drv; +}; + +static int remoti_cec_send(struct cec_driver *drv, + const u8 *data, + const u8 len) +{ + struct remoti_msg msg; + struct remoti_cec_priv *priv = cec_driver_priv(drv); + int ret; + + memset(&msg, 0, sizeof(msg)); + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_CEC_SEND_MSG_REQ; + msg.len = len; + msg.data = (u8 *)data; + msg.flags = MSG_NO_STD_RESP; + + ret = remoti_send_frame(priv->rf, &msg); + if (ret) + return ret; + + return remoti_cec_map_error(msg.reply[0]); +} + +static int remoti_cec_recv_ind(struct remoti_device *rf, + const struct remoti_msg *msg, + void *data) +{ + struct remoti_cec_priv *priv; + + if (!msg->len || !data) + return -EINVAL; + + priv = data; + + /* send message to upper layers */ + return cec_receive_message(priv->drv, msg->data, msg->len); +} + +static int remoti_cec_set_logical_address(struct cec_driver *drv, + const u8 logical_address) +{ + struct remoti_cec_priv *priv = cec_driver_priv(drv); + struct remoti_msg msg; + int ret; + + memset(&msg, 0, sizeof(msg)); + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_CEC_SET_LADDR_REQ; + msg.len = sizeof(logical_address); + msg.data = (u8 *)&logical_address; + msg.flags = MSG_NO_STD_RESP; + + ret = remoti_send_frame(priv->rf, &msg); + if (ret) + return ret; + + return remoti_cec_map_error(msg.reply[0]); +} + +static int remoti_cec_get_counters(struct cec_driver *drv, + struct cec_counters *cnt) +{ + struct remoti_cec_priv *priv = cec_driver_priv(drv); + struct remoti_msg msg; + int ret; + + memset(&msg, 0, sizeof(msg)); + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_CEC_GET_CNT_REQ; + msg.flags = MSG_NO_STD_RESP; + + ret = remoti_send_frame(priv->rf, &msg); + if (ret) + return ret; + + memcpy(cnt, msg.reply, msg.len); + + return 0; +} + +static int remoti_cec_reset(struct cec_driver *drv) +{ + struct remoti_cec_priv *priv = cec_driver_priv(drv); + struct remoti_msg msg; + + memset(&msg, 0, sizeof(msg)); + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_CEC_RST_REQ; + msg.flags = MSG_STD_RESP; + + return remoti_send_frame(priv->rf, &msg); +} + +static int remoti_cec_set_rx_mode(struct cec_driver *drv, + enum cec_rx_mode mode) +{ + struct remoti_cec_priv *priv = cec_driver_priv(drv); + struct remoti_msg msg; + u8 rx_mode = (u8)mode; + int ret; + + memset(&msg, 0, sizeof(msg)); + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_CEC_RX_MODE_REQ; + msg.len = sizeof(rx_mode); + msg.data = &rx_mode; + msg.flags = MSG_NO_STD_RESP; + + ret = remoti_send_frame(priv->rf, &msg); + if (ret) + return ret; + + return remoti_cec_map_error(msg.reply[0]); +} + +static int remoti_cec_attach(struct cec_driver *drv) +{ + struct remoti_cec_priv *priv = cec_driver_priv(drv); + struct remoti_msg msg; + int ret; + + memset(&msg, 0, sizeof(msg)); + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_CEC_ATTACH_REQ; + msg.flags = MSG_NO_STD_RESP; + + ret = remoti_send_frame(priv->rf, &msg); + if (ret) + return ret; + + return remoti_cec_map_error(msg.reply[0]); +} + +static int remoti_cec_detach(struct cec_driver *drv) +{ + struct remoti_cec_priv *priv = cec_driver_priv(drv); + struct remoti_msg msg; + int ret; + + memset(&msg, 0, sizeof(msg)); + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_CEC_DETACH_REQ; + + ret = remoti_send_frame(priv->rf, &msg); + if (ret) + return ret; + + return remoti_cec_map_error(msg.reply[0]); +} + +static struct remoti_command remoti_cec_commands[] = { + { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_SEND_MSG_CNF, + .flags = MSG_STD_RESP, + .len = 1, + }, + .name = "cec_send", + }, { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_RECV_MSG_IND, + .flags = MSG_NO_STD_RESP, + }, + .cnf = remoti_cec_recv_ind, + .name = "cec_recv", + }, { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_SET_LADDR_CNF, + .flags = MSG_STD_RESP, + .len = 1, + }, + .name = "cec_logical_address", + }, { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_GET_CNT_CNF, + }, + .name = "cec_get_counters", + }, { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_RST_CNF, + }, + .name = "cec_reset", + }, { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_RX_MODE_CNF, + }, + .name = "cec_rx_mode", + }, { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_ATTACH_CNF, + }, + .name = "attach", + }, { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + .cmd = RTI_CEC_DETACH_CNF, + }, + .name = "detach", + }, +}; + +static struct cec_driver_ops remoti_cec_ops = { + .set_logical_address = remoti_cec_set_logical_address, + .send = remoti_cec_send, + .reset = remoti_cec_reset, + .get_counters = remoti_cec_get_counters, + .set_rx_mode = remoti_cec_set_rx_mode, + .attach = remoti_cec_attach, + .detach = remoti_cec_detach, +}; + +static struct cec_device remoti_cec_device = { + .name = "remoti-cec", +}; + +static int __devinit remoti_cec_probe(struct platform_device *pdev) +{ + int ret = 0; + struct remoti_cec_priv *priv; + struct cec_driver *driver; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (!driver) { + dev_err(&pdev->dev, "failed to allocate driver\n"); + ret = -ENOMEM; + goto out_free_priv; + } + + priv->rf = remoti_get_device(pdev->id); + if (!priv->rf) { + dev_err(&pdev->dev, "failed to get associated remoti dev\n"); + ret = -ENODEV; + goto out_free_driver; + } + + platform_set_drvdata(pdev, driver); + priv->drv = driver; + driver->priv = priv; + driver->name = "remoti-cec"; + driver->ops = &remoti_cec_ops; + driver->module = THIS_MODULE; + driver->flags |= CEC_HW_HAS_COUNTERS; + driver->flags |= CEC_HW_HAS_RX_FILTER; + + ret = register_cec_driver(driver); + if (ret) { + dev_err(&pdev->dev, "unable to register cec driver\n"); + goto out_free_driver; + } + + remoti_cec_commands[1].priv = priv; + + ret = register_cec_device(&remoti_cec_device); + if (ret) { + dev_err(&pdev->dev, "failed to register cec device\n"); + goto out; + } + + ret = remoti_register_commands(remoti_cec_commands, + ARRAY_SIZE(remoti_cec_commands)); + if (ret) { + dev_err(&pdev->dev, "unable to register remoti commands\n"); + goto out; + } + + dev_info(&pdev->dev, "registered RemoTI CEC driver\n"); + + return 0; + +out: + unregister_cec_driver(driver); +out_free_driver: + kfree(driver); +out_free_priv: + kfree(priv); + platform_set_drvdata(pdev, NULL); + return ret; +} + +static int __devexit remoti_cec_remove(struct platform_device *pdev) +{ + struct cec_driver *drv = platform_get_drvdata(pdev); + + remoti_unregister_commands(remoti_cec_commands, + ARRAY_SIZE(remoti_cec_commands)); + unregister_cec_device(&remoti_cec_device); + unregister_cec_driver(drv); + kfree(drv->priv); + kfree(drv); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct of_device_id remoti_cec_of_ids[] = { + { .compatible = "ti,remoti-cec" }, + { /* sentinel*/ }, +}; +MODULE_DEVICE_TABLE(of, remoti_cec_of_ids); + +static struct platform_driver remoti_cec_driver = { + .driver = { + .name = "remoti-cec", + .owner = THIS_MODULE, + .of_match_table = remoti_cec_of_ids, + }, + .probe = remoti_cec_probe, + .remove = __devexit_p(remoti_cec_remove), +}; + +module_platform_driver(remoti_cec_driver); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("CEC transport over RemoTI"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:remoti-cec"); --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/drivers/misc/pic16-pmu.c 2012-07-27 18:10:45.084135817 +0200 @@ -0,0 +1,700 @@ +/* + * PIC16F72x PMU / LED / button driver + * + * Copyright (C) 2010, Florian Fainelli + * + * This file is subject to the GPLv2 licensing terms + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PIC16_PMU_LED_COUNT 3 +#define PIC16_PMU_PWR_COUNT 3 +#define PIC16_PMU_BTN_COUNT 3 +#define PIC16_PMU_RST_COUNT 1 + +/* + * Per LED private structure + */ +struct pic16_pmu_led_data { + u8 id; + u8 status:1; + u8 blink:1; + struct led_classdev ldev; + struct i2c_client *client; + struct work_struct work; +}; + +struct pic16_pmu_input_data { + struct i2c_client *client; + struct input_polled_dev *poll_dev; + unsigned short keymap[PIC16_PMU_BTN_COUNT]; +}; + +static unsigned short default_map[PIC16_PMU_BTN_COUNT] = { + BTN_0, + BTN_1, + BTN_2, +}; + +/* + * Global device structure + */ +struct pic16_pmu_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + unsigned long last_updated; + struct i2c_client *client; + struct pic16_pmu_led_data leds[PIC16_PMU_LED_COUNT]; + struct pic16_pmu_input_data btns; + u8 model; + u8 revision; + u8 power; + u8 buttons; + u8 resets; + u8 hw_revision; + struct gpio_chip chip; +}; + +static const unsigned short normal_i2c[] = { 0x60, I2C_CLIENT_END }; + +static const struct i2c_device_id pic16_pmu_idtable[] = { + { "pic16-pmu", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, pic16_pmu_idtable); + +/* + * device registers + */ +#define PIC16_PMU_REG_DEV 0x00 +#define PIC16_PMU_16F722 0x22 + +#define PIC16_PMU_REG_REV 0x01 +#define PIC16_PMU_REG_LED 0x02 +#define PIC16_PMU_REG_PWR 0x03 +#define PIC16_PMU_REG_PWR_MSK 0x1f +#define PIC16_PMU_REG_BTN 0x04 +#define PIC16_PMU_REG_RST 0x05 +#define PIC16_PMU_REG_RST_MSK 0x05 +#define PIC16_PMU_REG_CTL 0x06 +#define PIC16_PMU_REG_BLINK 0x07 +#define PIC16_PMU_REG_HW_REV 0x08 + +#define PIC16_PMU_REFRESH (60 * HZ) /* 1 minute */ + +static inline int pic16_pmu_reg_read(struct i2c_client *client, u8 reg, u8 *value) +{ + int tmp; + + tmp = i2c_smbus_read_byte_data(client, reg); + if (tmp < 0) + tmp = i2c_smbus_read_byte_data(client, reg); + if (tmp < 0) + return -EINVAL; + + *value = tmp; + + return 0; +} + +static inline int pic16_pmu_reg_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static struct pic16_pmu_data *pic16_pmu_update(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pic16_pmu_data *data = i2c_get_clientdata(client); + u8 val; + int ret; + unsigned long local_jiffies = jiffies; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->last_updated + + PIC16_PMU_REFRESH)) + goto exit; + + ret = pic16_pmu_reg_read(client, PIC16_PMU_REG_DEV, &val); + if (ret) { + dev_err(&client->dev, "error reading device model\n"); + goto exit; + } + data->model = val; + + ret = pic16_pmu_reg_read(client, PIC16_PMU_REG_REV, &val); + if (ret) { + dev_err(&client->dev, "error reading revision\n"); + goto exit; + } + data->revision = val; + + ret = pic16_pmu_reg_read(client, PIC16_PMU_REG_PWR, &val); + if (ret) { + dev_err(&client->dev, "erorr reading power status\n"); + goto exit; + } + data->power = val; + + ret = pic16_pmu_reg_read(client, PIC16_PMU_REG_BTN, &val); + if (ret) { + dev_err(&client->dev, "error reading button status\n"); + goto exit; + } + data->buttons = val; + + ret = pic16_pmu_reg_read(client, PIC16_PMU_REG_RST, &val); + if (ret) { + dev_err(&client->dev, "error reading reset status\n"); + goto exit; + } + data->resets = val; + + ret = pic16_pmu_reg_read(client, PIC16_PMU_REG_HW_REV, &val); + if (ret) { + dev_err(&client->dev, "error reading hw revision\n"); + goto exit; + } + data->hw_revision = val; + + data->last_updated = local_jiffies; +exit: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_pwr(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pic16_pmu_data *data = pic16_pmu_update(dev); + int val; + + val = (((data->power & PIC16_PMU_REG_PWR_MSK) & + (1 << attr->index)) >> attr->index); + + return sprintf(buf, "%d\n", val); +} + +static ssize_t show_model(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct pic16_pmu_data *data = pic16_pmu_update(dev); + return sprintf(buf, "Microchip PIC16F%02x\n", data->model); +} + +static ssize_t show_revision(struct device *dev, + struct device_attribute *devattrr, + char *buf) +{ + struct pic16_pmu_data *data = pic16_pmu_update(dev); + return sprintf(buf, "%02x\n", data->revision); +} + +static ssize_t show_hw_revision(struct device *dev, + struct device_attribute *devattrr, + char *buf) +{ + struct pic16_pmu_data *data = pic16_pmu_update(dev); + return sprintf(buf, "%02x\n", data->hw_revision); +} + +static ssize_t show_rst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pic16_pmu_data *data = pic16_pmu_update(dev); + int val; + + val = (((data->resets & PIC16_PMU_REG_RST_MSK) & + (1 << attr->index)) >> attr->index); + + return sprintf(buf, "%d\n", val); +} + +static int pic16_pmu_set_reset(struct i2c_client *client, + struct pic16_pmu_data *data, + unsigned int index, long value) +{ + int ret; + u8 val = data->resets; + + if (value) + val |= (1 << index); + else + val &= ~(1 << index); + + data->resets = val; + + mutex_lock(&data->lock); + ret = pic16_pmu_reg_write(client, PIC16_PMU_REG_RST, val); + mutex_unlock(&data->lock); + + return ret; +} + +static ssize_t set_rst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pic16_pmu_data *data = pic16_pmu_update(dev); + struct i2c_client *client = to_i2c_client(dev); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + pic16_pmu_set_reset(client, data, attr->index, temp); + + return count; +} + +static ssize_t show_btn(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pic16_pmu_data *data = i2c_get_clientdata(client); + u8 val = 0; + int ret; + + mutex_lock(&data->lock); + ret = pic16_pmu_reg_read(client, PIC16_PMU_REG_BTN, &val); + if (ret) { + dev_err(&client->dev, "unable to read status\n"); + goto out_unlock; + } + + val = (val & (1 << attr->index)) >> attr->index; + +out_unlock: + mutex_unlock(&data->lock); + return sprintf(buf, "%u\n", 1 - val); +} + +/* + * Power attributes + */ +static SENSOR_DEVICE_ATTR(pwrgd_ps, S_IRUGO, show_pwr, NULL, 0); +static SENSOR_DEVICE_ATTR(vcc1p5_ddr_pg, S_IRUGO, show_pwr, NULL, 1); +static SENSOR_DEVICE_ATTR(vcc0p95_core_ok, S_IRUGO, show_pwr, NULL, 2); +static SENSOR_DEVICE_ATTR(power_state, S_IRUGO, show_pwr, NULL, 3); +static SENSOR_DEVICE_ATTR(standby_state, S_IRUGO, show_pwr, NULL, 4); + +/* + * Device revision attributes + */ +static SENSOR_DEVICE_ATTR(revision, S_IRUGO, show_revision, NULL, 0); +static SENSOR_DEVICE_ATTR(model, S_IRUGO, show_model, NULL, 0); +static SENSOR_DEVICE_ATTR(hw_revision, S_IRUGO, show_hw_revision, NULL, 0); + +/* + * Reset control attributes + */ +static SENSOR_DEVICE_ATTR(rf_rst, S_IWUSR | S_IRUGO, show_rst, set_rst, 0); +static SENSOR_DEVICE_ATTR(cold_rst, S_IWUSR | S_IRUGO, show_rst, set_rst, 1); +static SENSOR_DEVICE_ATTR(dvd_en, S_IWUSR | S_IRUGO, show_rst, set_rst, 2); + +/* + * Button attributes + */ +static SENSOR_DEVICE_ATTR(bank0_btn, S_IRUGO, show_btn, NULL, 0); +static SENSOR_DEVICE_ATTR(reset_btn, S_IRUGO, show_btn, NULL, 1); +static SENSOR_DEVICE_ATTR(power_btn, S_IRUGO, show_btn, NULL, 2); + +static struct attribute *pic16_pmu_attr[] = { + &sensor_dev_attr_pwrgd_ps.dev_attr.attr, + &sensor_dev_attr_vcc1p5_ddr_pg.dev_attr.attr, + &sensor_dev_attr_vcc0p95_core_ok.dev_attr.attr, + &sensor_dev_attr_power_state.dev_attr.attr, + &sensor_dev_attr_standby_state.dev_attr.attr, + &sensor_dev_attr_revision.dev_attr.attr, + &sensor_dev_attr_model.dev_attr.attr, + &sensor_dev_attr_rf_rst.dev_attr.attr, + &sensor_dev_attr_cold_rst.dev_attr.attr, + &sensor_dev_attr_dvd_en.dev_attr.attr, + &sensor_dev_attr_hw_revision.dev_attr.attr, + &sensor_dev_attr_bank0_btn.dev_attr.attr, + &sensor_dev_attr_reset_btn.dev_attr.attr, + &sensor_dev_attr_power_btn.dev_attr.attr, + NULL +}; + +static void pic16_pmu_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct pic16_pmu_led_data *led; + + led = container_of(led_cdev, struct pic16_pmu_led_data, ldev); + led->status = brightness; + schedule_work(&led->work); +} + +static int pic16_pmu_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct pic16_pmu_led_data *led; + + led = container_of(led_cdev, struct pic16_pmu_led_data, ldev); + led->blink = !led->blink; + schedule_work(&led->work); + + return 0; +} + +static int pic16_pmu_led_set(struct pic16_pmu_led_data *led, u8 status, u8 blink) +{ + struct pic16_pmu_data *data = i2c_get_clientdata(led->client); + int ret; + u8 val = 0; + + mutex_lock(&data->lock); + + ret = pic16_pmu_reg_read(led->client, PIC16_PMU_REG_BLINK, &val); + if( ret) { + dev_err(&led->client->dev, "error reading BLINK reg for %d\n", + led->id); + goto exit; + } + + if (blink) + val |= (1 << led->id); + else + val &= ~(1 << led->id); + + ret = pic16_pmu_reg_write(led->client, PIC16_PMU_REG_BLINK, val); + if (ret) { + dev_err(&led->client->dev, "error writing back to BLINK reg value" + " for %d\n", led->id); + goto exit; + } + + val = (1 << (led->id + 4)); + if (status) + val |= (1 << led->id); + + ret = pic16_pmu_reg_write(led->client, PIC16_PMU_REG_LED, val); + if (ret) { + dev_err(&led->client->dev, "error writing back to LED reg value" + " for %d\n", led->id); + goto exit; + } + +exit: + mutex_unlock(&data->lock); + + return ret; +} + +static void pic16_pmu_led_work(struct work_struct *work) +{ + struct pic16_pmu_led_data *led; + + led = container_of(work, struct pic16_pmu_led_data, work); + pic16_pmu_led_set(led, led->status, led->blink); +} + +static struct led_classdev pic16_pmu_leds[] = { + { .name = "power:red", }, + { .name = "power:blue", }, + { .name = "error:red",}, +}; + +static int pic16_pmu_led_configure(struct i2c_client *client) +{ + int i, err = 0; + struct pic16_pmu_data *data = i2c_get_clientdata(client); + u8 val; + + mutex_lock(&data->lock); + err = pic16_pmu_reg_read(client, PIC16_PMU_REG_LED, &val); + mutex_unlock(&data->lock); + + if (err) + return err; + + data->last_updated = jiffies - PIC16_PMU_REFRESH - 1; + + for (i = 0; i < PIC16_PMU_LED_COUNT; i++) { + struct pic16_pmu_led_data *led = &data->leds[i]; + + led->id = i; + led->client = client; + + led->status = val & (1 << i); + memcpy(&led->ldev, &pic16_pmu_leds[i], sizeof(struct led_classdev)); + + led->ldev.max_brightness = 1; + led->ldev.brightness_set = pic16_pmu_set_brightness; + led->ldev.blink_set = pic16_pmu_set_blink; + led->ldev.flags = LED_CORE_SUSPENDRESUME; + + INIT_WORK(&led->work, pic16_pmu_led_work); + err = led_classdev_register(&client->dev, &led->ldev); + if (err < 0) { + dev_err(&client->dev, "cannot register LED %s\n", + led->ldev.name); + goto exit; + } + } + + return err; +exit: + if (i > 0) { + for (i = i - 1; i >= 0; i--) { + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + } + } + return err; +} + +static int pic16_pmu_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int device, revision; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, PIC16_PMU_REG_DEV); + if (device != PIC16_PMU_16F722) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, PIC16_PMU_REG_REV); + dev_info(&client->dev, "device: PIC16F%02x rev: %02x\n", + device, revision); + + strlcpy(info->type, "pic16-pmu", I2C_NAME_SIZE); + + return 0; +} + +/* + * input callbacks + */ +static void pic16_pmu_input_poll(struct input_polled_dev *dev) +{ + struct pic16_pmu_input_data *priv = dev->private; + struct input_dev *input = dev->input; + struct pic16_pmu_data *data = i2c_get_clientdata(priv->client); + u8 val; + int ret, i; + + mutex_lock(&data->lock); + ret = pic16_pmu_reg_read(priv->client, PIC16_PMU_REG_BTN, &val); + if (ret) { + dev_err(&input->dev, "unable to read status\n"); + goto out_unlock; + } + + for (i = 0; i < PIC16_PMU_BTN_COUNT; i++) + input_report_key(input, priv->keymap[i], + (val & (1 << i)) ? 0 : 1); + input_sync(input); + +out_unlock: + mutex_unlock(&data->lock); +} + +/* + * gpiolib callbacks + */ +static void pic16_pmu_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct pic16_pmu_data *data; + + data = container_of(chip, struct pic16_pmu_data, chip); + + pic16_pmu_set_reset(data->client, data, offset, value); +} + +static int pic16_pmu_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct pic16_pmu_data *data; + + data = container_of(chip, struct pic16_pmu_data, chip); + + return data->resets & (1 << offset); +} + +static int pic16_pmu_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return 0; +} + +static int pic16_pmu_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return 0; +} + +static int __devinit pic16_pmu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pic16_pmu_data *data; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int err, i; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + data->client = client; + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + data->attrs.attrs = pic16_pmu_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + err = -ENOMEM; + goto exit_hwmon; + } + + data->btns.client = client; + data->btns.poll_dev = poll_dev; + memcpy(data->btns.keymap, default_map, sizeof(default_map)); + poll_dev->private = &data->btns; + poll_dev->poll = pic16_pmu_input_poll; + poll_dev->poll_interval = 200; /* ms */ + + input = poll_dev->input; + input->name = "pic16-pmu"; + input->phys = "pic16-pmu/input0"; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + input->keycode = data->btns.keymap; + input->keycodemax = ARRAY_SIZE(data->btns.keymap); + input->keycodesize = sizeof(unsigned short); + + set_bit(EV_KEY, input->evbit); + for (i = 0; i < ARRAY_SIZE(data->btns.keymap); i++) + set_bit(data->btns.keymap[i], input->keybit); + + err = input_register_polled_device(poll_dev); + if (err) + goto exit_input; + + /* + * update device on startup to provide consistent + * informations + */ + pic16_pmu_update(&client->dev); + + /* Register gpiochip driver */ + data->chip.label = "pic16-pmu"; + data->chip.set = pic16_pmu_gpio_set; + data->chip.get = pic16_pmu_gpio_get; + data->chip.direction_input = pic16_pmu_gpio_direction_input; + data->chip.direction_output = pic16_pmu_gpio_direction_output; + data->chip.base = 100; + data->chip.ngpio = PIC16_PMU_RST_COUNT; + + err = gpiochip_add(&data->chip); + if (err) + goto exit_input; + + return pic16_pmu_led_configure(client); + +exit_input: + input_free_polled_device(poll_dev); +exit_hwmon: + hwmon_device_unregister(data->hwmon_dev); +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int __devexit pic16_pmu_remove(struct i2c_client *client) +{ + int i; + struct pic16_pmu_data *data = i2c_get_clientdata(client); + + gpiochip_remove(&data->chip); + + for (i = 0; i < PIC16_PMU_LED_COUNT; i++) { + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + } + + input_unregister_polled_device(data->btns.poll_dev); + input_free_polled_device(data->btns.poll_dev); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static struct i2c_driver pic16_pmu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "pic16-pmu", + }, + .id_table = pic16_pmu_idtable, + .probe = pic16_pmu_probe, + .remove = __devexit_p(pic16_pmu_remove), + .detect = pic16_pmu_detect, +}; + +static int __init pic16_pmu_init(void) +{ + return i2c_add_driver(&pic16_pmu_driver); +} + +static void __exit pic16_pmu_exit(void) +{ + i2c_del_driver(&pic16_pmu_driver); +} + +module_init(pic16_pmu_init); +module_exit(pic16_pmu_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("PIC16F7xx PMU / LED i2c driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pic16-pmu"); diff -Nruw linux-3.2.13-fbx/drivers/misc/remoti./core.c linux-3.2.13-fbx/drivers/misc/remoti/core.c --- linux-3.2.13-fbx/drivers/misc/remoti./core.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/remoti/core.c 2013-06-13 15:06:40.174518374 +0200 @@ -0,0 +1,1074 @@ +/* + * Copyright (C) 2010 Florian Fainelli + * + * RemoTI core module driver. + * + * This file is subject to the GPLv2 licensing terms. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static int readback __read_mostly = 0; +module_param(readback, int, 0); +MODULE_PARM_DESC(readback, "Read back firmware image on loading (default: 0)"); + +/* List of known RemoTI commands */ +static DEFINE_SPINLOCK(remoti_cmd_list_lock); +static struct list_head remoti_cmd_list; + +/* List of remoti devices */ +static DEFINE_SPINLOCK(remoti_devs_list_lock); +static struct list_head remoti_devs_list; + +#define REMOTI_FW_NAME "rnp_cc2530.bin" +#define REMOTI_FW_MAX_SIZE ((256 - 2) * 1024) + +/* + * Message specific structures + */ + +#define SB_DATA_SIZE 64 + +struct rti_sb_write_req { + __le16 addr; + u8 data[SB_DATA_SIZE]; +} __packed; + +struct rti_sb_read_req { + __le16 addr; +} __packed; + +struct rti_sb_read_resp { + u8 status; + __le16 addr; + u8 data[SB_DATA_SIZE]; +} __packed; + +/* + * Array of commands this module supports + */ +static struct remoti_command remoti_core_commands[] = { + /* Serial bootloader requests */ + { + .msg = { + .type = NPI_POLL, + .subsys = NPI_SYS_BOOT, + .cmd = RTI_SB_HSK_REQ, + .flags = MSG_STD_RESP, + }, + .name = "sb_handshake", + }, + { + .msg = { + .type = NPI_POLL, + .subsys = NPI_SYS_BOOT, + .cmd = RTI_SB_WRITE_REQ, + .flags = MSG_STD_RESP, + }, + .name = "sb_write", + }, + { + .msg = { + .type = NPI_POLL, + .subsys = NPI_SYS_BOOT, + .cmd = RTI_SB_READ_REQ, + .len = sizeof(struct rti_sb_read_resp), + .flags = MSG_STD_RESP, + }, + .name = "sb_read", + .fixed = 1, + }, + { + .msg = { + .type = NPI_POLL, + .subsys = NPI_SYS_BOOT, + .cmd = RTI_SB_ENABLE_REQ, + .flags = MSG_STD_RESP, + }, + .name = "sb_enable", + }, +}; + +static struct remoti_command *remoti_find_cmd_by_name(const char *name, size_t len) +{ + struct remoti_command *cmd; + + list_for_each_entry(cmd, &remoti_cmd_list, cmd_list) { + if (!strncmp(cmd->name, name, len - 1)) + return cmd; + } + + return NULL; +} + +static struct remoti_command *find_sync_cmd(const struct remoti_msg *msg) +{ + struct remoti_command *elem; + + list_for_each_entry(elem, &remoti_cmd_list, cmd_list) { + if (msg->subsys == elem->msg.subsys && + msg->cmd == elem->msg.cmd) + return elem; + } + + return NULL; +} + +/* + * let's get relax on the matching here + * since a request command id can have a corresponding + * response id with a distance ranging from 0 to 2. + * + * The protocol is so intelligent, that we also need to check + * if the frame is expected to be of fixed length or variable lenght. + */ +static struct remoti_command *find_cmd_by_triplet(const struct remoti_msg *msg) +{ + struct remoti_command *elem; + + list_for_each_entry(elem, &remoti_cmd_list, cmd_list) { + if (msg->type == elem->msg.type && + msg->subsys == elem->msg.subsys && + (msg->cmd == (elem->msg.cmd | 0x80) || /* Serial bootloader */ + msg->cmd == (elem->msg.cmd) || + msg->cmd == (elem->msg.cmd - 1) || + msg->cmd == (elem->msg.cmd - 2) || + msg->cmd == (elem->msg.cmd)) && + ((elem->fixed && (msg->len == elem->msg.len)) || + (!elem->fixed && (msg->len >= elem->msg.len)))) + return elem; + } + + return NULL; +} + + +static void remoti_update_stats(struct remoti_transport *tsp, const u8 subsys) +{ + switch (subsys) { + case NPI_SYS_RCAF: + tsp->stats.rx_rcaf_packets++; + break; + case NPI_SYS_BOOT: + tsp->stats.rx_boot_packets++; + break; + case NPI_SYS_UTIL: + tsp->stats.rx_util_packets++; + break; + } +} + +int remoti_reload_firmware(struct remoti_device *rf) +{ + int ret; + struct remoti_msg msg; + + if (rf->state == RNP_STATE_FW_DOWNLOADING) + return -EBUSY; + + /* + * If we were already running with an image, erase the preamble + * so that the Serial bootloader will be waiting for a new + * image, watchdog kicks a reset after 250 msec. + */ + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_BOOT; + msg.cmd = RTI_SB_RELOAD; + msg.len = 0; + msg.data = NULL; + msg.flags = MSG_NO_RESP; + + ret = remoti_send_frame(rf, &msg); + if (ret) + return ret; + + cancel_delayed_work_sync(&rf->hw_firmware_work); + queue_delayed_work(rf->workqueue, &rf->hw_firmware_work, HZ / 2); + + return ret; +} + +static int remoti_reset_device(struct remoti_device *rf) +{ + int ret; + + ret = gpio_request(rf->pdata.reset_gpio, "remoti"); + if (ret) + return ret; + + gpio_set_value(rf->pdata.reset_gpio, 1); + msleep(10); + gpio_set_value(rf->pdata.reset_gpio, 0); + msleep(10); + + gpio_free(rf->pdata.reset_gpio); + + return 0; +} + +static int remoti_serial_boot_send_firmware(struct remoti_device *rf, + const struct firmware *fw) +{ + int ret; + int frame, num_frames; + u8 *p; + struct rti_sb_write_req wr_req; + struct rti_sb_read_req rd_req; + struct rti_sb_read_resp *rd_resp; + unsigned int max_retries = 10; + unsigned int progress; + u8 percent = 0; + struct remoti_msg msg; + + /* Round-up to the right number of frames */ + num_frames = DIV_ROUND_UP(fw->size, SB_DATA_SIZE); + progress = (num_frames * RTI_FW_PROGRESS_STEP) / 100; + + /* Send initial progress */ + remoti_mcast_msg(REMOTI_CMD_RNP_FW_PROGRESS, REMOTI_TYPE_U8, + &percent, sizeof(percent)); + + msg.type = NPI_POLL; + msg.subsys = NPI_SYS_BOOT; + msg.flags = MSG_STD_RESP; + + for (frame = 0; frame < num_frames; frame++) { +again: + p = (u8 *)(fw->data + (SB_DATA_SIZE * frame)); + wr_req.addr = cpu_to_le16(frame * (SB_DATA_SIZE / + RTI_SB_FLASH_WORD)); + memcpy(&wr_req.data, p, SB_DATA_SIZE); + + msg.cmd = RTI_SB_WRITE_REQ; + msg.len = sizeof(wr_req); + msg.data = (u8 *)&wr_req; + + ret = remoti_send_frame(rf, &msg); + if (ret) { + dev_err(&rf->pdev->dev, "write failed at frame: %d\n", + frame); + return -1; + } + + if (readback) { + rd_req.addr = cpu_to_le16(frame * (SB_DATA_SIZE / + RTI_SB_FLASH_WORD)); + msg.cmd = RTI_SB_READ_REQ; + msg.len = sizeof(rd_req); + msg.data = (u8 *)&rd_req; + + ret = remoti_send_frame(rf, &msg); + if (ret) { + dev_err(&rf->pdev->dev, "sent failed at frame: %d\n", + frame); + return -1; + } + + /* Compare read-back data */ + rd_resp = (struct rti_sb_read_resp *)msg.reply; + if (rd_resp->status != RTI_SUCCESS) { + dev_err(&rf->pdev->dev, + "reading failed at %d\n", frame); + return -1; + } + + if (rd_resp->addr != rd_req.addr) { + dev_err(&rf->pdev->dev, + "addr mismatch: 0x%04x (expected: 0x%04x)\n", + rd_resp->addr, rd_req.addr); + if (max_retries--) { + dev_info(&rf->pdev->dev, "retrying addr: 0x%04x\n", + rd_req.addr); + goto again; + } else { + dev_err(&rf->pdev->dev, "retry failed\n"); + return -1; + } + } + + if (memcmp(rd_resp->data, p, SB_DATA_SIZE)) { + dev_err(&rf->pdev->dev, "data mismatch at %d\n", frame); + if (max_retries--) { + dev_info(&rf->pdev->dev, "retrying\n"); + goto again; + } else { + dev_err(&rf->pdev->dev, "retry failed\n"); + return -1; + } + } + } + + max_retries = 10; + + if (!(frame % progress) && percent < 100) { + percent += RTI_FW_PROGRESS_STEP; + remoti_mcast_msg(REMOTI_CMD_RNP_FW_PROGRESS, REMOTI_TYPE_U8, + &percent, sizeof(percent)); + } + } + + percent = 100; + remoti_mcast_msg(REMOTI_CMD_RNP_FW_PROGRESS, REMOTI_TYPE_U8, + &percent, sizeof(percent)); + + return 0; +} + +/* Asynchronous firmware loading callback */ +static void remoti_serial_boot_load_firmware(const struct firmware *fw, + void *context) +{ + struct remoti_device *rf = context; + int ret = -1; + struct remoti_msg msg; + + mutex_lock(&rf->fw_mutex); + + if (!fw) { + dev_err(&rf->pdev->dev, "could not find %s\n", + REMOTI_FW_NAME); + goto out_failed; + } + + if (fw->size >= REMOTI_FW_MAX_SIZE) { + dev_err(&rf->pdev->dev, "invalid firmware size: %zd\n", + fw->size); + goto out_failed; + } + + rf->state = RNP_STATE_FW_DOWNLOADING; + remoti_mcast_msg(REMOTI_CMD_RNP_NEW_STATE, REMOTI_TYPE_U8, + &rf->state, sizeof(rf->state)); + + ret = remoti_serial_boot_send_firmware(rf, fw); + if (ret) { + dev_err(&rf->pdev->dev, "firmware sending failed\n"); + goto out_failed; + } + + /* Try to enable this image */ + msg.type = NPI_POLL; + msg.subsys = NPI_SYS_BOOT; + msg.cmd = RTI_SB_ENABLE_REQ; + msg.len = 0; + msg.data = NULL; + msg.flags = MSG_STD_RESP; + + ret = remoti_send_frame(rf, &msg); + if (ret) { + dev_err(&rf->pdev->dev, "failed to enable image: %d\n", ret); + goto out_failed; + } + + dev_info(&rf->pdev->dev, "firmware: loaded and enabled\n"); +out_failed: + rf->state = ret ? RNP_STATE_FW_FAILED : RNP_STATE_READY; + remoti_mcast_msg(REMOTI_CMD_RNP_NEW_STATE, REMOTI_TYPE_U8, + &rf->state, sizeof(rf->state)); + release_firmware(fw); + mutex_unlock(&rf->fw_mutex); +} + +static int remoti_boot_handshake(struct remoti_device *rf) +{ + struct remoti_msg msg; + + memset(&msg, 0, sizeof(msg)); + + msg.type = NPI_POLL; + msg.subsys = NPI_SYS_BOOT; + msg.cmd = RTI_SB_HSK_REQ; + msg.flags = MSG_STD_RESP; + + return remoti_send_frame(rf, &msg); +} + +static void remoti_serial_boot(struct work_struct *work) +{ + struct remoti_device *rf = + container_of(work, struct remoti_device, hw_firmware_work.work); + int ret; + + ret = remoti_boot_handshake(rf); + if (ret) { + rf->state = RNP_STATE_FW_FAILED; + remoti_mcast_msg(REMOTI_CMD_RNP_NEW_STATE, REMOTI_TYPE_U8, + &rf->state, sizeof(rf->state)); + return; + } + + request_firmware_nowait(THIS_MODULE, 1, REMOTI_FW_NAME, + &rf->pdev->dev, GFP_KERNEL, + rf, remoti_serial_boot_load_firmware); +} + +/* + * Reset the RNP and wait for the + * initialization callback to complete. + */ +static void remoti_rnp_hw_init_work(struct work_struct *work) +{ + struct remoti_device *rf = + container_of(work, struct remoti_device, hw_init_work.work); + unsigned int timeout = 100; + + /* Do not restart initialization twice */ + if (rf->state == RNP_STATE_READY) { + remoti_mcast_msg(REMOTI_CMD_RNP_NEW_STATE, REMOTI_TYPE_U8, + &rf->state, sizeof(rf->state)); + return; + } + + remoti_reset_device(rf); + + while (timeout) { + if (rf->tsp->check_wakeup && rf->tsp->check_wakeup(rf->tsp)) + break; + msleep(20); + timeout--; + } + + if (!timeout) { + dev_err(&rf->pdev->dev, "timeout waiting for RNP to boot\n"); + rf->state = RNP_STATE_FW_FAILED; + remoti_mcast_msg(REMOTI_CMD_RNP_NEW_STATE, REMOTI_TYPE_U8, + &rf->state, sizeof(rf->state)); + return; + } + + rf->state = RNP_STATE_READY; + remoti_mcast_msg(REMOTI_CMD_RNP_NEW_STATE, REMOTI_TYPE_U8, + &rf->state, sizeof(rf->state)); + dev_info(&rf->pdev->dev, "RNP ready\n"); +} + +static inline bool reply_is_valid(const struct remoti_msg *msg, + const struct remoti_msg *reply) +{ + if (((msg->type == NPI_SREQ && reply->type == NPI_SRSP) || + (msg->type == reply->type)) && + (msg->subsys == reply->subsys)) + return true; + + return false; +} + +/* + * Rx callback + */ +static void remoti_rx_work(struct remoti_device *rf, + const struct remoti_msg *reply) +{ + struct remoti_rnp_msg *pending; + struct remoti_msg *msg; + + spin_lock(&rf->tx_msg_list_lock); + + if (list_empty(&rf->tx_msg_list)) + goto out_exit; + + pending = list_entry(rf->tx_msg_list.next, + struct remoti_rnp_msg, next); + if (pending->status != MSG_SENT) + goto out_exit; + + msg = pending->msg; + + if (!reply_is_valid(msg, reply)) { + dev_dbg(&rf->pdev->dev, "spurious rx msg answer: " + "answer (%02x, %02x, %02x) " + "request (%02x, %02x, %02x)\n", + reply->type, reply->subsys, reply->cmd, + msg->type, msg->subsys, msg->cmd); + goto out_exit; + } + + pending->msg->len = reply->len; + memcpy(pending->msg->reply, reply->data, reply->len); + pending->status = MSG_COMPLETED; + list_del(&pending->next); + complete(&pending->completion); + +out_exit: + spin_unlock(&rf->tx_msg_list_lock); + return; +} + +/* + * Tx workqueue callback + */ +static void remoti_tx_work(struct work_struct *work) +{ + struct remoti_device *rf; + struct remoti_rnp_msg *pending; + + rf = container_of(work, struct remoti_device, tx_work); + + spin_lock(&rf->tx_msg_list_lock); + + if (list_empty(&rf->tx_msg_list)) + goto out_exit; + + pending = list_entry(rf->tx_msg_list.next, + struct remoti_rnp_msg, next); + if (pending->status != MSG_QUEUED) + goto out_exit; + + pending->status = MSG_SENT; + memset(pending->msg->reply, 0, sizeof(pending->msg->reply)); + + rf->tsp->send(rf->tsp, pending->msg); + +out_exit: + spin_unlock(&rf->tx_msg_list_lock); + return; +} + +#ifdef CONFIG_PM +static int remoti_suspend(struct device *dev) +{ + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + struct remoti_device *rf = platform_get_drvdata(pdev); + u8 mode = 1; + struct remoti_msg msg; + + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_RCAF; + msg.cmd = RTI_STANDBY_REQ; + msg.len = sizeof(mode); + msg.data = &mode; + msg.flags = MSG_STD_RESP; + + return remoti_send_frame(rf, &msg); +} + +static int remoti_resume(struct device *dev) +{ + struct platform_device *pdev = + container_of(dev, struct platform_device, dev); + struct remoti_device *rf = platform_get_drvdata(pdev); + u8 mode = 0; + struct remoti_msg msg; + + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_RCAF; + msg.cmd = RTI_STANDBY_REQ; + msg.len = sizeof(mode); + msg.data = &mode; + msg.flags = MSG_STD_RESP; + + return remoti_send_frame(rf, &msg); +} + +static int remoti_restore(struct device *dev) +{ + return 0; +} + +static struct dev_pm_ops remoti_pm_ops = { + .suspend = remoti_suspend, + .resume = remoti_resume, + .freeze = remoti_suspend, + .thaw = remoti_resume, + .restore = remoti_restore, +}; + +#define REMOTI_PM_OPS (&remoti_pm_ops) + +static int remoti_legacy_suspend(struct platform_device *pdev, + pm_message_t state) +{ + return remoti_suspend(&pdev->dev); +} + +static int remoti_legacy_resume(struct platform_device *pdev) +{ + return remoti_resume(&pdev->dev); +} +#else +#define REMOTI_PM_OPS NULL +#define remoti_legacy_suspend NULL +#define remoti_legacy_resume NULL +#endif + +/* + * Exported API + */ + +int remoti_register_command(struct remoti_command *cmd) +{ + int ret = 0; + struct remoti_command *tmp; + + spin_lock(&remoti_cmd_list_lock); + INIT_LIST_HEAD(&cmd->cmd_list); + tmp = remoti_find_cmd_by_name(cmd->name, strlen(cmd->name)); + if (tmp) { + ret = -EEXIST; + goto out; + } + + list_add_tail(&cmd->cmd_list, &remoti_cmd_list); +out: + spin_unlock(&remoti_cmd_list_lock); + + return ret; +} +EXPORT_SYMBOL(remoti_register_command); + +int remoti_register_commands(struct remoti_command *cmd, const size_t size) +{ + unsigned int i, ret; + + for (i = 0; i < size; i++) { + ret = remoti_register_command(&cmd[i]); + if (ret) + goto out; + } + + return 0; +out: + if (i > 0) + for (i = i - 1; i >= 0; i--) + remoti_unregister_command(&cmd[i]); + return -1; +} +EXPORT_SYMBOL(remoti_register_commands); + +void remoti_unregister_command(struct remoti_command *cmd) +{ + struct remoti_command *tmp; + + spin_lock(&remoti_cmd_list_lock); + tmp = remoti_find_cmd_by_name(cmd->name, strlen(cmd->name)); + if (!tmp) + goto out; + + list_del(&cmd->cmd_list); +out: + spin_unlock(&remoti_cmd_list_lock); +} +EXPORT_SYMBOL(remoti_unregister_command); + +void remoti_unregister_commands(struct remoti_command *cmd, const size_t size) +{ + unsigned int i; + + for (i = 0; i < size; i++) + remoti_unregister_command(&cmd[i]); +} +EXPORT_SYMBOL(remoti_unregister_commands); + + +/* + * Do some sanity checking on the received frame and update + * appropriate counters accordingly. + */ +int remoti_check_frame(struct remoti_transport *tsp, + const u8 *buf, const u8 len) +{ + struct remoti_device *rf = tsp->rf; + struct rti_hdr *hdr = (struct rti_hdr *)buf; + u8 type; + u8 subsys; + + /* check frame length */ + if (hdr->len > (len - sizeof(*hdr)) + || hdr->len > NPI_MAX_MSG_LEN) { + dev_dbg(&rf->pdev->dev, + "invalid payload lenght: %d (rx_count: %d)", + hdr->len, len); + tsp->stats.rx_len_errors++; + return -EINVAL; + } + + /* check this is a handled subsystem */ + subsys = (hdr->subsys) & NPI_SYS_MASK; + if (subsys >= NPI_SYS_MAX) { + dev_dbg(&rf->pdev->dev, "invalid subsys: %02x\n", subsys); + tsp->stats.rx_subsys_errors++; + return -EINVAL; + } + + /* and type */ + type = (hdr->subsys >> NPI_TYPE_SHIFT) & NPI_TYPE_MASK; + if (type > NPI_TYPE_MASK) { + dev_dbg(&rf->pdev->dev, "invalid type: %02x\n", type); + tsp->stats.rx_type_errors++; + return -EINVAL; + } + + remoti_update_stats(tsp, subsys); + + return 0; +} +EXPORT_SYMBOL(remoti_check_frame); + +int remoti_receive_frame(struct remoti_transport *tsp, + const u8 *buf, const u8 len) +{ + struct remoti_device *rf = tsp->rf; + struct rti_hdr *hdr = (struct rti_hdr *)buf; + struct remoti_command *cmd = NULL; + struct remoti_msg msg; + + msg.subsys = (hdr->subsys) & NPI_SYS_MASK; + msg.type = (hdr->subsys >> NPI_TYPE_SHIFT) & NPI_TYPE_MASK; + msg.cmd = hdr->cmd; + msg.len = len - RTI_HDR_SIZE; + msg.data = (u8 *)(buf + RTI_HDR_SIZE); + + if (rf->state != RNP_STATE_READY && msg.subsys != NPI_SYS_BOOT) + return -EPERM; + + /* execute the callback for the frame */ + switch (msg.type) { + case NPI_SRSP: + cmd = find_sync_cmd(&msg); + break; + default: + cmd = find_cmd_by_triplet(&msg); + break; + } + + if (!cmd) { + dev_dbg(&rf->pdev->dev, "no callback: subsys: %02x, " + "type: %02x, id: %02x\n", + msg.subsys, msg.type, msg.cmd); + tsp->stats.rx_no_callback++; + } + + if (hdr->len && cmd && cmd->cnf) { + dev_dbg(&rf->pdev->dev, "calling: %s\n", cmd->name); + cmd->cnf(rf, &msg, cmd->priv); + } + + remoti_rx_work(rf, &msg); + + return 0; +} +EXPORT_SYMBOL(remoti_receive_frame); + +int remoti_transport_register(struct remoti_transport *tsp) +{ + int ret = 0; + struct remoti_device *rf = remoti_get_device(tsp->id); + + if (!rf) { + pr_err("failed to register transport\n"); + return -ENODEV; + } + + spin_lock(&rf->lock); + if (rf->tsp) { + ret = -EBUSY; + goto out; + } + rf->tsp = tsp; + tsp->rf = rf; +out: + spin_unlock(&rf->lock); + dev_info(&rf->pdev->dev, "registered %s transport\n", tsp->name); + + return ret; +} +EXPORT_SYMBOL(remoti_transport_register); + +void remoti_transport_unregister(struct remoti_transport *tsp) +{ + struct remoti_device *rf = tsp->rf; + + spin_lock(&rf->lock); + rf->state = RNP_STATE_UNSPEC; + cancel_work_sync(&rf->tx_work); + cancel_delayed_work_sync(&rf->hw_firmware_work); + cancel_delayed_work_sync(&rf->hw_init_work); + rf->tsp = NULL; + spin_unlock(&rf->lock); + + dev_info(&rf->pdev->dev, "unregistered %s transport\n", tsp->name); +} +EXPORT_SYMBOL(remoti_transport_unregister); + +int remoti_send_frame(struct remoti_device *rf, struct remoti_msg *msg) +{ + int ret = 0; + unsigned int timeout = 0; + unsigned long cmd_timeout = 0; + struct remoti_rnp_msg *rmsg; + + /* RNP is not ready yet, we are booting it */ + if (rf->state != RNP_STATE_READY && msg->subsys != NPI_SYS_BOOT) + return -EPERM; + + rmsg = kzalloc(sizeof(*rmsg), GFP_KERNEL); + if (!rmsg) + return -ENOMEM; + + rmsg->msg = msg; + init_completion(&rmsg->completion); + + spin_lock(&rf->tx_msg_list_lock); + list_add_tail(&rmsg->next, &rf->tx_msg_list); + spin_unlock(&rf->tx_msg_list_lock); + + if (msg->flags) + cmd_timeout = HZ * 2; + + schedule_work(&rf->tx_work); + + timeout = wait_for_completion_timeout(&rmsg->completion, + cmd_timeout); + spin_lock(&rf->tx_msg_list_lock); + if (rmsg->status != MSG_COMPLETED) { + if (!timeout && cmd_timeout) + ret = -ETIMEDOUT; + else if (cmd_timeout) + ret = -EIO; + else + ret = 0; + goto out_exit; + } + + if (rmsg->msg->flags == MSG_STD_RESP) + ret = remoti_map_error(rmsg->msg->reply[0]); + else + ret = 0; + + spin_unlock(&rf->tx_msg_list_lock); + + kfree(rmsg); + + return ret; + +out_exit: + list_del(&rmsg->next); + kfree(rmsg); + spin_unlock(&rf->tx_msg_list_lock); + + return ret; + +} +EXPORT_SYMBOL(remoti_send_frame); + +static struct remoti_device *remoti_find_device_by_id(int id) +{ + struct remoti_device *rf = NULL; + + spin_lock(&remoti_devs_list_lock); + if (list_empty(&remoti_devs_list)) + goto out; + + list_for_each_entry(rf, &remoti_devs_list, dev_list) { + if (rf->pdev->id == id) + goto out; + } +out: + spin_unlock(&remoti_devs_list_lock); + return rf; +} + +struct remoti_device *remoti_get_device(int id) +{ + return remoti_find_device_by_id(id); +} +EXPORT_SYMBOL(remoti_get_device); + +static int remoti_probe(struct platform_device *pdev) +{ + int err; + struct remoti_platform_data *pdata __maybe_unused; + struct remoti_device *rf; + const unsigned int *gpio_prop __maybe_unused; + int proplen __maybe_unused; + + rf = kzalloc(sizeof(struct remoti_device), GFP_KERNEL); + if (!rf) { + dev_err(&pdev->dev, "unable to allocate memory\n"); + return -ENOMEM; + } + + spin_lock_init(&rf->lock); + mutex_init(&rf->fw_mutex); + +#ifndef CONFIG_OF + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "unable to get pdata\n"); + err = -ENODEV; + goto out_free; + } + + rf->pdata.reset_gpio = pdata->reset_gpio; + rf->pdata.reset_polarity = pdata->reset_polarity; +#else + gpio_prop = of_get_property(pdev->dev.of_node, "reset-gpio", &proplen); + if (!gpio_prop || proplen < 8) { + dev_err(&pdev->dev, "unable to get reset-gpio property\n"); + err = -ENODEV; + goto out_free; + } + + rf->pdata.reset_gpio = be32_to_cpup(gpio_prop); + rf->pdata.reset_polarity = be32_to_cpup(gpio_prop + 1); +#endif + + rf->workqueue = create_singlethread_workqueue("remoti"); + if (!rf->workqueue) { + dev_err(&pdev->dev, "unable to create workqueue\n"); + err = -ENOMEM; + goto out_free; + } + + INIT_DELAYED_WORK(&rf->hw_init_work, remoti_rnp_hw_init_work); + INIT_DELAYED_WORK(&rf->hw_firmware_work, remoti_serial_boot); + INIT_WORK(&rf->tx_work, remoti_tx_work); + + rf->pdev = pdev; + + INIT_LIST_HEAD(&rf->tx_msg_list); + spin_lock_init(&rf->tx_msg_list_lock); + + platform_set_drvdata(pdev, rf); + + spin_lock(&remoti_devs_list_lock); + list_add_tail(&rf->dev_list, &remoti_devs_list); + spin_unlock(&remoti_devs_list_lock); + + return 0; + +out_free: + kfree(rf); + + return err; +} + +static int __devexit remoti_remove(struct platform_device *pdev) +{ + struct remoti_device *rf = platform_get_drvdata(pdev); + int err = 0; + + spin_lock(&remoti_devs_list_lock); + list_del(&rf->dev_list); + spin_unlock(&remoti_devs_list_lock); + + cancel_work_sync(&rf->tx_work); + cancel_delayed_work_sync(&rf->hw_firmware_work); + cancel_delayed_work_sync(&rf->hw_init_work); + + if (rf->tsp) + remoti_transport_unregister(rf->tsp); + + if (rf->workqueue) + destroy_workqueue(rf->workqueue); + + kfree(rf); + platform_set_drvdata(pdev, NULL); + + return err; +} + +static const struct of_device_id remoti_of_ids[] = { + { .compatible = "ti,remoti" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, remoti_of_ids); + +static struct platform_driver remoti_driver = { + .driver = { + .name = "remoti", + .owner = THIS_MODULE, + .pm = REMOTI_PM_OPS, + .of_match_table = remoti_of_ids, + }, + .probe = remoti_probe, + .remove = __devexit_p(remoti_remove), + .resume = remoti_legacy_resume, + .suspend = remoti_legacy_suspend, +}; + +static int __init remoti_init(void) +{ + int ret; + + INIT_LIST_HEAD(&remoti_cmd_list); + INIT_LIST_HEAD(&remoti_devs_list); + + ret = remoti_netlink_register(); + if (ret) { + pr_err("failed to register netlink interface\n"); + return ret; + } + + ret = remoti_register_commands(remoti_core_commands, + ARRAY_SIZE(remoti_core_commands)); + if (ret) { + pr_err("failed to register core commands\n"); + goto out; + } + + ret = remoti_pairing_init(); + if (ret) + { + pr_err("failed to register pairing commands\n"); + goto out_commands; + } + + ret = platform_driver_register(&remoti_driver); + if (ret) { + pr_err("failed to register platform driver\n"); + goto out_pairing; + } + + pr_info("registered RemoTI core"); + + return 0; + +out_pairing: + remoti_pairing_exit(); +out_commands: + remoti_unregister_commands(remoti_core_commands, + ARRAY_SIZE(remoti_core_commands)); +out: + remoti_netlink_unregister(); + return ret; +} + +static void __exit remoti_exit(void) +{ + remoti_pairing_exit(); + remoti_unregister_commands(remoti_core_commands, + ARRAY_SIZE(remoti_core_commands)); + remoti_netlink_unregister(); + platform_driver_unregister(&remoti_driver); + pr_info("unregister RemoTI core"); +} + +module_init(remoti_init); +module_exit(remoti_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("RemoTI UART driver"); +MODULE_ALIAS("platform:remoti"); +MODULE_FIRMWARE(REMOTI_FW_NAME); diff -Nruw linux-3.2.13-fbx/drivers/misc/remoti./Kconfig linux-3.2.13-fbx/drivers/misc/remoti/Kconfig --- linux-3.2.13-fbx/drivers/misc/remoti./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/remoti/Kconfig 2013-06-13 15:06:40.174518374 +0200 @@ -0,0 +1,29 @@ +menu "RemoTI support" + +config REMOTI + tristate "RemoTI support" + depends on FBX6HD + ---help--- + Texas Instruments RemoTI stack. + +config REMOTI_UART + tristate "RemoTI UART transport" + depends on REMOTI + depends on SERIAL_CORE + ---help--- + RemoTI UART transport. + +config REMOTI_LEDS + tristate "RemoTI LEDS support" + depends on REMOTI + depends on LEDS_CLASS + ---help--- + RemoTI LEDS class driver support. + +config REMOTI_GPIO + tristate "RemoTI gpio support" + depends on REMOTI + ---help--- + gpiochip driver for the RemoTI RNP + +endmenu diff -Nruw linux-3.2.13-fbx/drivers/misc/remoti./leds.c linux-3.2.13-fbx/drivers/misc/remoti/leds.c --- linux-3.2.13-fbx/drivers/misc/remoti./leds.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/remoti/leds.c 2013-06-13 15:06:40.178518372 +0200 @@ -0,0 +1,231 @@ +/* + * LEDs support over RemoTI IPCs + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PFX KBUILD_MODNAME ": " + +/* + * Util RPCs + */ +#define RTI_LEDS_SET 0x0D +#define RTI_LEDS_MODE_MAX 0x08 + +struct remoti_led_data { + u8 id; + u8 status; + struct work_struct work; + struct led_classdev ldev; + struct remoti_device *rf; + struct platform_device *pdev; +}; + +/* + * LED stuff + */ +static void remoti_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct remoti_led_data *led; + + led = container_of(led_cdev, struct remoti_led_data, ldev); + led->status = brightness; + schedule_work(&led->work); +} + +/* + * We support hardware blinking and flashing + */ +static int remoti_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct remoti_led_data *led; + + led = container_of(led_cdev, struct remoti_led_data, ldev); + led->status = 0x04; + schedule_work(&led->work); + + return 0; +} + +static int remoti_led_set(struct remoti_led_data *led, u8 status) +{ + struct remoti_msg msg; + u8 data[2]; + + data[0] = led->id; + data[1] = status; + + msg.type = NPI_AREQ; + msg.subsys = NPI_SYS_UTIL; + msg.cmd = RTI_LEDS_SET; + msg.len = sizeof(data); + msg.data = data; + msg.flags = MSG_NO_RESP; + + return remoti_send_frame(led->rf, &msg); +} + +static void remoti_led_work(struct work_struct *work) +{ + struct remoti_led_data *led; + + led = container_of(work, struct remoti_led_data, work); + remoti_led_set(led, led->status); +} + +static int __devinit remoti_leds_probe(struct platform_device *pdev) +{ + struct remoti_leds_pdata *pdata __maybe_unused; + struct device_node *child __maybe_unused; + struct remoti_led_data *leds_data; + const char *leds_name[REMOTI_LEDS_COUNT]; + unsigned int num_leds = 0; + int err; + int i; + +#ifndef CONFIG_OF + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data available\n"); + return -ENODEV; + } + + num_leds = pdata->num_leds; + leds_name = pdata->names; +#else + for_each_child_of_node(pdev->dev.of_node, child) { + leds_name[num_leds] = of_get_property(child, "label", NULL); + if (!leds_name[num_leds]) + continue; + num_leds++; + }; +#endif + leds_data = kzalloc(num_leds * sizeof(*leds_data), GFP_KERNEL); + if (!leds_data) { + dev_err(&pdev->dev, "no memory for leds\n"); + return -ENOMEM; + } + + for (i = 0; i < num_leds; i++) { + struct remoti_led_data *led = &leds_data[i]; + + led->rf = remoti_get_device(pdev->id); + if (!led->rf) { + dev_err(&pdev->dev, "no associated remoti device\n"); + err = -ENODEV; + goto exit; + } + + led->pdev = pdev; + led->id = i; + led->status = 0; + memset(&led->ldev, 0, sizeof(led->ldev)); + led->ldev.name = leds_name[i]; + led->ldev.max_brightness = 1; + led->ldev.brightness_set = remoti_set_brightness; + led->ldev.blink_set = remoti_set_blink; + led->ldev.flags = LED_CORE_SUSPENDRESUME; + INIT_WORK(&led->work, remoti_led_work); + err = led_classdev_register(&pdev->dev, &led->ldev); + if (err) { + dev_err(&pdev->dev, "cannot register LED: %s\n", + led->ldev.name); + goto exit; + } + } + + platform_set_drvdata(pdev, leds_data); + dev_info(&pdev->dev, "registered %d LEDs\n", num_leds); + + return err; +exit: + if (i > 0) { + for (i = i - 1; i >= 0; i++) { + cancel_work_sync(&leds_data[i].work); + led_classdev_unregister(&leds_data[i].ldev); + } + } + + kfree(leds_data); + return err; +} + +static int remoti_leds_remove(struct platform_device *pdev) +{ + struct remoti_led_data *leds_data = + platform_get_drvdata(pdev); + struct remoti_leds_pdata *pdata = pdev->dev.platform_data; + int i; + + for (i = 0; i < pdata->num_leds; i++) { + cancel_work_sync(&leds_data[i].work); + led_classdev_unregister(&leds_data[i].ldev); + } + + kfree(leds_data); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct remoti_command remoti_led_command = { + .msg = { + .cmd = RTI_LEDS_SET, + .type = NPI_AREQ, + .subsys = NPI_SYS_UTIL, + }, + .name = "leds_set", +}; + +static struct of_device_id remoti_leds_of_ids[] = { + { .compatible = "ti,remoti-leds" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, remoti_leds_of_ids); + +static struct platform_driver remoti_leds_driver = { + .driver = { + .name = "remoti-leds", + .owner = THIS_MODULE, + .of_match_table = remoti_leds_of_ids, + }, + .probe = remoti_leds_probe, + .remove = __devexit_p(remoti_leds_remove), +}; + +static int __init remoti_leds_init(void) +{ + int ret; + + ret = remoti_register_command(&remoti_led_command); + if (ret) { + printk(KERN_ERR PFX "failed to register remoti command\n"); + return ret; + } + + return platform_driver_register(&remoti_leds_driver); +} + +static void __exit remoti_leds_exit(void) +{ + platform_driver_unregister(&remoti_leds_driver); + remoti_unregister_command(&remoti_led_command); +} + +module_init(remoti_leds_init); +module_exit(remoti_leds_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("RemoTI LEDS class support"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:remoti-leds"); diff -Nruw linux-3.2.13-fbx/drivers/misc/remoti./Makefile linux-3.2.13-fbx/drivers/misc/remoti/Makefile --- linux-3.2.13-fbx/drivers/misc/remoti./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/remoti/Makefile 2013-06-13 15:06:40.174518374 +0200 @@ -0,0 +1,9 @@ +obj-$(CONFIG_REMOTI) += remoti.o +obj-$(CONFIG_REMOTI_UART) += remoti-uart.o +obj-$(CONFIG_REMOTI_GPIO) += remoti-gpio.o +obj-$(CONFIG_REMOTI_LEDS) += remoti-leds.o + +remoti-objs := core.o netlink.o pairing.o +remoti-uart-objs := uart.o +remoti-gpio-objs := gpio.o +remoti-leds-objs := leds.o diff -Nruw linux-3.2.13-fbx/drivers/misc/remoti./netlink.c linux-3.2.13-fbx/drivers/misc/remoti/netlink.c --- linux-3.2.13-fbx/drivers/misc/remoti./netlink.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/remoti/netlink.c 2013-06-13 15:06:40.178518372 +0200 @@ -0,0 +1,333 @@ +/* + * RemoTI Netlink interface + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +struct remoti_val { + int len; + union { + u8 u; + unsigned int i; + const char *s; + struct remoti_stats stats; + struct remoti_msg msg; + } value; +}; + +static const struct nla_policy remoti_policy[REMOTI_ATTR_RNP_MAX + 1] = { + [REMOTI_ATTR_RNP_STATE] = { .type = NLA_U8 }, + [REMOTI_ATTR_RNP_CMD_FW] = { .type = NLA_U8 }, + [REMOTI_ATTR_RNP_TRANSPORT] = { .type = NLA_NUL_STRING }, + [REMOTI_ATTR_RNP_ID] = { .type = NLA_U8 }, +}; + +static struct genl_family remoti_gnl_family = { + .id = GENL_ID_GENERATE, + .name = "remoti", + .version = 1, + .maxattr = REMOTI_ATTR_RNP_MAX, +}; + +static struct genl_multicast_group remoti_state_mcgrp = { + .name = "rnp-state", +}; + +int remoti_mcast_msg(const int cmd, const int type, + const void *arg, const size_t len) +{ + int ret = -EINVAL; + struct sk_buff *msg; + void *hdr; + struct remoti_val val; + + memset(&val, 0, sizeof(val)); + + msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + hdr = genlmsg_put(msg, 0, 0, &remoti_gnl_family, 0, cmd); + if (IS_ERR(hdr)) { + ret = -ENOMEM; + goto out; + } + + switch (type) { + case REMOTI_TYPE_U8: + memcpy(&val.value.u, arg, len); + NLA_PUT_U8(msg, REMOTI_TYPE_U8, val.value.u); + break; + case REMOTI_TYPE_DATA: + NLA_PUT(msg, REMOTI_TYPE_DATA, len, arg); + break; + default: + return ret; + } + + ret = genlmsg_end(msg, hdr); + if (ret < 0) + goto out_free; + + genlmsg_multicast(msg, 0, remoti_state_mcgrp.id, GFP_KERNEL); + + return 0; + +nla_put_failure: + genlmsg_cancel(msg, hdr); +out_free: + if (msg) + nlmsg_free(msg); +out: + return ret; +} +EXPORT_SYMBOL(remoti_mcast_msg); + +static int remoti_nl_recv_msg(struct genl_info *info, + struct remoti_val *val) +{ + size_t len; + void *data; + + len = nla_len(info->attrs[REMOTI_TYPE_MSG]); + if (len < REMOTI_MSG_DATA) + return -EINVAL; + + data = nla_data(info->attrs[REMOTI_TYPE_MSG]); + memcpy(&val->value.msg, data, len); + + len = nla_len(info->attrs[REMOTI_TYPE_DATA]); + if (len != val->value.msg.len) + return -EINVAL; + + data = nla_data(info->attrs[REMOTI_TYPE_DATA]); + val->value.msg.data = kmalloc(val->value.msg.len, GFP_KERNEL); + if (!val->value.msg.data) + return -ENOMEM; + + memcpy(val->value.msg.data, data, val->value.msg.len); + + return 0; +} + +static int remoti_get_attr(struct sk_buff *skb, struct genl_info *info) +{ + struct remoti_device *rf; + struct genlmsghdr *hdr = nlmsg_data(info->nlhdr); + struct sk_buff *msg = NULL; + int ret = -EINVAL; + int cmd = hdr->cmd; + struct remoti_val val; + int type = REMOTI_TYPE_UNSPEC; + int rnp_id; + + memset(&val, 0, sizeof(val)); + + if (!info->attrs[REMOTI_TYPE_RNP_ID]) + rnp_id = -1; + else + rnp_id = nla_get_u8(info->attrs[REMOTI_TYPE_RNP_ID]); + + rf = remoti_get_device(rnp_id); + BUG_ON(!rf); + + spin_lock(&rf->lock); + + switch (cmd) { + case REMOTI_CMD_RNP_GET_STATE: + val.value.u = rf->state; + type = REMOTI_TYPE_U8; + break; + case REMOTI_CMD_RNP_GET_STATS: + memcpy(&val.value.stats, &rf->tsp->stats, sizeof(struct remoti_stats)); + type = REMOTI_TYPE_STATS; + break; + case REMOTI_CMD_RNP_GET_TRANSPORT: + val.value.s = kstrdup(rf->tsp->name, GFP_KERNEL); + type = REMOTI_TYPE_STRING; + break; + case REMOTI_CMD_RNP_SEND_CMD: + if (!info->attrs[REMOTI_TYPE_DATA]) { + spin_unlock(&rf->lock); + return ret; + } + + type = REMOTI_TYPE_DATA; + ret = remoti_nl_recv_msg(info, &val); + if (ret) { + spin_unlock(&rf->lock); + return ret; + } + + break; + + default: + spin_unlock(&rf->lock); + printk(KERN_ERR "unsupported command: %02x\n", cmd); + ret = -ENOTSUPP; + goto out; + } + + spin_unlock(&rf->lock); + + msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + if (!msg) { + ret = -ENOMEM; + goto out; + } + + hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, + &remoti_gnl_family, 0, cmd); + if (IS_ERR(hdr)) { + ret = -ENOMEM; + goto out; + } + + switch (type) { + case REMOTI_TYPE_U8: + NLA_PUT_U8(msg, REMOTI_TYPE_U8, val.value.u); + break; + case REMOTI_TYPE_INT: + NLA_PUT_U32(msg, REMOTI_TYPE_INT, val.value.i); + break; + case REMOTI_TYPE_STRING: + NLA_PUT_STRING(msg, REMOTI_TYPE_STRING, val.value.s); + break; + case REMOTI_TYPE_STATS: + NLA_PUT(msg, REMOTI_TYPE_STATS, sizeof(val.value.stats), &val.value.stats); + break; + case REMOTI_TYPE_DATA: + ret = remoti_send_frame(rf, &val.value.msg); + kfree(val.value.msg.data); + if (ret) + goto nla_put_failure; + + NLA_PUT(msg, REMOTI_TYPE_DATA, val.value.msg.len, val.value.msg.reply); + break; + default: + pr_err("invalid type: %d", type); + ret = -EINVAL; + goto out; + } + + ret = genlmsg_end(msg, hdr); + if (ret < 0) + goto nla_put_failure; + + return genlmsg_reply(msg, info); + +nla_put_failure: + if (msg) + nlmsg_free(msg); +out: + return ret; +} + +static int remoti_set_attr(struct sk_buff *skb, struct genl_info *info) +{ + struct genlmsghdr *hdr = nlmsg_data(info->nlhdr); + int cmd = hdr->cmd; + int ret = -EINVAL; + u8 val; + int rnp_id; + struct remoti_device *rf; + + if (!info->attrs[REMOTI_TYPE_RNP_ID]) + rnp_id = -1; + else + rnp_id = nla_get_u8(info->attrs[REMOTI_TYPE_RNP_ID]); + + rf = remoti_get_device(rnp_id); + BUG_ON(!rf); + + switch (cmd) { + case REMOTI_CMD_RNP_RELOAD_FW: + val = nla_get_u8(info->attrs[REMOTI_TYPE_U8]); + if (val) + ret = remoti_reload_firmware(rf); + break; + + default: + printk(KERN_ERR "unsupported command: %02x\n", cmd); + ret = -ENOTSUPP; + break; + } + + return ret; +} + +static struct genl_ops remoti_gnl_ops[] = { + { + .cmd = REMOTI_CMD_RNP_GET_STATE, + .policy = remoti_policy, + .doit = remoti_get_attr, + }, + { + .cmd = REMOTI_CMD_RNP_SEND_CMD, + .policy = remoti_policy, + .doit = remoti_get_attr, + }, + { + .cmd = REMOTI_CMD_RNP_RELOAD_FW, + .policy = remoti_policy, + .doit = remoti_set_attr, + }, + { + .cmd = REMOTI_CMD_RNP_GET_STATS, + .policy = remoti_policy, + .doit = remoti_get_attr, + }, + { + .cmd = REMOTI_CMD_RNP_GET_TRANSPORT, + .policy = remoti_policy, + .doit = remoti_get_attr, + }, +}; + +int remoti_netlink_register(void) +{ + int ret; + int i; + + ret = genl_register_family_with_ops(&remoti_gnl_family, + remoti_gnl_ops, + ARRAY_SIZE(remoti_gnl_ops)); + if (ret) + return ret; + + ret = genl_register_mc_group(&remoti_gnl_family, &remoti_state_mcgrp); + if (ret) + goto out_mcgrp; + + return 0; + +out_mcgrp: + for (i = 0; i < ARRAY_SIZE(remoti_gnl_ops); i++) + genl_unregister_ops(&remoti_gnl_family, &remoti_gnl_ops[i]); + + genl_unregister_family(&remoti_gnl_family); + + return ret; +} + +void remoti_netlink_unregister(void) +{ + int i; + + genl_unregister_mc_group(&remoti_gnl_family, &remoti_state_mcgrp); + + for (i = 0; i < ARRAY_SIZE(remoti_gnl_ops); i++) + genl_unregister_ops(&remoti_gnl_family, &remoti_gnl_ops[i]); + + genl_unregister_family(&remoti_gnl_family); +} diff -Nruw linux-3.2.13-fbx/drivers/misc/remoti./pairing.c linux-3.2.13-fbx/drivers/misc/remoti/pairing.c --- linux-3.2.13-fbx/drivers/misc/remoti./pairing.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/remoti/pairing.c 2013-06-13 15:06:40.178518372 +0200 @@ -0,0 +1,74 @@ +#include + +#include +#include + +static int remoti_pair_cnf(struct remoti_device *rf, + const struct remoti_msg *msg, + void *priv) +{ + /* forward data to netlink listeners */ + remoti_mcast_msg(REMOTI_CMD_RNP_PAIR_CNF, + REMOTI_TYPE_DATA, msg->data, msg->len); + + return 0; +} + +static int remoti_rx_data_ind(struct remoti_device *rf, + const struct remoti_msg *msg, + void *priv) +{ + /* forward data to netlink listeners */ + remoti_mcast_msg(REMOTI_CMD_RNP_DATA, + REMOTI_TYPE_DATA, msg->data, msg->len); + + return 0; +} + +static struct remoti_command remoti_pairing_commands[] = { + { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_RCAF, + .cmd = RTI_PAIR_REQ, + .len = 3, + }, + .fixed = 1, + .name = "pair", + .cnf = remoti_pair_cnf, + }, + { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_RCAF, + .cmd = RTI_ALLOW_PAIR_REQ, + .len = 3, + }, + .name = "allow_pair", + .fixed = 1, + .cnf = remoti_pair_cnf, + }, + { + .msg = { + .type = NPI_AREQ, + .subsys = NPI_SYS_RCAF, + .cmd = RTI_RECEIVE_DATA_IND, + .flags = MSG_STD_RESP, + .len = 7, + }, + .name = "rx_data_ind", + .cnf = remoti_rx_data_ind, + }, +}; + +int remoti_pairing_init(void) +{ + return remoti_register_commands(remoti_pairing_commands, + ARRAY_SIZE(remoti_pairing_commands)); +} + +void remoti_pairing_exit(void) +{ + remoti_unregister_commands(remoti_pairing_commands, + ARRAY_SIZE(remoti_pairing_commands)); +} diff -Nruw linux-3.2.13-fbx/drivers/misc/remoti./uart.c linux-3.2.13-fbx/drivers/misc/remoti/uart.c --- linux-3.2.13-fbx/drivers/misc/remoti./uart.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/misc/remoti/uart.c 2013-06-13 15:06:40.178518372 +0200 @@ -0,0 +1,399 @@ +/* + * RemoTI UART transport driver + * + * Copyright (C) 2010, Florian Fainelli +#include +#include +#include +#include + +#define tty_to_remoti_uart(tty) ((struct remoti_uart *)tty->disc_data) + +#define PFX KBUILD_MODNAME ": " + +#define RTI_WAKEUP 0x00 +#define RTI_SOF 0xFE + +enum rti_fsm_state { + RTI_FSM_SOF = 0, + RTI_FSM_LEN, + RTI_FSM_DATA, + RTI_FSM_FCS +}; + +struct rti_frame { + u8 sof; + struct rti_hdr hdr; + u8 *data; + u8 fcs; +} __packed; + +/* + * Private transport structure + */ +struct remoti_uart { + struct remoti_transport *tsp; + struct tty_struct *tty; + struct mutex mutex; + unsigned fsm_state; + unsigned sent_wakeup; + + u8 tx_buf[NPI_MAX_FRAME_LEN]; + u8 tx_buf_len; + + u8 rx_buf_len; + u8 rx_buf[NPI_MAX_FRAME_LEN]; + u8 rx_count; +}; + +static int remoti_handle_tx(struct remoti_uart *rti_uart) +{ + struct tty_struct *tty; + struct remoti_transport *tsp; + int tty_wr, len, room; + char *buf; + + tty = rti_uart->tty; + tsp = rti_uart->tsp; + + if (test_and_set_bit(REMOTI_TX, &tsp->state)) { + set_bit(REMOTI_TX_COMPLETE, &tsp->state); + return 0; + } + + do { + buf = rti_uart->tx_buf; + len = rti_uart->tx_buf_len; + + clear_bit(REMOTI_TX_COMPLETE, &tsp->state); + room = tty_write_room(tty); + + if (len > room) + len = room; + + tty_wr = tty->ops->write(tty, buf, len); + + tsp->stats.tx_bytes += tty_wr; + tsp->stats.tx_packets++; + + } while (test_bit(REMOTI_TX_COMPLETE, &tsp->state)); + + clear_bit(REMOTI_TX, &tsp->state); + + return 0; +} + + +static inline u8 remoti_calc_fcs(const u8 *data, int len) +{ + u8 fcs = 0; + + while (len--) + fcs ^= *data++; + + return fcs; +} + +/* RX path finite state machine */ +static void remoti_receive(struct remoti_uart *rti_uart, const u8 c) +{ + struct remoti_transport *tsp = rti_uart->tsp; + u8 fcs = 0; + + switch (rti_uart->fsm_state) { + case RTI_FSM_SOF: + if (c == RTI_SOF) { + rti_uart->fsm_state = RTI_FSM_LEN; + rti_uart->rx_buf_len = 0; + } + break; + case RTI_FSM_LEN: + if (c == RTI_SOF) + break; + + /* Guard against malformed frames */ + if (c > NPI_MAX_MSG_LEN) { + rti_uart->fsm_state = RTI_FSM_SOF; + break; + } + + rti_uart->rx_buf_len = c + RTI_HDR_SIZE; + rti_uart->rx_count = 0; + rti_uart->rx_buf[rti_uart->rx_count++] = c; + rti_uart->fsm_state = RTI_FSM_DATA; + break; + case RTI_FSM_DATA: + rti_uart->rx_buf[rti_uart->rx_count++] = c; + if (rti_uart->rx_count == rti_uart->rx_buf_len) + rti_uart->fsm_state = RTI_FSM_FCS; + break; + case RTI_FSM_FCS: + rti_uart->fsm_state = RTI_FSM_SOF; + + fcs = remoti_calc_fcs(rti_uart->rx_buf, rti_uart->rx_count); + if (fcs != c) { + tsp->stats.rx_fcs_errors++; + break; + } + + if (remoti_check_frame(rti_uart->tsp, + rti_uart->rx_buf, rti_uart->rx_count)) { + tsp->stats.rx_dropped++; + break; + } + + /* Pass the frame to upper layers */ + remoti_receive_frame(tsp, + rti_uart->rx_buf, rti_uart->rx_count); + + tsp->stats.rx_bytes += rti_uart->rx_count; + tsp->stats.rx_packets++; + break; + } +} + +static void remoti_rx_error(struct remoti_uart *rti_uart, u8 data, + char *flags) +{ + rti_uart->fsm_state = RTI_FSM_SOF; + rti_uart->tsp->stats.rx_dropped++; +} + + +static void remoti_tty_recv_buf(struct tty_struct *tty, const u8 *data, + char *flags, int count) +{ + struct remoti_uart *rti_uart = tty_to_remoti_uart(tty); + const u8 *dp; + char *f; + int i; + char flag, buf[64]; + + BUG_ON(!rti_uart); + + set_bit(REMOTI_RX, &rti_uart->tsp->state); + + /* Handle special wakeup bytes first */ + if (data[0] == RTI_WAKEUP && count == 1) { + rti_uart->sent_wakeup = 1; + return; + } + + /* Walk the received buffer in inverse order */ + for (i = 0, dp = data, f = flags; i < count; i++, dp++) { + flag = *f++; + switch (flag) { + case TTY_NORMAL: + remoti_receive(rti_uart, *dp); + break; + case TTY_OVERRUN: + case TTY_BREAK: + case TTY_PARITY: + case TTY_FRAME: + remoti_rx_error(rti_uart, *dp, flags); + break; + default: + printk(KERN_ERR "%s: unknown flag %d\n", + tty_name(tty, buf), flag); + break; + } + } +} + +static void remoti_tty_write_buf(struct tty_struct *tty) +{ + struct remoti_uart *rti_uart = tty_to_remoti_uart(tty); + + BUG_ON(!rti_uart); + BUG_ON(rti_uart->tty != tty); + + /* Do not queue work if we are closing */ + if (test_bit(TTY_CLOSING, &tty->flags)) + return; + + set_bit(REMOTI_TX_COMPLETE, &rti_uart->tsp->state); + remoti_handle_tx(rti_uart); +} + +static inline int remoti_uart_send(struct remoti_transport *tsp, + const struct remoti_msg *msg) +{ + u8 *fcs_payload; + struct rti_frame *frame; + unsigned payload_offset; + struct remoti_uart *rti_uart = tsp->priv; + + if (msg->len > NPI_MAX_MSG_LEN) + return -EINVAL; + + payload_offset = sizeof(frame->sof) + sizeof(frame->hdr); + + if (msg->len + payload_offset > NPI_MAX_FRAME_LEN) + return -EINVAL; + + mutex_lock(&rti_uart->mutex); + frame = (struct rti_frame *)&rti_uart->tx_buf; + frame->sof = RTI_SOF; + frame->hdr.len = msg->len; + frame->hdr.subsys = (msg->type << NPI_TYPE_SHIFT) | + (msg->subsys & NPI_SYS_MASK); + frame->hdr.cmd = msg->cmd; + + switch (msg->subsys) { + case NPI_SYS_RCAF: + tsp->stats.tx_rcaf_packets++; + break; + case NPI_SYS_UTIL: + tsp->stats.tx_util_packets++; + break; + case NPI_SYS_BOOT: + tsp->stats.tx_boot_packets++; + break; + } + + /* + * make frame->data point to an appropriate location + */ + if (msg->data) { + frame->data = (u8 *)(rti_uart->tx_buf + payload_offset); + memcpy(frame->data, msg->data, msg->len); + } + + fcs_payload = (u8 *)&frame->hdr; + rti_uart->tx_buf[payload_offset + msg->len] = remoti_calc_fcs(fcs_payload, + sizeof(frame->hdr) + msg->len); + rti_uart->tx_buf_len = sizeof(*frame) - sizeof(u8 *) + msg->len; + + mutex_unlock(&rti_uart->mutex); + + remoti_tty_write_buf(rti_uart->tty); + + return 0; +} + +static unsigned remoti_uart_sent_wakeup(struct remoti_transport *tsp) +{ + struct remoti_uart *rti_uart = tsp->priv; + + return rti_uart->sent_wakeup; +} + +static int remoti_uart_send_wakeup(struct remoti_transport *tsp) +{ + struct remoti_uart *rti_uart = tsp->priv; + + rti_uart->tx_buf[0] = 0; + rti_uart->tx_buf_len = 1; + + remoti_tty_write_buf(rti_uart->tty); + + return 0; +} + +static int remoti_tty_open(struct tty_struct *tty) +{ + struct remoti_uart *rti_uart; + struct remoti_transport *tsp; + int ret; + + rti_uart = kzalloc(sizeof(*rti_uart), GFP_KERNEL); + if (!rti_uart) { + pr_err(PFX "no memory for uart priv"); + return -ENOMEM; + } + + rti_uart->tty = tty_kref_get(tty); + mutex_init(&rti_uart->mutex); + tty->disc_data = rti_uart; + tty->receive_room = 65536; + + tsp = kzalloc(sizeof(*tsp), GFP_KERNEL); + if (!tsp) { + pr_err(PFX "no memory for transport"); + ret = -ENOMEM; + goto out_free_uart; + } + + rti_uart->tsp = tsp; + tsp->priv = rti_uart; + tsp->id = -1; + tsp->name = "uart"; + tsp->send = remoti_uart_send; + tsp->send_wakeup = remoti_uart_send_wakeup; + tsp->check_wakeup = remoti_uart_sent_wakeup; + + ret = remoti_transport_register(tsp); + if (ret) { + pr_err("failed to register transport"); + goto out_tsp; + } + + /* Release RNP from sleep */ + tsp->send_wakeup(tsp); + + /* Defer the actual RNP initialization */ + if (!tsp->check_wakeup(tsp)) { + cancel_delayed_work(&tsp->rf->hw_init_work); + queue_delayed_work(tsp->rf->workqueue, &tsp->rf->hw_init_work, HZ / 100); + } + + return 0; + +out_tsp: + kfree(tsp); + rti_uart->tsp = NULL; +out_free_uart: + tty_kref_put(rti_uart->tty); + kfree(rti_uart); + + return ret; +} + +static void remoti_tty_close(struct tty_struct *tty) +{ + struct remoti_uart *rti_uart = tty_to_remoti_uart(tty); + + BUG_ON(!rti_uart); + BUG_ON(rti_uart->tty != tty); + + remoti_transport_unregister(rti_uart->tsp); + + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + tty_kref_put(rti_uart->tty); + + rti_uart->sent_wakeup = 0; + kfree(rti_uart->tsp); + kfree(rti_uart); +} + +static struct tty_ldisc_ops remoti_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "n_remoti", + .open = remoti_tty_open, + .close = remoti_tty_close, + .receive_buf = remoti_tty_recv_buf, + .write_wakeup = remoti_tty_write_buf, +}; + +static int __init remoti_uart_init(void) +{ + return tty_register_ldisc(N_REMOTI, &remoti_ldisc); +} + +static void __exit remoti_uart_exit(void) +{ + tty_unregister_ldisc(N_REMOTI); +} + +module_init(remoti_uart_init); +module_exit(remoti_uart_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("RemoTI UART transport driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_LDISC(N_REMOTI); --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/drivers/mtd/fbx6hd-mtdparts.c 2012-07-27 18:10:45.116135848 +0200 @@ -0,0 +1,244 @@ +/* + * MTD parser for fbx6hd, just return a static mtd partition + * list. optionally set all partitions to read/write if requested by + * config. + */ + +#include +#include +#include +#include + +#define PFX "fbx6hd-mtdparts: " + +#define SZ_1M (1 << 20) + +#define MBR_BLOCKS (8) +#define CEFDK_S1_BLOCKS (8) +#define CEFDK_S2_BLOCKS (8 * 4) +#define SERIAL_BLOCKS (16) +#define KEYS_BLOCKS (8) + + +#define BANK0_SIZE (18 * SZ_1M) +#define CONFIG_SIZE (7 * SZ_1M) +#define NEWBANK0_SIZE BANK0_SIZE +enum { + E_PART_ALL, + E_PART_MBR, + E_PART_CEFDK_S1_B0, + E_PART_CEFDK_S1_B1, + E_PART_CEFDK_S2_B0, + E_PART_CEFDK_S2_B1, + E_PART_SERIALINFO, + E_PART_KEYS, + E_PART_BANK0, + E_PART_CONFIG, + E_PART_BANK1, + E_PART_NEWBANK0, +}; + +static struct mtd_partition fbx6hd_nand_partitions[] = { + [E_PART_ALL] = { + .name = "all", + .offset = -1, + .size = -1, + .mask_flags = MTD_WRITEABLE, + }, + [E_PART_MBR] = { + .name = "mbr", + .offset = -1, + .size = -1, + .mask_flags = MTD_WRITEABLE, + }, + [E_PART_CEFDK_S1_B0] = { + .name = "cefdk-stage1-bank0", + .offset = -1, + .size = -1, + .mask_flags = MTD_WRITEABLE, + }, + [E_PART_CEFDK_S1_B1] = { + .name = "cefdk-stage1-bank1", + .offset = -1, + .size = -1, + }, + [E_PART_CEFDK_S2_B0] = { + .name = "cefdk-stage2-bank0", + .offset = -1, + .size = -1, + .mask_flags = MTD_WRITEABLE, + }, + [E_PART_CEFDK_S2_B1] = { + .name = "cefdk-stage2-bank1", + .offset = -1, + .size = -1, + }, + [E_PART_SERIALINFO] = { + .name = "serial", + .offset = -1, + .size = -1, + .mask_flags = MTD_WRITEABLE, + }, + [E_PART_KEYS] = { + .name = "keys", + .offset = -1, + .size = -1, + }, + [E_PART_BANK0] = { + .name = "bank0", + .offset = -1, + .size = -1, + .mask_flags = MTD_WRITEABLE, + }, + [E_PART_CONFIG] = { + .name = "config", + .offset = -1, + .size = -1, + }, + [E_PART_BANK1] = { + .name = "bank1", + .offset = -1, + .size = -1, + }, + [E_PART_NEWBANK0] = { + .name = "newbank0", + .offset = -1, + .size = -1, + }, +}; + +static int fbx6hd_parse_mtd_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + struct mtd_part_parser_data *pdata) +{ + struct mtd_partition *bank1; + struct mtd_partition *newbank0; + struct mtd_partition *cur_part; + u32 cur_offset; + + /* + * make all partition cover the whole flash. + */ + cur_part = &fbx6hd_nand_partitions[E_PART_ALL]; + cur_part->offset = 0; + cur_part->size = master->size; + + /* + * start filling partition offset/size one by one. + */ + cur_offset = 0; + cur_part = &fbx6hd_nand_partitions[E_PART_MBR]; + cur_part->offset = cur_offset; + cur_part->size = MBR_BLOCKS * master->erasesize; + + /* + * CEFDK stage1 partitions + */ + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_CEFDK_S1_B0]; + cur_part->offset = cur_offset; + cur_part->size = CEFDK_S1_BLOCKS * master->erasesize; + + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_CEFDK_S1_B1]; + cur_part->offset = cur_offset; + cur_part->size = CEFDK_S1_BLOCKS * master->erasesize; + + /* + * CEFDK stage2 partitions + */ + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_CEFDK_S2_B0]; + cur_part->offset = cur_offset; + cur_part->size = CEFDK_S2_BLOCKS * master->erasesize; + + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_CEFDK_S2_B1]; + cur_part->offset = cur_offset; + cur_part->size = CEFDK_S2_BLOCKS * master->erasesize; + + /* + * Freebox specific + */ + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_SERIALINFO]; + cur_part->offset = cur_offset; + cur_part->size = SERIAL_BLOCKS * master->erasesize; + + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_KEYS]; + cur_part->offset = cur_offset; + cur_part->size = KEYS_BLOCKS * master->erasesize; + + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_BANK0]; + cur_part->offset = cur_offset; + cur_part->size = BANK0_SIZE; + + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_CONFIG]; + cur_part->offset = cur_offset; + cur_part->size = CONFIG_SIZE; + + cur_offset += cur_part->size; + cur_part = &fbx6hd_nand_partitions[E_PART_BANK1]; + cur_part->offset = cur_offset; + cur_part->size = master->size - cur_offset; + + /* + * newbank0 starts inside bank1 partition and ends at the end + * of the flash. + */ + cur_offset = master->size - NEWBANK0_SIZE; + cur_part = &fbx6hd_nand_partitions[E_PART_NEWBANK0]; + cur_part->offset = cur_offset; + cur_part->size = NEWBANK0_SIZE; + + /* + * some basic sanity checks before to avoid botched partitiont + * table. + */ + bank1 = &fbx6hd_nand_partitions[E_PART_BANK1]; + newbank0 = &fbx6hd_nand_partitions[E_PART_NEWBANK0]; + if (bank1->offset > master->size) { + printk(KERN_CRIT PFX "bank1 partition starts after flash " + "end: use a bigger flash.\n"); + return -ENOSPC; + } + + if (newbank0->offset < bank1->offset) { + printk(KERN_CRIT PFX "newbank0 starts before bank1: use a " + "bigger flash.\n"); + return -ENOSPC; + } + + printk(KERN_INFO PFX "%llu MiB available for bank1.\n", + bank1->size >> 20); + +#ifdef CONFIG_MTD_FBX6HD_PARTS_WRITE_ALL + int i; + for (i = 0; i < ARRAY_SIZE(fbx6hd_nand_partitions); ++i) + fbx6hd_nand_partitions[i].mask_flags &= ~MTD_WRITEABLE; +#endif + + *pparts = kmemdup(fbx6hd_nand_partitions, + sizeof (fbx6hd_nand_partitions), GFP_KERNEL); + return ARRAY_SIZE(fbx6hd_nand_partitions); +} + +struct mtd_part_parser fbx6hd_mtd_parser = { + .owner = THIS_MODULE, + .parse_fn = fbx6hd_parse_mtd_partitions, + .name = "fbx6hd-mtdparts", +}; + +static int __init fbx6hd_parser_init(void) +{ + return register_mtd_parser(&fbx6hd_mtd_parser); +} + +module_init(fbx6hd_parser_init); + + +MODULE_AUTHOR("Nicolas Schichan "); +MODULE_LICENSE("GPL"); --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/drivers/mtd/nand/denali_nand.c 2013-06-13 15:06:40.214518353 +0200 @@ -0,0 +1,1053 @@ +/* + * denali nand controller driver. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define PFX "denali_nand: " + +#include "denali_nand.h" + +static const char *parts_parsers[] = { "fbx6hd-mtdparts", NULL }; + +static int max_mode __read_mostly = 4; +module_param(max_mode, int, 0); +MODULE_PARM_DESC(max_mode, "Maximum ONFI timing mode supported (default: 4)"); + +static int map_mode __read_mostly; +module_param(map_mode, int, 0); +MODULE_PARM_DESC(map_mode, "MAP mode to use (01, 10, 11)"); + +static int dnl_reset_bank(struct denali_nand_priv *priv); + +/* + * register accessors + */ +static inline u32 dnl_reg_readl(struct denali_nand_priv *priv, u32 addr) +{ + return readl(priv->regs + addr); +} + +static inline void dnl_reg_writel(struct denali_nand_priv *priv, u32 val, + u32 addr) +{ + writel(val, priv->regs + addr); +} + +/* + * mem accessors. + */ +static inline u32 dnl_mem_readl(struct denali_nand_priv *priv, u32 addr) +{ + return readl(priv->mem + addr); +} + +static inline void dnl_mem_writel(struct denali_nand_priv *priv, u32 val, + u32 addr) +{ + writel(val, priv->mem + addr); +} + +/* + * read/write to/from a map. + */ +static uint32_t dnl_map_read(struct denali_nand_priv *priv, u32 map_ctl) +{ + dnl_mem_writel(priv, map_ctl, DNL_MAP_CTL_REG); + return dnl_mem_readl(priv, DNL_MAP_DATA_REG); +} + +static void dnl_map_write(struct denali_nand_priv *priv, u32 data, + u32 map_ctl) +{ + dnl_mem_writel(priv, map_ctl, DNL_MAP_CTL_REG); + dnl_mem_writel(priv, data, DNL_MAP_DATA_REG); +} + +/* + * write_buf: support only map11 write, direct NAND bus access. + */ +static void dnl_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct nand_chip *nand; + struct denali_nand_priv *priv; + int i; + u32 map_ctl; + + nand = mtd->priv; + priv = nand->priv; + + map_ctl = DNL_MAP_11_MASK; + map_ctl |= priv->chip_num << DNL_CHIP_SHIFT; + map_ctl |= DNL_MAP_11_DATA_MASK; + + dnl_mem_writel(priv, map_ctl, DNL_MAP_CTL_REG); + + for (i = 0; i < len; ++i) + dnl_mem_writel(priv, buf[i], DNL_MAP_DATA_REG); +} + +static u8 dnl_read_map11_byte(struct denali_nand_priv *priv) +{ + u8 ret; + u32 map_ctl; + + map_ctl = DNL_MAP_11_MASK; + map_ctl |= priv->chip_num << DNL_CHIP_SHIFT; + map_ctl |= DNL_MAP_11_DATA_MASK; + + ret = dnl_map_read(priv, map_ctl); + return ret; +} + +static u8 dnl_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *nand; + struct denali_nand_priv *priv; + + nand = mtd->priv; + priv = nand->priv; + + if (priv->buf_mode != E_BUFMODE_MAP11) { + printk(KERN_ERR PFX "read_byte() when not in MAP11 mode is " + "not supported.\n"); + return 0xff; + } + + return dnl_read_map11_byte(priv); +} + +/* + * map11 read_buf: all accesses will generate a data read on the NAND + * bus. + */ +static void dnl_read_map11_buf(struct denali_nand_priv *priv, + uint8_t *buf, int len) +{ + int i; + u32 map_ctl; + + map_ctl = DNL_MAP_11_MASK; + map_ctl |= priv->chip_num << DNL_CHIP_SHIFT; + map_ctl |= DNL_MAP_11_DATA_MASK; + + dnl_mem_writel(priv, map_ctl, DNL_MAP_CTL_REG); + + for (i = 0; i < len; ++i) + buf[i] = dnl_mem_readl(priv, DNL_MAP_DATA_REG); +} + +static void dnl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct nand_chip *nand; + struct denali_nand_priv *priv; + + nand = mtd->priv; + priv = nand->priv; + + dnl_read_map11_buf(priv, buf, len); +} + +/* + * enable/disable DMA helpers. DMA MUST be enabled before issuing the + * MAP10 four command sequence. + */ +static void dnl_enable_dma(struct denali_nand_priv *priv) +{ + dnl_reg_writel(priv, 1, DNL_DMA_ENABLE); + dnl_reg_readl(priv, DNL_DMA_ENABLE); +} + +static void dnl_disable_dma(struct denali_nand_priv *priv) +{ + dnl_reg_writel(priv, 0, DNL_DMA_ENABLE); + dnl_reg_readl(priv, DNL_DMA_ENABLE); +} + +/* + * used before and after reading/writing OOB. + */ +static void dnl_set_transfer_mode(struct denali_nand_priv *priv, + int page, int mode) +{ + u32 map_ctl; + u32 data; + + map_ctl = DNL_MAP_10_MASK; + map_ctl |= (priv->chip_num << DNL_CHIP_SHIFT); + map_ctl |= page; + data = mode; + + dnl_map_write(priv, data, map_ctl); +} + +static void dnl_clear_all_interrupts(struct denali_nand_priv *priv) +{ + u32 reg_offset; + + reg_offset = DNL_0_INTR_STATUS_REG + (priv->chip_num * 0x14) * 4; + dnl_reg_writel(priv, 0xffff, reg_offset); +} + +/* + * configure a DMA access using the mapped dma buffer in priv. this is + * done by issuing the 4 command sequence described in the + * documentation, chapter7, page 52. + */ +static void dnl_setup_dma(struct denali_nand_priv *priv, + u32 page_addr, int access_mode) +{ + uint32_t map_ctl; + uint32_t data; + uint16_t addr_hi; + uint16_t addr_lo; + + addr_hi = ((u32)priv->read_buf_dma >> 16) & 0xffff; + addr_lo = (u32)priv->read_buf_dma & 0xffff; + + map_ctl = DNL_MAP_10_MASK | (priv->chip_num << DNL_CHIP_SHIFT); + + /* + * first step, transmit page_addr, select between program or + * read.. + */ + if (access_mode == DNL_E_DMA_PROGRAM) + data = DNL_MAP10_DMA_WRITE_PAGE; + else + data = DNL_MAP10_DMA_READ_PAGE; + dnl_map_write(priv, data, map_ctl | page_addr); + + /* + * second step, transmit addr_hi + */ + dnl_map_write(priv, DNL_MAP10_DMA_SET_ADDR_HI, + map_ctl | (addr_hi << 8)); + + /* + * third step, transmit addr_lo + */ + dnl_map_write(priv, DNL_MAP10_DMA_SET_ADDR_LO, + map_ctl | (addr_lo << 8)); + + /* + * fourth step, raise interrupt when complete, 64byte burst. + */ + dnl_map_write(priv, DNL_MAP10_DMA_SET_PARAMS, + map_ctl | DNL_DMA_PARAM_GEN_INT | DNL_DMA_BURST_64); +} + +/* + * wait for specific interrupt flag to be set by hardware. wait at + * most for 2 seconds for this to happen or timeout. + * + * more than one bit can be set in the status_mask (for instance to + * watch program_complete and program_failed interrupt events). the + * status that caused this function to return is set in *res_status + * for the caller layer to sort out. + */ +static int dnl_spin_for_mask(struct denali_nand_priv *priv, + u32 status_mask, u32 *res_status) +{ + u32 count; + u32 status; + u32 reg_offset; + + /* + * select the status register of the chip we want to spin on. + */ + reg_offset = DNL_0_INTR_STATUS_REG + (priv->chip_num * 0x14) * 4; + + /* + * wait, use a two second timeout, should yield a confortable + * margin for any expected irq bit to be set. + */ + count = 200000; + while (count) { + status = dnl_reg_readl(priv, reg_offset); + if (status & status_mask) { + dnl_reg_writel(priv, status_mask, reg_offset); + *res_status = status; + return 0; + } + cpu_relax(); + --count; + } + + printk(KERN_ERR PFX "timedout waiting for %08x: status %08x\n", + status_mask, status); + return -ETIMEDOUT; +} + +/* + * read a page using DMA. + */ +static int dnl_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + struct denali_nand_priv *priv = nand->priv; + u32 status; + + dma_sync_single_for_device(&priv->dev->dev, priv->read_buf_dma, + priv->read_buf_size, DMA_FROM_DEVICE); + + dnl_enable_dma(priv); + dnl_setup_dma(priv, page, DNL_E_DMA_READ); + + if (dnl_spin_for_mask(priv, + DNL_INT_DMA_DATA_CMD_COMPLETE | + DNL_INT_BAD_CMD_SEQ, + &status) < 0) { + printk(KERN_ERR PFX "timedout waiting for DMA.\n"); + return -ETIMEDOUT; + } + udelay(20); + + /* + * disable and sync dma before considering status. + */ + dnl_disable_dma(priv); + dma_sync_single_for_cpu(&priv->dev->dev, priv->read_buf_dma, + priv->read_buf_size, DMA_FROM_DEVICE); + + if (status & DNL_INT_BAD_CMD_SEQ) { + printk(KERN_ERR PFX "controller reported a bad command " + "sequence.\n"); + return -EIO; + } + + memcpy(buf, priv->read_buf, mtd->writesize); + memcpy(nand->oob_poi, priv->read_buf + mtd->writesize, mtd->oobsize); + + return 0; +} + +/* + * access oob zone using MAP01 command and no DMA. + */ +static int dnl_read_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page, int sndcmd) +{ + struct denali_nand_priv *priv = nand->priv; + u32 map_ctl; + u32 pos; + u32 *buf32; + u32 status; + + dnl_clear_all_interrupts(priv); + + /* + * tell the hardware to read only spare in MAP01 mode. + */ + dnl_set_transfer_mode(priv, page, DNL_XFER_SPARE_ONLY); + + /* + * select the page to read oob from. + */ + map_ctl = DNL_MAP_01_MASK | page; + dnl_mem_writel(priv, map_ctl, DNL_MAP_CTL_REG); + + /* + * read oob. + */ + buf32 = (u32*)nand->oob_poi; + for (pos = 0; pos < mtd->oobsize; pos += 4) + buf32[pos / 4] = dnl_mem_readl(priv, DNL_MAP_DATA_REG); + + /* + * ok, we already have the data in nand->oob_poi, so I guess + * this is in the original driver just to be sure that we have + * not read crap from the controller. + */ + if (dnl_spin_for_mask(priv, DNL_INT_LOAD_COMPLETE, &status) < 0) { + printk("timeouted waiting for oob load completion.\n"); + return -ETIMEDOUT; + } + + /* + * switch back to MAIN + SPARE mode. + */ + dnl_set_transfer_mode(priv, page, DNL_XFER_SPARE_AND_MAIN); + + return 0; +} + +/* + * write oob zone of given page. use MAP01 command, no DMA. + */ +static int dnl_write_oob(struct mtd_info *mtd, struct nand_chip *nand, int page) +{ + struct denali_nand_priv *priv = nand->priv; + u32 map_ctl; + u32 *buf32; + u32 pos; + u32 status; + + dnl_clear_all_interrupts(priv); + + /* + * tell the hardware to read only spare in MAP01 mode. + */ + dnl_set_transfer_mode(priv, page, DNL_XFER_SPARE_ONLY); + + /* + * select the page to write oob from. + */ + map_ctl = DNL_MAP_01_MASK | page; + dnl_mem_writel(priv, map_ctl, DNL_MAP_CTL_REG); + + /* + * write the oob data to the controller. + */ + buf32 = (u32*)nand->oob_poi; + for (pos = 0; pos < mtd->oobsize; pos += 4) + dnl_mem_writel(priv, buf32[pos / 4], DNL_MAP_DATA_REG); + + if (dnl_spin_for_mask(priv, + DNL_INT_PROGRAM_COMPLETE | + DNL_INT_PROGRAM_FAIL, + &status) < 0) { + printk(KERN_ERR PFX "timeouted waiting for OOB program.\n"); + return -ETIMEDOUT; + } + + + /* + * switch back to MAIN + SPARE mode. + */ + dnl_set_transfer_mode(priv, page, DNL_XFER_SPARE_AND_MAIN); + + if (status & DNL_INT_PROGRAM_FAIL) { + printk(KERN_ERR PFX "controller reported a bad OOB program.\n"); + return -EIO; + } + + return 0; +} + + +/* + * issue an erase command using MAP10 command and wait for command + * completion. + */ +static void dnl_erase_cmd(struct mtd_info *mtd, int page) +{ + struct nand_chip *nand = mtd->priv; + struct denali_nand_priv *priv = nand->priv; + u32 map_ctl; + u32 data; + u32 status; + + dnl_clear_all_interrupts(priv); + + map_ctl = DNL_MAP_10_MASK | page; + data = DNL_MAP10_ERASE_COMMAND; + dnl_map_write(priv, data, map_ctl); + + if (dnl_spin_for_mask(priv, + DNL_INT_ERASE_FAILED | DNL_INT_ERASE_COMPLETE, + &status) < 0) { + printk(KERN_ERR PFX "timeouted waiting for erase on page " + "%u.\n", page); + return ; + } + + if (status & DNL_INT_ERASE_FAILED) { + printk(KERN_ERR PFX "controller reported erase failed on " + "block %i\n", page); + return ; + } +} + +/* + * start a page write, use DMA. + */ +static void dnl_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf) +{ + struct denali_nand_priv *priv = nand->priv; + u32 status; + + /* + * build buffer for DMA with oob tightly following data. + */ + memcpy(priv->read_buf, buf, mtd->writesize); + memcpy(priv->read_buf + mtd->writesize, nand->oob_poi, mtd->oobsize); + + dma_sync_single_for_device(&priv->dev->dev, priv->read_buf_dma, + priv->read_buf_size, DMA_TO_DEVICE); + + dnl_clear_all_interrupts(priv); + dnl_enable_dma(priv); + dnl_setup_dma(priv, priv->page, DNL_E_DMA_PROGRAM); + + if (dnl_spin_for_mask(priv, + DNL_INT_DMA_DATA_CMD_COMPLETE | + DNL_INT_PROGRAM_FAIL | + DNL_INT_BAD_CMD_SEQ, + &status) < 0) { + printk(KERN_ERR PFX "timedout waiting for program completion " + "on page %u\n", priv->page); + return ; + } + + dnl_disable_dma(priv); + dma_sync_single_for_cpu(&priv->dev->dev, priv->read_buf_dma, + priv->read_buf_size, DMA_TO_DEVICE); + + if (status & DNL_INT_PROGRAM_FAIL) { + printk(KERN_ERR PFX "controller reported a program failure " + "on page %u\n", priv->page); + return ; + } + + if (status & DNL_INT_BAD_CMD_SEQ) { + printk(KERN_ERR PFX "controller reported a bad command " + "sequence.\n"); + return ; + } +} + +/* + * command control: a NAND bus access will be generated with this + * function (command, address, or data). + */ +static void dnl_cmd_ctrl(struct mtd_info *mtd, int command, + unsigned int ctrl) +{ + struct nand_chip *nand; + struct denali_nand_priv *priv; + u32 map_ctl; + + nand = mtd->priv; + priv = nand->priv; + + map_ctl = DNL_MAP_11_MASK; + map_ctl |= priv->chip_num << DNL_CHIP_SHIFT; + + if (command == NAND_CMD_NONE) + return ; + + /* + * depending on address, or command cycle, set map_ctl with the + * correct bits. + */ + if (ctrl & NAND_CLE) + map_ctl |= DNL_MAP_11_CMD_MASK; + else if (ctrl & NAND_ALE) + map_ctl |= DNL_MAP_11_ADDR_MASK; + else + BUG(); + + dnl_map_write(priv, command & 0xff, map_ctl); +} + +/* + * generate needed address cycles to output column and page to the NAND + * bus. + */ +static void dnl_shift_addresses(struct mtd_info *mtd, + int column, int page) +{ + struct nand_chip *nand; + + nand = mtd->priv; + + if (column != -1) { + nand->cmd_ctrl(mtd, column, NAND_ALE); + nand->cmd_ctrl(mtd, column >> 8, NAND_ALE); + } + + if (page != -1) { + nand->cmd_ctrl(mtd, page, NAND_ALE); + nand->cmd_ctrl(mtd, page >> 8, NAND_ALE); + if (nand->chipsize > (128 << 20)) + nand->cmd_ctrl(mtd, page >> 16, NAND_ALE); + } +} + +/* + * our cmdfunc callback. this duplicates some code from the upper + * layer nand_command_lp() function. page READ (NAND_CMD_READ0 + * commands) are issued using MAP01/MAP10 commands which are faster. + */ +static void dnl_cmdfunc(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) +{ + struct nand_chip *nand; + struct denali_nand_priv *priv; + + nand = mtd->priv; + priv = nand->priv; + + switch (command) { + case NAND_CMD_RESET: + dnl_reset_bank(priv); + break; + + case NAND_CMD_READID: + /* + * read id page. set bufmode to map11 so that upper + * layer can read the result using the correct method. + */ + nand->cmd_ctrl(mtd, NAND_CMD_READID, NAND_CLE); + dnl_shift_addresses(mtd, column, page_addr); + udelay(35); + priv->buf_mode = E_BUFMODE_MAP11; + break; + + case NAND_CMD_PARAM: + nand->cmd_ctrl(mtd, NAND_CMD_PARAM, NAND_CLE); + dnl_shift_addresses(mtd, column, page_addr); + udelay(35); + break; + + case NAND_CMD_SEQIN: + case NAND_CMD_READ0: + priv->page = page_addr; + priv->page = page_addr; + break; + + case NAND_CMD_STATUS: + /* + * issue status register read command, and tell + * read_buf/read_byte to use MAP11. + */ + nand->cmd_ctrl(mtd, NAND_CMD_STATUS, NAND_CLE); + priv->buf_mode = E_BUFMODE_MAP11; + break; + + + case NAND_CMD_PAGEPROG: + break; + + default: + printk("warning: unhandled command %x (please report)\n", + command); + return ; + } + + ndelay(100); +} + +static inline u32 ceil_div(u32 x, u32 y) +{ + if (x % y) + return x / y + 1; + else + return x / y; +} + +#define CLK_X 5 +#define CLK_MULTI 4 + +/* + * calculate ONFI timings for given onfi mode. copied from spectra + * driver, should yield the same timings. + */ +static void dnl_calc_onfi_timings(struct denali_nand_priv *priv, + int onfi_mode) +{ + static const u8 Trea[6] = { 40, 30, 25, 20, 20, 16 }; + static const u8 Trp[6] = { 50, 25, 17, 15, 12, 10 }; + static const u8 Treh[6] = { 30, 15, 15, 10, 10, 7 }; + static const u8 Trc[6] = { 100, 50, 35, 30, 25, 20 }; + static const u8 Trhoh[6] = { 0, 15, 15, 15, 15, 15 }; + static const u8 Trloh[6] = { 0, 0, 0, 0, 5, 5 }; + static const u8 Tcea[6] = { 100, 45, 30, 25, 25, 25 }; + static const u8 Tadl[6] = { 200, 100, 100, 100, 70, 70 }; + static const u8 Trhw[6] = { 200, 100, 100, 100, 100, 100 }; + static const u8 Trhz[6] = { 200, 100, 100, 100, 100, 100 }; + static const u8 Twhr[6] = { 120, 80, 80, 60, 60, 60 }; + static const u8 Tcs[6] = { 70, 35, 25, 25, 20, 15 }; + + u16 en_lo, en_hi; + u16 acc_clks; + u16 dv_window = 0; + u16 addr_2_data; + u16 re_2_we; + u16 re_2_re; + u16 we_2_re; + u16 cs_cnt; + + en_lo = ceil_div(Trp[onfi_mode], CLK_X); + en_hi = ceil_div(Treh[onfi_mode], CLK_X); + + if (en_hi * CLK_X < Treh[onfi_mode] + 2) + ++en_hi; + if (CLK_X * (en_lo + en_hi) < Trc[onfi_mode] + 2) + en_lo += ceil_div(Trc[onfi_mode] - (en_lo + en_hi) * CLK_X, + CLK_X); + + if (en_lo + en_hi < CLK_MULTI) + en_lo += CLK_MULTI - en_lo - en_hi; + + while (1) { + u16 data_invalid_rhoh, data_invalid_rloh, data_invalid; + + data_invalid_rhoh = en_lo * CLK_X + Trhoh[onfi_mode]; + data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[onfi_mode]; + data_invalid = min(data_invalid_rhoh, data_invalid_rloh); + + dv_window = data_invalid - Trea[onfi_mode]; + if (dv_window >= 8) + break; + ++en_lo; + } + + acc_clks = ceil_div(Trea[onfi_mode], CLK_X); + while (acc_clks * CLK_X - Trea[onfi_mode] < 3) + ++acc_clks; + + addr_2_data = ceil_div(Tadl[onfi_mode], CLK_X); + re_2_we = ceil_div(Trhw[onfi_mode], CLK_X); + re_2_re = ceil_div(Trhz[onfi_mode], CLK_X); + we_2_re = ceil_div(Twhr[onfi_mode], CLK_X); + cs_cnt = ceil_div(Tcs[onfi_mode] - Trp[onfi_mode], CLK_X); + if (cs_cnt == 0) + cs_cnt = 1; + + if (Tcea[onfi_mode]) + while (cs_cnt * CLK_X + Trea[onfi_mode] < Tcea[onfi_mode]) + cs_cnt++; + + /* + * apply calculated timings. + */ + dnl_reg_writel(priv, acc_clks, DNL_ACC_CLKS_REG); + dnl_reg_writel(priv, re_2_we, DNL_RE_2_WE_REG); + dnl_reg_writel(priv, re_2_re, DNL_RE_2_RE_REG); + dnl_reg_writel(priv, we_2_re, DNL_WE_2_RE_REG); + dnl_reg_writel(priv, addr_2_data, DNL_ADDR_2_DATA_REG); + dnl_reg_writel(priv, en_lo, DNL_EN_LO_CNT_REG); + dnl_reg_writel(priv, en_hi, DNL_EN_HI_CNT_REG); + dnl_reg_writel(priv, cs_cnt, DNL_CS_SETUP_CNT_REG); +} + +static void dnl_set_slowest_timings(struct denali_nand_priv *priv) +{ + priv->buf_mode = E_BUFMODE_MAP11; + + /* + * use slowest and safest timing possible to read ONFI + * parameter page. we will stay in this mode if we cannot read + * the ONFI parameter page. + */ + dnl_calc_onfi_timings(priv, 0); +} + +static int dnl_configure_timings(struct denali_nand_priv *priv) +{ + struct mtd_info *mtd; + struct nand_chip *nand; + u16 timing_modes; + int mode; + + mtd = priv->mtd; + nand = mtd->priv; + + timing_modes = le16_to_cpu(nand->onfi_params.async_timing_mode); + + /* + * walk bitfield storing supported ONFI timings, use the + * highest available mode. start from fastest possible mode + * (mode 5) and go down until we found one mode that is + * supported. + */ + for (mode = max_mode; mode > 0; --mode) { + if (timing_modes & (1 << mode)) + break; + } + printk(KERN_INFO PFX "using ONFI timing mode %i\n", mode); + dnl_calc_onfi_timings(priv, mode); + + return 0; +} + +static int dnl_reset_bank(struct denali_nand_priv *priv) +{ + u32 reg; + u32 status; + + dnl_clear_all_interrupts(priv); + + /* + * reset controller. + */ + reg = dnl_reg_readl(priv, DNL_DEVICE_RESET_REG); + reg |= (1 << priv->chip_num); + dnl_reg_writel(priv, reg, DNL_DEVICE_RESET_REG); + + /* + * wait for reset completion. + */ + if (dnl_spin_for_mask(priv, DNL_INT_RESET_DONE | DNL_INT_WDOG_TIMEOUT, + &status) < 0) { + printk("timeouted waiting for device reset.\n"); + return -ETIMEDOUT; + } + + if (status & DNL_INT_WDOG_TIMEOUT) { + printk("internal hardware watchdog triggered.\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int err; + struct mtd_info *mtd; + struct nand_chip *nand; + struct denali_nand_priv *priv; + + err = pci_enable_device(dev); + if (err) { + printk(KERN_ERR PFX "unable to enable pci device: %i.\n", err); + return err; + } + + priv = kzalloc(sizeof (*priv), GFP_KERNEL); + if (!priv) { + err = -ENOMEM; + goto out_disable_device; + } + dev_set_drvdata(&dev->dev, priv); + priv->dev = dev; + + /* + * mem zone is on the first pci resource, map xx access is done here. + */ + priv->mem_phys = pci_resource_start(dev, 0); + priv->mem_size = pci_resource_end(dev, 0) - priv->mem_phys + 1; + + /* + * registers are on the second pci resource. + */ + priv->regs_phys = pci_resource_start(dev, 1); + priv->regs_size = pci_resource_end(dev, 1) - priv->regs_phys + 1; + + priv->mem = ioremap(priv->mem_phys, priv->mem_size); + if (!priv->mem) { + err = -ENOMEM; + goto out_free_priv; + } + + priv->regs = ioremap(priv->regs_phys, priv->regs_size); + if (!priv->regs) { + err = -ENOMEM; + goto out_unmap_mem; + } + + mtd = kzalloc(sizeof (*mtd), GFP_KERNEL); + if (!mtd) { + err = -ENOMEM; + goto out_unmap_regs; + } + priv->mtd = mtd; + + nand = kzalloc(sizeof (*nand), GFP_KERNEL); + if (!nand) { + err = -ENOMEM; + goto out_free_mtd; + } + + mtd->priv = nand; + mtd->owner = THIS_MODULE; + + /* + * the chip may support it but the controller makes it a pain + * to handle. + */ + nand->options = NAND_NO_RNDOUT; + + nand->priv = priv; + nand->read_byte = dnl_read_byte; + nand->write_buf = dnl_write_buf; + nand->read_buf = dnl_read_buf; + nand->cmd_ctrl = dnl_cmd_ctrl; + + if (map_mode == 11) { + /* + * always use MAP11 accesses, will be slower, but may be + * usefull for debug. + */ + printk(KERN_INFO PFX "using MAP11 for ALL accesses (slow).\n"); + priv->buf_mode = E_BUFMODE_MAP11; + nand->ecc.mode = NAND_ECC_SOFT; + nand->chip_delay = 35; + + } else { + /* + * use our provided cmdfunc, with the ->ecc callbacks + * along, things will go much more faster. + */ + nand->cmdfunc = dnl_cmdfunc; + + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.read_page_raw = dnl_read_page_raw; + nand->ecc.write_page_raw = dnl_write_page_raw; + nand->ecc.read_oob = dnl_read_oob; + nand->ecc.write_oob = dnl_write_oob; + nand->erase_cmd = dnl_erase_cmd; + } + + dnl_clear_all_interrupts(priv); + dnl_reset_bank(priv); + dnl_set_slowest_timings(priv); + + /* + * enable prefetch on page read, to speed up things. + */ + dnl_reg_writel(priv, 1, DNL_PREFETCH_MODE); + + /* + * disable ECC verification/generation on page read/write. + */ + dnl_reg_writel(priv, 0, DNL_ECC_ENABLE_REG); + + /* + * allocate read buffer: size should be main size + oob + * size. we do not have the mtd fields populated yet with + * these values, but controller registers do already have them + * populated. + */ + priv->read_buf_size = dnl_reg_readl(priv, DNL_MAIN_SIZE_REG) + + dnl_reg_readl(priv, DNL_SPARE_SIZE_REG); + priv->read_buf = kmalloc(2 * 4096, GFP_KERNEL); + if (!priv->read_buf) { + goto out_free_nand; + err = -ENOMEM; + } + + if (pci_set_dma_mask(dev, DMA_BIT_MASK(32)) < 0) { + printk(KERN_ERR PFX "32bit dma not supported.\n"); + goto out_free_read_buf; + } + priv->read_buf_dma = dma_map_single(&dev->dev, priv->read_buf, + priv->read_buf_size, + DMA_BIDIRECTIONAL); + if (dma_mapping_error(&dev->dev, priv->read_buf_dma)) { + printk(PFX KERN_ERR "unable to map read_buf for dma.\n"); + goto out_free_read_buf; + } + + /* + * FIXME: 4 chips can be supported + */ + err = nand_scan_ident(mtd, 1, NULL); + if (err < 0) + goto out_pci_unmap_single; + + if (map_mode != 11) + /* + * FIXME: nand_scan_ident does not preserve our + * erase_cmd. + */ + nand->erase_cmd = dnl_erase_cmd; + + + + err = nand_scan_tail(mtd); + if (err < 0) + goto out_pci_unmap_single; + + + if (nand->onfi_version) + dnl_configure_timings(priv); + + mtd->name = "denali_nand"; + err = mtd_device_parse_register(mtd, parts_parsers, 0, NULL, 0); + if (err) { + printk(KERN_WARNING PFX "unable to register MTD dev.\n"); + goto out_pci_unmap_single; + } + + return 0; + +out_pci_unmap_single: + pci_unmap_single(dev, priv->read_buf_dma, priv->read_buf_size, + PCI_DMA_BIDIRECTIONAL); +out_free_read_buf: + kfree(priv->read_buf); +out_free_nand: + kfree(nand); +out_free_mtd: + kfree(mtd); +out_unmap_regs: + iounmap(priv->regs); +out_unmap_mem: + iounmap(priv->mem); +out_free_priv: + kfree(priv); +out_disable_device: + pci_disable_device(dev); + return err; +} + +static void denali_pci_remove(struct pci_dev *dev) +{ + struct denali_nand_priv *priv; + + priv = dev_get_drvdata(&dev->dev); + + mtd_device_unregister(priv->mtd); + pci_unmap_single(dev, priv->read_buf_dma, priv->read_buf_size, + PCI_DMA_BIDIRECTIONAL); + kfree(priv->read_buf); + kfree(priv->mtd->priv); + kfree(priv->mtd); + + iounmap(priv->regs); + iounmap(priv->mem); + + kfree(priv); + pci_disable_device(dev); +} + +const struct pci_device_id denali_pci_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0701) }, + { 0, }, +}; + +struct pci_driver denali_nand_pci_driver = +{ + .name = "denali_nand", + .id_table = denali_pci_table, + .probe = denali_pci_probe, + .remove = denali_pci_remove, +}; + +static int __init denali_nand_init(void) +{ + int err; + + err = pci_register_driver(&denali_nand_pci_driver); + if (err) { + printk(KERN_ERR PFX "pci_register_driver failed: %i.\n", err); + return err; + } + return 0; +} + +static void __exit denali_nand_exit(void) +{ + pci_unregister_driver(&denali_nand_pci_driver); +} + +module_init(denali_nand_init); +module_exit(denali_nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Nicolas Schichan "); +MODULE_DESCRIPTION("Denali NAND driver"); --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/drivers/mtd/nand/denali_nand.h 2011-01-06 02:17:51.972146751 +0100 @@ -0,0 +1,165 @@ + +#ifndef __DENALI_NAND_H +# define __DENALI_NAND_H + +struct mtd_info; + +enum +{ + E_BUFMODE_MAP01, + E_BUFMODE_MAP11, +}; + +struct denali_nand_priv +{ + int chip_num; + unsigned long regs_phys; + unsigned long regs_size; + + unsigned long mem_phys; + unsigned long mem_size; + + void __iomem *regs; + void __iomem *mem; + + u8 *read_buf; + int read_buf_size; + int read_buf_offset; + int page; + + + int buf_mode; + + dma_addr_t read_buf_dma; + + struct pci_dev *dev; + struct mtd_info *mtd; +}; + +#define DNL_DEVICE_RESET_REG 0x0 + +#define DNL_XFER_SPARE_REG (0x4 * 4) + +#define DNL_CE_REG (0x34 * 4) +#define DNL_CE_DISABLE (1 << 0) + +#define DNL_RB_PIN_ENABLED_REG (0x18 * 4) +# define DNL_RB_PIN_B0_EN (1 << 0) +# define DNL_RB_PIN_B1_EN (1 << 1) +# define DNL_RB_PIN_B2_EN (1 << 2) +# define DNL_RB_PIN_B3_EN (1 << 3) + +#define DNL_PREFETCH_MODE (0x30 * 4) +#define DNL_ECC_ENABLE_REG (0x38 * 4) + +#define DNL_INT_ENABLE_REG (0x3c * 4) +# define DNL_INT_ENABLE (1 << 0) + +#define DNL_MAIN_SIZE_REG (0x5c * 4) +#define DNL_SPARE_SIZE_REG (0x60 * 4) + +#define DNL_0_INTR_STATUS_REG (0x104 * 4) +#define DNL_0_INTR_EN_REG (0x108 * 4) +#define DNL_0_PAGE_COUNT_REG (0x10c * 4) +#define DNL_0_ERR_ADDR_REG (0x110 * 4) +#define DNL_0_ERR_BLOCK_REG (0x114 * 4) + +#define DNL_1_INTR_STATUS_REG (0x118 * 4) +#define DNL_1_INTR_EN_REG (0x11c * 4) +#define DNL_1_PAGE_COUNT_REG (0x120 * 4) +#define DNL_1_ERR_ADDR_REG (0x124 * 4) +#define DNL_1_ERR_BLOCK_REG (0x128 * 4) + +#define DNL_2_INTR_STATUS_REG (0x12c * 4) +#define DNL_2_INTR_EN_REG (0x130 * 4) +#define DNL_2_PAGE_COUNT_REG (0x134 * 4) +#define DNL_2_ERR_ADDR_REG (0x138 * 4) +#define DNL_2_ERR_BLOCK_REG (0x13c * 4) + +#define DNL_3_INTR_STATUS_REG (0x140 * 4) +#define DNL_3_INTR_EN_REG (0x144 * 4) +#define DNL_3_PAGE_COUNT_REG (0x148 * 4) +#define DNL_3_ERR_ADDR_REG (0x14c * 4) +#define DNL_3_ERR_BLOCK_REG (0x150 * 4) + +/* + * interrupt cause bits valid for all 4 controllers. + */ +#define DNL_INT_DMA_DATA_CMD_COMPLETE (1 << 2) +#define DNL_INT_WDOG_TIMEOUT (1 << 3) +#define DNL_INT_PROGRAM_FAIL (1 << 4) +#define DNL_INT_ERASE_FAILED (1 << 5) +#define DNL_INT_LOAD_COMPLETE (1 << 6) +#define DNL_INT_PROGRAM_COMPLETE (1 << 7) +#define DNL_INT_ERASE_COMPLETE (1 << 8) +#define DNL_INT_BAD_CMD_SEQ (1 << 11) +#define DNL_INT_RESET_DONE (1 << 13) + + +#define DNL_SKIP_BYTE_REG (0x8c * 4) +#define DNL_SPACE_AREA_MARKER_REG (0x90 * 4) + +#define DNL_MANUFACTURER_REG (0xc0 * 4) + +#define DNL_PAGE_SIZE (0xd4 * 4) +#define DNL_SPARE_SIZE (0xd8 * 4) + +/* + * timing configuration registers + */ +#define DNL_WE_2_RE_REG (0x40 * 4) +#define DNL_ADDR_2_DATA_REG (0x44 * 4) +#define DNL_RE_2_WE_REG (0x48 * 4) +#define DNL_ACC_CLKS_REG (0x4c * 4) + +#define DNL_EN_LO_CNT_REG (0x7c * 4) +#define DNL_EN_HI_CNT_REG (0x80 * 4) +#define DNL_CS_SETUP_CNT_REG (0x88 * 4) +#define DNL_RE_2_RE_REG (0xa4 * 4) + +#define DNL_XFER_MODE (0x100 * 4) + +#define DNL_DMA_ENABLE (0x1c0 * 4) + +/* + * map xx indirect read/write accessors + */ +#define DNL_MAP_01_MASK 0x04000000 +#define DNL_MAP_10_MASK 0x08000000 +#define DNL_MAP_11_MASK 0x0c000000 + +#define DNL_CHIP_MASK 0x03000000 +#define DNL_CHIP_SHIFT (24) +#define DNL_MAP_11_CMD_MASK (0x0) +#define DNL_MAP_11_ADDR_MASK (0x1) +#define DNL_MAP_11_DATA_MASK (0x2) + +#define DNL_MAP_CTL_REG 0x00 +#define DNL_MAP_DATA_REG 0x10 + +#define DNL_XFER_SPARE_ONLY 0x41 +#define DNL_XFER_MAIN_ONLY 0x42 +#define DNL_XFER_SPARE_AND_MAIN 0x43 + +#define DNL_MAP10_READAHEAD_ONCE 0x2001 + +enum { + DNL_E_DMA_READ, + DNL_E_DMA_PROGRAM, +}; + +#define DNL_MAP10_ERASE_COMMAND 0x1 + +/* + * DMA command sequence. + */ +#define DNL_MAP10_DMA_READ_PAGE 0x2001 +#define DNL_MAP10_DMA_WRITE_PAGE 0x2101 +#define DNL_MAP10_DMA_SET_ADDR_HI 0x2200 +#define DNL_MAP10_DMA_SET_ADDR_LO 0x2300 +#define DNL_MAP10_DMA_SET_PARAMS 0x2400 + +#define DNL_DMA_PARAM_GEN_INT (1 << 16) +#define DNL_DMA_BURST_64 (0x40 << 8) + +#endif /* !__DENALI_NAND_H */ diff -Nruw linux-3.2.13-fbx/drivers/platform/intelce./dfx.c linux-3.2.13-fbx/drivers/platform/intelce/dfx.c --- linux-3.2.13-fbx/drivers/platform/intelce./dfx.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/intelce/dfx.c 2011-11-04 14:26:08.943891252 +0100 @@ -0,0 +1,286 @@ +/* + * Intel CE DFX fuse SysFS export + * + * Copyright (C) 2009, Florian Fainelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +#define DFX_IO_SIZE (64 * 1024) +#define PFX KBUILD_MODNAME + +#define DFX_ID_CODE 0x24 +#define DFX_SKU 0x28 +#define DFX_SN1 0x40 +#define DFX_SN2 0x44 +#define DFX_VCFG 0x64 + +#define CW_CFG_BASE 0xA0000010 +#define DDR_SPEED 0x4 + +#define CW_BRD_MASK 0x3 +#define CW_SEC_BOOT 7 +#define CW_VDAC_CAL 14 + +#define DDR_SPEED_MASK 0x7 + +static void __iomem *dfx_base; +static void __iomem *cw_cfg_base; + +static ssize_t show_fuse_id_code(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + return sprintf(buf, "%04x\n", + ioread32(dfx_base + DFX_ID_CODE) >> 19 & 0xf); +} + +static ssize_t show_sku_id(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + return sprintf(buf, "%06x\n", ioread32(dfx_base + DFX_SKU) & 0x7f); +} + +static ssize_t show_dev_serial1(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + return sprintf(buf, "%08x\n", ioread32(dfx_base + DFX_SN1)); +} + +static ssize_t show_dev_serial2(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + return sprintf(buf, "%08x\n", ioread32(dfx_base + DFX_SN2)); +} + +static ssize_t show_ca_vendor_cfg(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + u32 vcfg = ioread32(dfx_base + DFX_VCFG); + + return sprintf(buf, "%2x%2x\n", (vcfg >> 10) & 0xff, vcfg & 0xff); +} + +static DEVICE_ATTR(fuse_id_code, S_IRUGO, show_fuse_id_code, NULL); +static DEVICE_ATTR(sku_id, S_IRUGO, show_sku_id, NULL); +static DEVICE_ATTR(dev_serial1, S_IRUGO, show_dev_serial1, NULL); +static DEVICE_ATTR(dev_serial2, S_IRUGO, show_dev_serial2, NULL); +static DEVICE_ATTR(ca_vendor_cfg, S_IRUGO, show_ca_vendor_cfg, NULL); + +#define CW_SHOW_ATTR(_name, _bit) \ +static ssize_t show_##_name(struct device *dev, struct device_attribute \ + *devattr, char *buf) \ +{ \ + return sprintf(buf, "%d\n", (readl(cw_cfg_base) & \ + (1 << _bit)) >> _bit); \ +} \ +static DEVICE_ATTR(_name, S_IRUGO, show_##_name, NULL); \ + +CW_SHOW_ATTR(trusted_mode, CW_SEC_BOOT); +CW_SHOW_ATTR(vdac_cal, CW_VDAC_CAL); + +static ssize_t show_board_model(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + u32 val = readl(cw_cfg_base) & CW_BRD_MASK; + const char *board; + + switch (val) { + case 0: + board = "GoldenBeach"; + break; + case 1: + board = "ChesapeakeBay"; + break; + case 2: + board = "FalconFalls"; + break; + case 3: + board = "PowerHouseLake"; + break; + default: + board = "unknown"; + break; + } + + return sprintf(buf, "%s\n", board); +} + +static DEVICE_ATTR(board_model, S_IRUGO, show_board_model, NULL); + +static ssize_t show_ddr_type(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + u32 speed = (readl(cw_cfg_base + DDR_SPEED) >> 6) & DDR_SPEED_MASK; + const char *type; + const char *freq; + + if (speed >= 4) + type = "DDR2"; + else + type = "DDR3"; + + switch (speed) { + case 0: + freq = "800"; + break; + case 1: + freq = "1066"; + break; + case 2: + freq = "1333"; + break; + case 3: + freq = "1600"; + break; + case 4: + freq = "800"; + break; + default: + freq = "unknown"; + break; + } + + return sprintf(buf, "%s (%s Mhz)\n", type, freq); +} + +static DEVICE_ATTR(ddr_type, S_IRUGO, show_ddr_type, NULL); + +static struct attribute *intelce_dfx_attributes[] = { + &dev_attr_fuse_id_code.attr, + &dev_attr_sku_id.attr, + &dev_attr_dev_serial1.attr, + &dev_attr_dev_serial2.attr, + &dev_attr_ca_vendor_cfg.attr, + &dev_attr_trusted_mode.attr, + &dev_attr_vdac_cal.attr, + &dev_attr_board_model.attr, + &dev_attr_ddr_type.attr, + NULL +}; + +static const struct attribute_group intelce_dfx_group = { + .name = "intelce-dfx", + .attrs = intelce_dfx_attributes, +}; + +static int __devinit intelce_dfx_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int err; + int bar = 0; + + err = pci_enable_device(pdev); + if (err) + goto err_out; + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + printk(KERN_ERR PFX ": 32-bit PCI DMA addresses" + "not supported by the card\n"); + goto err_out; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + printk(KERN_ERR PFX ": 32-bit PCI DMA addresses" + "not supported by the card\n"); + goto err_out; + } + + if (pci_resource_len(pdev, bar) < DFX_IO_SIZE) { + printk(KERN_ERR PFX ": Insufficient PCI resources, aborting\n"); + err = -EIO; + goto err_out; + } + + pci_set_master(pdev); + + err = pci_request_regions(pdev, PFX); + if (err) { + printk(KERN_ERR PFX ": could not request PCI regions\n"); + err = -EIO; + goto err_out; + } + + dfx_base = pci_iomap(pdev, bar, DFX_IO_SIZE); + if (!dfx_base) { + printk(KERN_ERR PFX ": ioremap failed for device: %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_release_regions; + } + + cw_cfg_base = ioremap(CW_CFG_BASE, 0x7); + if (!cw_cfg_base) { + printk(KERN_ERR PFX ": ioremap for CW[] failed\n"); + err = -ENOMEM; + goto err_iounmap; + } + + pci_set_drvdata(pdev, dfx_base); + + err = sysfs_create_group(&pdev->dev.kobj, &intelce_dfx_group); + if (err) { + printk(KERN_ERR PFX ": unable to create sysfs group\n"); + goto err_iounmap; + } + + dev_info(&pdev->dev, "at 0x%p\n", dfx_base); + + return 0; + +err_iounmap: + iounmap(cw_cfg_base); + pci_iounmap(pdev, dfx_base); +err_release_regions: + pci_release_regions(pdev); +err_out: + return err; +} + +static void __exit intelce_dfx_remove(struct pci_dev *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &intelce_dfx_group); + iounmap(cw_cfg_base); + pci_iounmap(pdev, dfx_base); + pci_set_drvdata(pdev, NULL); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id intelce_dfx_id_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6d) }, + { 0 } +}; + +static struct pci_driver intelce_dfx_driver = { + .name = "intelce-dfx", + .id_table = intelce_dfx_id_tbl, + .probe = intelce_dfx_probe, + .remove = __devexit_p(intelce_dfx_remove), +}; + +static int __init intelce_dfx_init(void) +{ + return pci_register_driver(&intelce_dfx_driver); +} + +static void __exit intelce_dfx_exit(void) +{ + pci_unregister_driver(&intelce_dfx_driver); +} + +module_init(intelce_dfx_init); +module_exit(intelce_dfx_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("Intel CE 3100/4100 sysfs fuse reporting"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); diff -Nruw linux-3.2.13-fbx/drivers/platform/intelce./gpio-intelce.c linux-3.2.13-fbx/drivers/platform/intelce/gpio-intelce.c --- linux-3.2.13-fbx/drivers/platform/intelce./gpio-intelce.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/intelce/gpio-intelce.c 2012-07-27 18:10:46.268136945 +0200 @@ -0,0 +1,590 @@ +/* + * GPIO bus driver for the Intel CE3100/4100 SoC + * + * Copyright (C) 2009, Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "intelce-gpio" +#define DRV_VERSION "0.1" + +#define GEN3_GPIO_IO_BASE 0x1080 +#define GEN3_GPIO_IO_SIZE 0x40 +#define GEN3_NUM_GPIO_PINS 26 + +#define NR_BUILTIN_GPIO GEN3_NUM_GPIO_PINS +#define GEN3_GPIO_GROUPS 4 + +/* Starting point for the different GPIO groups on intel_gen3 */ +#define GEN3_GPIO_GROUP_ZERO 0 +#define GEN3_GPIO_GROUP_ONE 12 +#define GEN3_GPIO_GROUP_TWO 15 +#define GEN3_GPIO_GROUP_THREE 22 + +/* GPIO Group 0 */ +#define GEN3_GPIO0_GPOUTR 0x00 +#define GEN3_GPIO0_GPOER 0x04 +#define GEN3_GPIO0_GPINR 0x08 +#define GEN3_GPIO0_GPSTR 0x0C +#define GEN3_GPIO0_GPIT1R0 0x10 +#define GEN3_GPIO0_INT 0x14 +#define GEN3_GPIO0_GPIT1R1 0x18 +#define GEN3_GPIO0_MUX_CNTL 0x1C + +/* GPIO Group 1*/ +#define GEN3_GPIO1_CGEN 0x00 +#define GEN3_GPIO1_CGIO 0x04 +#define GEN3_GPIO1_CGLV 0x08 +#define GEN3_GPIO1_CGTPE 0x0C +#define GEN3_GPIO1_CGTNE 0x10 +#define GEN3_GPIO1_CGGPE 0x14 +#define GEN3_GPIO1_CGSMI 0x18 +#define GEN3_GPIO1_CGTS 0x1C + +/* GPIO Group 2 */ +#define GEN3_GPIO2_CGEN 0x00 +#define GEN3_GPIO2_CGIO 0x04 +#define GEN3_GPIO2_CGLV 0x08 +#define GEN3_GPIO2_CGTPE 0x0C +#define GEN3_GPIO2_CGTNE 0x10 +#define GEN3_GPIO2_CGGPE 0x14 +#define GEN3_GPIO2_CGSMI 0x18 +#define GEN3_GPIO2_CGTS 0x1C +#define GEN3_GPIO2_MUX_CNTL 0x1C + +/* GPIO Group 3 */ +#define GEN3_GPIO3_CGEN 0x20 +#define GEN3_GPIO3_CGIO 0x24 +#define GEN3_GPIO3_CGLV 0x28 +#define GEN3_GPIO3_CGTPE 0x2C +#define GEN3_GPIO3_CGTNE 0x30 +#define GEN3_GPIO3_CGGPE 0x34 +#define GEN3_GPIO3_CGSMI 0x38 +#define GEN3_GPIO3_CGTS 0x3C + +/* Controller limits */ +#define INTELCE_GPIO_IO_SIZE 256 + +#define GEN3_TYPE_PCI 0 +#define GEN3_TYPE_IOPORT 1 + +/* gpio adapter private structure */ +struct intelce_gpio { + struct gpio_chip chip; + struct pci_dev *pdev; + void __iomem *base; + u32 ioport; + unsigned int type:1; +}; + +/* Group 0 GPIO helpers */ +static void intelce_gpio0_set_direction(struct gpio_chip *chip, + unsigned offset, int direction) +{ + u32 mask; + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + mask = ioread32(gpch->base + GEN3_GPIO0_GPOER); + if (direction) + mask |= (1 << offset); + else + mask &= ~(1 << offset); + iowrite32(mask, gpch->base + GEN3_GPIO0_GPOER); +} + +static void intelce_gpio0_set_alt_func(struct gpio_chip *chip, + unsigned offset, int func) +{ + struct intelce_gpio *gpch; + unsigned bit; + u32 mask; + gpch = container_of(chip, struct intelce_gpio, chip); + + if (offset <= 5) + bit = 0; + else if (offset <= 7) + bit = 1; + else + bit = 2; + + /* Set functionnality */ + mask = ioread32(gpch->base + GEN3_GPIO0_MUX_CNTL); + if (func) + mask |= (1 << bit); + else + mask &= ~(1 << bit); + iowrite32(mask, gpch->base + GEN3_GPIO0_MUX_CNTL); +} + +/* + * GPIO lib stubs + * Note that you should call the direction + * helpers first which will set the muxing + * correctly + */ +static void intelce_gpio0_set_dataout(struct gpio_chip *chip, + unsigned offset, int value) +{ + u32 mask; + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + mask = ioread32(gpch->base + GEN3_GPIO0_GPOUTR); + if (value) + mask |= (1 << offset); + else + mask &= ~(1 << offset); + iowrite32(mask, gpch->base + GEN3_GPIO0_GPOUTR); +} + +static int intelce_gpio0_get_datain(struct gpio_chip *chip, + unsigned offset) +{ + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + return ioread32(gpch->base + GEN3_GPIO0_GPINR) & (1 << offset); +} + +static int intelce_gpio0_set_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + /* Disable GPIO muxing */ + intelce_gpio0_set_alt_func(chip, offset, 0); + intelce_gpio0_set_direction(chip, offset, 0); + return 0; +} + +static int intelce_gpio0_set_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + /* Disable GPIO muxing */ + intelce_gpio0_set_alt_func(chip, offset, 0); + intelce_gpio0_set_direction(chip, offset, 1); + intelce_gpio0_set_dataout(chip, offset, value); + return 0; +} + +/* Group 1 GPIO helpers */ +static int intelce_gpio1_get_datain(struct gpio_chip *chip, + unsigned offset) +{ + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + return inl(gpch->ioport + GEN3_GPIO1_CGLV) & (1 << offset); +} + +static void intelce_gpio1_set_dataout(struct gpio_chip *chip, + unsigned offset, int value) +{ + u32 mask; + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + mask = inl(gpch->ioport + GEN3_GPIO1_CGLV); + if (value) + mask |= (1 << offset); + else + mask &= ~(1 << offset); + outl(mask, gpch->ioport + GEN3_GPIO1_CGLV); +} + +static void intelce_gpio1_set_direction(struct gpio_chip *chip, + unsigned offset, int direction) +{ + u32 mask; + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + /* Set the correct GPIO mode (no muxing) */ + mask = inl(gpch->ioport + GEN3_GPIO1_CGEN); + mask |= (1 << offset); + outl(mask, gpch->ioport + GEN3_GPIO1_CGEN); + + /* Set direction (0 = input, 1 = output) */ + mask = inl(gpch->ioport + GEN3_GPIO1_CGIO); + if (direction) + mask &= ~(1 << offset); + else + mask |= (1 << offset); + outl(mask, gpch->ioport + GEN3_GPIO1_CGIO); +} + +static int intelce_gpio1_set_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + intelce_gpio1_set_direction(chip, offset, 0); + return 0; +} + +static int intelce_gpio1_set_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + intelce_gpio1_set_direction(chip, offset, 1); + intelce_gpio1_set_dataout(chip, offset, value); + return 0; +} + +/* Group 2 GPIO helpers */ +static void intelce_gpio2_set_dataout(struct gpio_chip *chip, + unsigned offset, int value) +{ + /* Rework base to call GPIO group 1 functions */ + offset += chip->base - GEN3_GPIO_GROUP_ONE; + intelce_gpio1_set_dataout(chip, offset, value); +} + +static int intelce_gpio2_get_datain(struct gpio_chip *chip, + unsigned offset) +{ + /* Rework base to call GPIO group 1 functions */ + offset += chip->base - GEN3_GPIO_GROUP_ONE; + return intelce_gpio1_get_datain(chip, offset); +} + +/* + * set a gpio offset to alternate function (func = 1) + * or gpio mode (func = 0) + */ +static void intelce_gpio2_set_alt_func(struct gpio_chip *chip, + unsigned offset, int func) +{ + u32 mask, bit_num; + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + /* Clear or set the port GPIO mode */ + mask = inl(gpch->ioport + GEN3_GPIO2_CGEN); + if (func) + mask &= ~(1 << offset); + else + mask |= (1 << offset); + outl(mask, gpch->ioport + GEN3_GPIO2_CGEN); + + /* Set alternate function, + * we need to recompute the base number */ + offset += (chip->base + 3); + if (offset <= 4) + bit_num = 3; + else if (offset <= 7) + bit_num = 4; + else if (offset == 8) + bit_num = 5; + else + bit_num = 6; + + mask = inl(gpch->ioport + GEN3_GPIO2_MUX_CNTL); + if (func) + mask |= (1 << bit_num); + else + mask &= ~(1 << bit_num); + outl(mask, gpch->ioport + GEN3_GPIO2_MUX_CNTL); +} + +static void intelce_gpio2_set_direction(struct gpio_chip *chip, + unsigned offset, int direction) +{ + /* Set to no alternate function */ + intelce_gpio2_set_alt_func(chip, offset, 0); + /* Use GPIO group 1 method here */ + offset += chip->base - GEN3_GPIO_GROUP_ONE; + intelce_gpio1_set_direction(chip, offset, direction); +} + +static int intelce_gpio2_set_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + intelce_gpio2_set_direction(chip, offset, 0); + return 0; +} + +static int intelce_gpio2_set_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + intelce_gpio2_set_direction(chip, offset, 1); + intelce_gpio2_set_dataout(chip, offset, value); + return 0; +} + +/* Group 3 GPIO helpers */ +static void intelce_gpio3_set_dataout(struct gpio_chip *chip, + unsigned offset, int value) +{ + u32 mask; + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + mask = inl(gpch->ioport + GEN3_GPIO3_CGLV); + if (value) + mask |= (1 << offset); + else + mask &= ~(1 << offset); + outl(mask, gpch->ioport + GEN3_GPIO3_CGLV); +} + +static int intelce_gpio3_get_datain(struct gpio_chip *chip, + unsigned offset) +{ + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + return inl(gpch->ioport + GEN3_GPIO3_CGLV) & (1 << offset); +} + +static void intelce_gpio3_set_direction(struct gpio_chip *chip, + unsigned offset, int direction) +{ + u32 mask; + struct intelce_gpio *gpch; + gpch = container_of(chip, struct intelce_gpio, chip); + + /* Set GPIO mode */ + mask = inl(gpch->ioport + GEN3_GPIO3_CGEN); + mask |= (1 << offset); + outl(mask, gpch->ioport + GEN3_GPIO3_CGEN); + + /* Set direction */ + mask = inl(gpch->ioport + GEN3_GPIO3_CGIO); + if (direction) + mask &= ~(1 << offset); + else + mask |= (1 << offset); + outl(mask, gpch->ioport + GEN3_GPIO3_CGIO); +} + +static int intelce_gpio3_set_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + intelce_gpio3_set_direction(chip, offset, 0); + return 0; +} + +static int intelce_gpio3_set_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + intelce_gpio3_set_direction(chip, offset, 1); + intelce_gpio3_set_dataout(chip, offset, value); + return 0; +} + +/* Array of gpio chips */ +static struct intelce_gpio intelce_gpio_chips[] = { + /* GPIO group 0 */ + { + .chip = { + .label = "intelce-gpio0", + .set = intelce_gpio0_set_dataout, + .get = intelce_gpio0_get_datain, + .direction_input = intelce_gpio0_set_direction_input, + .direction_output = intelce_gpio0_set_direction_output, + .base = GEN3_GPIO_GROUP_ZERO, + .ngpio = GEN3_GPIO_GROUP_ONE, + } + }, + /* GPIO group 1 */ + { + .chip = { + .label = "intelce-gpio1", + .set = intelce_gpio1_set_dataout, + .get = intelce_gpio1_get_datain, + .direction_input = intelce_gpio1_set_direction_input, + .direction_output = intelce_gpio1_set_direction_output, + .base = GEN3_GPIO_GROUP_ONE, + .ngpio = GEN3_GPIO_GROUP_TWO - GEN3_GPIO_GROUP_ONE, + } + }, + /* GPIO group 2 */ + { + .chip = { + .label = "intelce-gpio2", + .set = intelce_gpio2_set_dataout, + .get = intelce_gpio2_get_datain, + .direction_input = intelce_gpio2_set_direction_input, + .direction_output = intelce_gpio2_set_direction_output, + .base = GEN3_GPIO_GROUP_TWO, + .ngpio = GEN3_GPIO_GROUP_THREE - GEN3_GPIO_GROUP_TWO, + } + }, + /* GPIO group 3 */ + { + .chip = { + .label = "intelce-gpio3", + .set = intelce_gpio3_set_dataout, + .get = intelce_gpio3_get_datain, + .direction_input = intelce_gpio3_set_direction_input, + .direction_output = intelce_gpio3_set_direction_output, + .base = GEN3_GPIO_GROUP_THREE, + .ngpio = GEN3_NUM_GPIO_PINS - GEN3_GPIO_GROUP_THREE, + } + }, +}; + +/* We match on a PCI bus device even to driver GPIO at 0x1080 */ +static int __devinit intelce_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err, io_size = INTELCE_GPIO_IO_SIZE; + int bar = 0, i; + void __iomem *ioaddr; + + err = pci_enable_device(pdev); + if (err) + goto err_out; + + /* this should always be supported */ + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + printk(KERN_ERR DRV_NAME ": 32-bit PCI DMA addresses" + "not supported by the card\n"); + goto err_out; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + printk(KERN_ERR DRV_NAME ": 32-bit PCI DMA addresses" + "not supported by the card\n"); + goto err_out; + } + + /* IO Size check */ + if (pci_resource_len(pdev, bar) < io_size) { + printk(KERN_ERR DRV_NAME ": Insufficient PCI resources, aborting\n"); + err = -EIO; + goto err_out; + } + + pci_set_master(pdev); + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + printk(KERN_ERR DRV_NAME ": failed to request PCI region\n"); + goto err_out; + } + + ioaddr = pci_iomap(pdev, bar, io_size); + if (!ioaddr) { + printk(KERN_ERR DRV_NAME ": ioremap failed for device: %s\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_release_pci_region; + } + + if (!request_region(GEN3_GPIO_IO_BASE, GEN3_GPIO_IO_SIZE, DRV_NAME)) { + printk(KERN_ERR DRV_NAME ": failed to request IO port region\n"); + err = -ENOMEM; + goto err_release_pci_region; + } + + pci_set_drvdata(pdev, intelce_gpio_chips); + + intelce_gpio_chips[0].base = ioaddr; + intelce_gpio_chips[0].pdev = pdev; + + /* Register our gpio chips */ + for (i = 0; i < GEN3_GPIO_GROUPS; i++) { + /* Set IO base for gpio chips 1 to 3 */ + if (i > 0) { + intelce_gpio_chips[i].ioport = GEN3_GPIO_IO_BASE; + intelce_gpio_chips[i].pdev = pdev; + intelce_gpio_chips[i].type = GEN3_TYPE_IOPORT; + } + + /* Register our gpio chip */ + err = gpiochip_add(&intelce_gpio_chips[i].chip); + if (err) { + printk(KERN_ERR DRV_NAME ": failed to register chip %d\n", i); + goto err_drvdata; + } + printk(KERN_INFO DRV_NAME ": registered %s at 0x%08x (%s, %d GPIOs)\n", + intelce_gpio_chips[i].chip.label, + intelce_gpio_chips[i].type ? + intelce_gpio_chips[i].ioport : + (u32)intelce_gpio_chips[i].base, + intelce_gpio_chips[i].type ? "IO port" : "PCI", + intelce_gpio_chips[i].chip.ngpio); + } + + return 0; + +err_drvdata: + pci_set_drvdata(pdev, NULL); + pci_iounmap(pdev, ioaddr); + release_region(GEN3_GPIO_IO_BASE, GEN3_GPIO_IO_SIZE); +err_release_pci_region: + pci_release_regions(pdev); +err_out: + return err; +} + +static void __exit intelce_gpio_remove(struct pci_dev *pdev) +{ + int i; + + for (i = 0; i < GEN3_GPIO_GROUPS; i++) + gpiochip_remove(&intelce_gpio_chips[i].chip); + + release_region(GEN3_GPIO_IO_BASE, GEN3_GPIO_IO_SIZE); + pci_iounmap(pdev, intelce_gpio_chips[0].base); + pci_set_drvdata(pdev, NULL); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id intelce_gpio_id_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e67) }, + { 0 } +}; + +static struct pci_driver intelce_gpio_driver = { + .name = DRV_NAME, + .id_table = intelce_gpio_id_tbl, + .probe = intelce_gpio_probe, + .remove = __devexit_p(intelce_gpio_remove), +}; + +static int __init intelce_gpio_init(void) +{ + return pci_register_driver(&intelce_gpio_driver); +} + +static void __exit intelce_gpio_exit(void) +{ + pci_unregister_driver(&intelce_gpio_driver); +} + +module_init(intelce_gpio_init); +module_exit(intelce_gpio_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("GPIO driver for the Intel CE3100/4100 SoC"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); diff -Nruw linux-3.2.13-fbx/drivers/platform/intelce./Kconfig linux-3.2.13-fbx/drivers/platform/intelce/Kconfig --- linux-3.2.13-fbx/drivers/platform/intelce./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/intelce/Kconfig 2011-11-04 14:26:08.939891247 +0100 @@ -0,0 +1,18 @@ +# +# IntelCE devices configuration +# + +menu "IntelCE devices" + +config INTELCE_GPIO + tristate "GPIO support" + select ARCH_REQUIRE_GPIOLIB + ---help--- + IntelCE 3100/4100 GPIO support. + +config INTELCE_DFX + tristate "DFX reporting support" + ---help--- + IntelCE 3100/4100 DFX fuse reporting support. + +endmenu diff -Nruw linux-3.2.13-fbx/drivers/platform/intelce./Makefile linux-3.2.13-fbx/drivers/platform/intelce/Makefile --- linux-3.2.13-fbx/drivers/platform/intelce./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/intelce/Makefile 2011-11-04 14:26:08.939891247 +0100 @@ -0,0 +1,2 @@ +obj-$(CONFIG_INTELCE_GPIO) += gpio-intelce.o +obj-$(CONFIG_INTELCE_DFX) += dfx.o diff -Nruw linux-3.2.13-fbx/drivers/platform/tango2./Kconfig linux-3.2.13-fbx/drivers/platform/tango2/Kconfig --- linux-3.2.13-fbx/drivers/platform/tango2./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/tango2/Kconfig 2011-01-06 02:17:53.032183471 +0100 @@ -0,0 +1,30 @@ +# +# TANGO2 devices configuration +# + +menu "Tango2 devices" + depends on TANGO2 + +config TANGO2_FIP + tristate "Front panel support" + select INPUT + ---help--- + Tango2 FIP front panel support. + +config TANGO2_GPIO + tristate "GPIO sysfs support" + ---help--- + Export GPIO attributes in sysfs. + +config TANGO2_IR + tristate "IR support" + ---help--- + Tango2 IR (NEC/RC5/RC6) support. + +config TANGO2_FB + tristate "Framebuffer support" + depends on FB + ---help--- + Tango2 framebuffer support. + +endmenu diff -Nruw linux-3.2.13-fbx/drivers/platform/tango2./Makefile linux-3.2.13-fbx/drivers/platform/tango2/Makefile --- linux-3.2.13-fbx/drivers/platform/tango2./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/drivers/platform/tango2/Makefile 2011-01-06 02:17:53.032183471 +0100 @@ -0,0 +1,6 @@ +# Makefile for the TANGO2 device drivers + +obj-$(CONFIG_TANGO2_FIP) += fip.o +obj-$(CONFIG_TANGO2_GPIO) += gpio.o +obj-$(CONFIG_TANGO2_IR) += ir.o +obj-$(CONFIG_TANGO2_FB) += fb.o --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/fs/ramfs/xattr.c 2012-11-30 16:07:20.038641711 +0100 @@ -0,0 +1,199 @@ +/* + * xattr.c for ramfs + * Created by on Wed Aug 8 11:57:18 2007 + * Freebox SA + */ + +#include +#include +#include +#include + +#include "internal.h" + +void ramfs_inode_purge_xattrs(struct ramfs_inode_info *rii) +{ + (void)rii; +#ifdef CONFIG_RAMFS_XATTR_USER + while (!list_empty(&rii->xattr_user_list)) { + struct list_head *head; + struct ramfs_xattr *elem; + + + head = rii->xattr_user_list.next; + elem = list_entry(head, struct ramfs_xattr, list); + list_del(head); + kfree(elem->data); + kfree(elem->name); + kfree(elem); + } +#endif + +} + +#ifdef CONFIG_RAMFS_XATTR_USER +static size_t ramfs_xattr_user_list(struct dentry *dentry, char *list, + size_t list_size, + const char *name, size_t namelen, + int handler_flags) +{ + struct ramfs_inode_info *rii; + struct list_head *it; + struct inode *inode = dentry->d_inode; + int ret; + char *ptr; + char *end; + + ret = 0; + ptr = list; + end = list + list_size; + rii = RAMFS_I(inode); + + list_for_each(it, &rii->xattr_user_list) { + struct ramfs_xattr *elem; + int name_len; + + elem = list_entry(it, struct ramfs_xattr, list); + name_len = strlen(elem->name); + + if (ptr + name_len + 1 + XATTR_USER_PREFIX_LEN >= end) + break; + + /* copy prefix in buffer */ + memcpy(ptr, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN); + ptr += XATTR_USER_PREFIX_LEN; + ret += XATTR_USER_PREFIX_LEN; + + /* copy attribute name in buffer */ + memcpy(ptr, elem->name, name_len + 1); + ptr += name_len + 1; + ret += name_len + 1; + } + + return ret; +} + +static struct ramfs_xattr *ramfs_xattr_find(struct ramfs_inode_info *rii, + const char *name) +{ + struct list_head *it; + + list_for_each(it, &rii->xattr_user_list) { + struct ramfs_xattr *elem; + + elem = list_entry(it, struct ramfs_xattr, list); + if (!strcmp(elem->name, name)) + return elem; + } + return NULL; +} + +static int ramfs_xattr_user_remove(struct inode *inode, const char *name) +{ + struct ramfs_inode_info *rii; + struct ramfs_xattr *elem; + + rii = RAMFS_I(inode); + elem = ramfs_xattr_find(rii, name); + if (!elem) + return -ENODATA; + + list_del(&elem->list); + kfree(elem->data); + kfree(elem->name); + kfree(elem); + + return 0; +} + +static int ramfs_xattr_user_set(struct dentry *dentry, const char *name, + const void *buffer, size_t size, int flags, + int handler_flags) +{ + int error; + struct ramfs_xattr *elem; + struct ramfs_inode_info *rii; + struct inode *inode = dentry->d_inode; + int new_elem; + + if (buffer == NULL && size == 0) + return ramfs_xattr_user_remove(inode, name); + + rii = RAMFS_I(inode); + elem = ramfs_xattr_find(rii, name); + if (elem) { + new_elem = 0; + if (flags & XATTR_CREATE) + return -EEXIST; + kfree(elem->data); + elem->data = NULL; + } else { + new_elem = 1; + if (flags & XATTR_REPLACE) + return -ENODATA; + elem = kzalloc(sizeof (*elem), GFP_KERNEL); + if (!elem) + return -ENOMEM; + elem->name = kstrdup(name, GFP_KERNEL); + if (!elem->name) { + kfree(elem); + return -ENOMEM; + } + } + + elem->data = kmalloc(size, GFP_KERNEL); + if (!elem->data) { + error = -ENOMEM; + goto out_free_new_elem; + } + memcpy(elem->data, buffer, size); + elem->data_len = size; + + if (new_elem) + list_add(&elem->list, &rii->xattr_user_list); + + return 0; + + out_free_new_elem: + if (elem && new_elem) { + if (elem->name) + kfree(elem->name); + kfree(elem); + } + return error; +} + +static int ramfs_xattr_user_get(struct dentry *dentry, const char *name, + void *buffer, size_t size, int handler_flags) +{ + struct ramfs_xattr *elem; + struct ramfs_inode_info *rii; + struct inode *inode = dentry->d_inode; + int copylen; + + rii = RAMFS_I(inode); + elem = ramfs_xattr_find(rii, name); + if (elem == NULL) + return -ENODATA; + copylen = elem->data_len; + + if (size < copylen) + copylen = size; + memcpy(buffer, elem->data, copylen); + return copylen; +} + +static struct xattr_handler ramfs_user_handler = { + .prefix = XATTR_USER_PREFIX, + .list = ramfs_xattr_user_list, + .get = ramfs_xattr_user_get, + .set = ramfs_xattr_user_set, +}; +#endif + +const struct xattr_handler *ramfs_xattr_handlers[] = { +#ifdef CONFIG_RAMFS_XATTR_USER + &ramfs_user_handler, +#endif + NULL, +}; --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/crash_zone.h 2013-06-13 15:06:42.798517114 +0200 @@ -0,0 +1,18 @@ +#ifndef CRASH_ZONE_H +#define CRASH_ZONE_H + +#define CRASH_MAGIC 0xa7cecd6a + +struct crash_header +{ + unsigned int magic; + unsigned int len; + unsigned short checksum; + unsigned char data; +}; + +void __init crash_zone_set_param(unsigned char *zone, unsigned int size); + +int __init crash_zone_of_init(void); + +#endif /* ! CRASH_ZONE_H */ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/fbxatm.h 2013-06-13 15:06:42.802517113 +0200 @@ -0,0 +1,155 @@ +/* + * Generic fbxatm definition, exported to userspace + */ +#ifndef LINUX_FBXATM_H_ +#define LINUX_FBXATM_H_ + +#include +#include + +#define FBXATM_IOCTL_MAGIC 0xd3 + +/* allow userspace usage without up to date kernel headers */ +#ifndef PF_FBXATM +#define PF_FBXATM 32 +#define AF_FBXATM PF_FBXATM +#endif + +struct fbxatm_vcc_id { + int dev_idx; + __u32 vpi; + __u32 vci; +}; + +enum fbxatm_vcc_user { + FBXATM_VCC_USER_NONE = 0, + FBXATM_VCC_USER_2684, + FBXATM_VCC_USER_PPPOA, +}; + +enum fbxatm_vcc_traffic_class { + FBXATM_VCC_TC_UBR_NO_PCR = 0, + FBXATM_VCC_TC_UBR, +}; + +struct fbxatm_vcc_qos { + __u32 traffic_class; + __u32 max_sdu; + __u32 max_buffered_pkt; + __u32 priority; + __u32 rx_priority; +}; + + +/* + * VCC related + */ +struct fbxatm_vcc_params { + /* ADD/DEL/GET */ + struct fbxatm_vcc_id id; + + /* ADD/GET */ + struct fbxatm_vcc_qos qos; + + /* GET */ + enum fbxatm_vcc_user user; +}; + +#define FBXATM_IOCADD _IOW(FBXATM_IOCTL_MAGIC, 1, \ + struct fbxatm_vcc_params) + +#define FBXATM_IOCDEL _IOR(FBXATM_IOCTL_MAGIC, 2, \ + struct fbxatm_vcc_params) + +#define FBXATM_IOCGET _IOWR(FBXATM_IOCTL_MAGIC, 3, \ + struct fbxatm_vcc_params) + + +struct fbxatm_vcc_drop_params { + struct fbxatm_vcc_id id; + unsigned int drop_count; +}; + +#define FBXATM_IOCDROP _IOWR(FBXATM_IOCTL_MAGIC, 5, \ + struct fbxatm_vcc_drop_params) + +/* + * OAM related + */ +enum fbxatm_oam_ping_type { + FBXATM_OAM_PING_SEG_F4 = 0, + FBXATM_OAM_PING_SEG_F5, + FBXATM_OAM_PING_E2E_F4, + FBXATM_OAM_PING_E2E_F5, +}; + +struct fbxatm_oam_ping_req { + /* only dev_idx for F4 */ + struct fbxatm_vcc_id id; + + __u8 llid[16]; + enum fbxatm_oam_ping_type type; +}; + +#define FBXATM_IOCOAMPING _IOWR(FBXATM_IOCTL_MAGIC, 10, \ + struct fbxatm_oam_ping_req) + + +/* + * PPPOA related + */ +enum fbxatm_pppoa_encap { + FBXATM_EPPPOA_AUTODETECT = 0, + FBXATM_EPPPOA_VCMUX, + FBXATM_EPPPOA_LLC, +}; + +struct fbxatm_pppoa_vcc_params { + struct fbxatm_vcc_id id; + __u32 encap; + __u32 cur_encap; +}; + +#define FBXATM_PPPOA_IOCADD _IOW(FBXATM_IOCTL_MAGIC, 20, \ + struct fbxatm_pppoa_vcc_params) + +#define FBXATM_PPPOA_IOCDEL _IOW(FBXATM_IOCTL_MAGIC, 21, \ + struct fbxatm_pppoa_vcc_params) + +#define FBXATM_PPPOA_IOCGET _IOWR(FBXATM_IOCTL_MAGIC, 22, \ + struct fbxatm_pppoa_vcc_params) + + + +/* + * 2684 related + */ +enum fbxatm_2684_encap { + FBXATM_E2684_VCMUX = 0, + FBXATM_E2684_LLC, +}; + +enum fbxatm_2684_payload { + FBXATM_P2684_BRIDGE = 0, + FBXATM_P2684_ROUTED, +}; + +struct fbxatm_2684_vcc_params { + struct fbxatm_vcc_id id; + + __u32 encap; + __u32 payload; + char dev_name[IFNAMSIZ]; +}; + + +#define FBXATM_2684_IOCADD _IOW(FBXATM_IOCTL_MAGIC, 30, \ + struct fbxatm_2684_vcc_params) + +#define FBXATM_2684_IOCDEL _IOW(FBXATM_IOCTL_MAGIC, 31, \ + struct fbxatm_2684_vcc_params) + +#define FBXATM_2684_IOCGET _IOWR(FBXATM_IOCTL_MAGIC, 32, \ + struct fbxatm_2684_vcc_params) + +#endif /* LINUX_FBXATM_H_ */ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/fbxbootinfo.h 2011-01-06 02:17:56.292062462 +0100 @@ -0,0 +1,11 @@ +#ifndef FBXBOOTINFO_H +#define FBXBOOTINFO_H + +struct fbx_bootinfo { + u32 bank_number; + char uboot_version_str[128]; + u32 bank0_forced; + char cefdk_version_str[256]; +} __attribute__ ((packed)); + +#endif /* FBXBOOTINFO_H */ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/fbxbridge.h 2013-06-13 15:06:42.802517113 +0200 @@ -0,0 +1,205 @@ +#ifndef _FBXBRIDGE_H +# define _FBXBRIDGE_H + +#include +#include + +#define MAX_LAN_DEVICES 4 +#define MAX_ALIASES 2 +#define MAX_SMTP_ALLOWED 3 + +#define FBXBRIDGE_PFX "fbxbridge: " + +#define FBXBRIDGE_LAN_TO_WAN 1 +#define FBXBRIDGE_WAN_TO_LAN 2 + +#define FBXBRIDGE_FLAGS_FILTER (1 << 0) +#define FBXBRIDGE_FLAGS_DHCP_PROXY (1 << 1) +#define FBXBRIDGE_FLAGS_DHCPD (1 << 2) +#define FBXBRIDGE_FLAGS_QOS (1 << 3) +#define FBXBRIDGE_FLAGS_FORBID_INTERACTIVE (1 << 4) +#define FBXBRIDGE_FLAGS_BLOCK_SMTP (1 << 5) +#define FBXBRIDGE_FLAGS_NETFILTER (1 << 6) + +/* + * ioctl command + */ + +enum fbxbridge_ioctl_cmd +{ + E_CMD_BR_CHG = 0, + E_CMD_BR_DEV_CHG, + E_CMD_BR_PARAMS, +}; + +struct fbxbridge_ioctl_chg +{ + char brname[IFNAMSIZ]; + int action; +}; + +struct fbxbridge_ioctl_dev_chg +{ + char brname[IFNAMSIZ]; + char devname[IFNAMSIZ]; + int wan; + int action; +}; + +struct fbxbridge_dev_info +{ + char name[IFNAMSIZ]; + int active; + int present; +}; + +struct fbxbridge_ioctl_params +{ + int action; + char brname[IFNAMSIZ]; + struct fbxbridge_dev_info devs[MAX_LAN_DEVICES + 1]; + unsigned int flags; + unsigned int tcp_mss_value; + unsigned int fwmark; + unsigned int stopmark; + unsigned char lan_hwaddr[ETH_ALEN]; + unsigned char have_hw_addr; + unsigned int dns1_addr; + unsigned int dns2_addr; + unsigned long ip_aliases[MAX_ALIASES]; + unsigned long smtp_allowed[MAX_SMTP_ALLOWED]; + unsigned long smtp_mask_allowed[MAX_SMTP_ALLOWED]; + + unsigned long dhcpd_renew_time; + unsigned long dhcpd_rebind_time; + unsigned long dhcpd_lease_time; + unsigned int inputmark; +}; + +struct fbxbridge_ioctl_req +{ + enum fbxbridge_ioctl_cmd cmd; + unsigned long arg; +}; + +#ifdef __KERNEL__ + +#include +#include +#include +#include + +#define ARP_RATE_LIMIT (HZ) +#define ARP_ETHER_SIZE (8 + ETH_ALEN * 2 + 4 * 2) + +struct fbxbridge; + +struct fbxbridge +{ + struct fbxbridge *next; + unsigned int refcount; + + char name[IFNAMSIZ]; + struct net_device *dev; + + /* local and remote (fbx) ip address */ + unsigned long br_ipaddr; + unsigned long br_remote_ipaddr; + + /* list of ip we consider to be local */ + unsigned long ip_aliases[MAX_ALIASES]; + + /* list of server for which we forward tcp port 25 */ + unsigned long smtp_allowed[MAX_SMTP_ALLOWED]; + unsigned long smtp_mask_allowed[MAX_SMTP_ALLOWED]; + + /* wan side inet info */ + unsigned long wan_ipaddr; + unsigned long wan_netmask; + /* this is the _client_ gw */ + unsigned long wan_gw; + + char devs_names[MAX_LAN_DEVICES + 1][IFNAMSIZ]; + struct net_device *devs[MAX_LAN_DEVICES + 1]; + int devs_mask; + struct net_device *active_lan_dev; + + unsigned char lan_hwaddr[ETH_ALEN]; + unsigned char have_hw_addr; + + unsigned int flags; + unsigned int tcp_mss_value; + unsigned int fwmark; + unsigned int stopmark; + unsigned int inputmark; + + unsigned int dns1_ipaddr; + unsigned int dns2_ipaddr; + + unsigned char dhcp_hwaddr[ETH_ALEN]; + unsigned int dhcp_use_bcast; + unsigned long last_arp_send; + + unsigned long dhcpd_renew_time; + unsigned long dhcpd_rebind_time; + unsigned long dhcpd_lease_time; +}; + +/* fbxbridge_dev.c */ +void keep_hw_addr(struct fbxbridge *br, unsigned char *hwaddr); + +/* fbxbridge_dhcp.c */ +int fbxbridge_dhcp_proxy(struct fbxbridge *br, struct sk_buff *skb, + unsigned direction); + +int fbxbridge_dhcpd(struct fbxbridge *br, struct sk_buff *skb); + + +/* fbxbridge_forward.c */ +struct sk_buff *fbxbridge_handle_frame(struct fbxbridge *br, + struct sk_buff *skb); + + +/* fbxbridge_filter.c */ +int fbxbridge_check_ip_packet(struct fbxbridge *br, struct sk_buff *skb, + unsigned direction); + +int fbxbridge_nf_hook(struct fbxbridge *br, uint8_t pf, unsigned int hook, + struct sk_buff *skb, struct net_device *in, + struct net_device *out); + +/* fbxbridge_local.c */ +void +handle_local_input_wan_frame(struct fbxbridge *br, struct sk_buff *skb); + +void +handle_local_input_lan_frame(struct fbxbridge *br, struct sk_buff *skb); + +void +handle_local_output_frame(struct fbxbridge *br, struct sk_buff *skb); + + +/* fbxbridge_output.c */ +void output_arp_frame(struct fbxbridge *br, struct net_device *dev, + unsigned short type, + unsigned long src_ip, unsigned char *src_hw, + unsigned long target_ip, unsigned char *target_hw); + +void output_lan_frame(struct fbxbridge *br, struct sk_buff *skb); + +void output_lan_mcast_frame(struct fbxbridge *br, struct sk_buff *skb); + +void output_wan_frame(struct fbxbridge *br, struct sk_buff *skb); + + +/* fbxbridge_utils.c */ +void fbxbridge_snat_packet(struct sk_buff *skb, unsigned long new_addr); + +void fbxbridge_dnat_packet(struct sk_buff *skb, unsigned long new_addr); + +void +fbxbridge_tcp_mss_adjust(struct sk_buff **skb, unsigned int mss_value); + +#endif /* ! __KERNEL__ */ + +#endif --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/fbxjtag.h 2012-07-27 19:04:58.023001668 +0200 @@ -0,0 +1,88 @@ +#ifndef FBXJTAG_H_ +# define FBXJTAG_H_ + +#ifdef __KERNEL__ +# include +#endif + +# define JTAG_RESET_STEPS 16 +# define JTAG_DATA_READ_SIZE 128 +# define JTAG_INST_READ_SIZE 128 +# define JTAG_DEF_CLOCK_DELAY 500 +# define JTAG_DEF_WAIT_TMS 0 + +enum jtag_main_state { + JTAG_STATE_TEST_MASK = 0x10, + JTAG_STATE_RUN_MASK = 0x20, + JTAG_STATE_DR_MASK = 0x40, + JTAG_STATE_IR_MASK = 0x80, +}; +#define JTAG_STATE_MASK 0xF0 + +enum jtag_sub_state { + JTAG_SUB_STATE_SELECT = 0x0, + JTAG_SUB_STATE_CAPTURE = 0x1, + JTAG_SUB_STATE_SHIFT = 0x2, + JTAG_SUB_STATE_EXIT1 = 0x3, + JTAG_SUB_STATE_PAUSE = 0x4, + JTAG_SUB_STATE_EXIT2 = 0x5, + JTAG_SUB_STATE_UPDATE = 0x6, +}; +#define JTAG_SUB_STATE_MASK 0xF + +enum jtag_state { + JTAG_STATE_UNDEF = 0, + JTAG_STATE_TEST_LOGIC_RESET = JTAG_STATE_TEST_MASK, + JTAG_STATE_RUN_TEST_IDLE = JTAG_STATE_RUN_MASK, + + JTAG_STATE_SELECT_DR = JTAG_STATE_DR_MASK | JTAG_SUB_STATE_SELECT, + JTAG_STATE_CAPTURE_DR = JTAG_STATE_DR_MASK | JTAG_SUB_STATE_CAPTURE, + JTAG_STATE_SHIFT_DR = JTAG_STATE_DR_MASK | JTAG_SUB_STATE_SHIFT, + JTAG_STATE_EXIT1_DR = JTAG_STATE_DR_MASK | JTAG_SUB_STATE_EXIT1, + JTAG_STATE_PAUSE_DR = JTAG_STATE_DR_MASK | JTAG_SUB_STATE_PAUSE, + JTAG_STATE_EXIT2_DR = JTAG_STATE_DR_MASK | JTAG_SUB_STATE_EXIT2, + JTAG_STATE_UPDATE_DR = JTAG_STATE_DR_MASK | JTAG_SUB_STATE_UPDATE, + + JTAG_STATE_SELECT_IR = JTAG_STATE_IR_MASK | JTAG_SUB_STATE_SELECT, + JTAG_STATE_CAPTURE_IR = JTAG_STATE_IR_MASK | JTAG_SUB_STATE_CAPTURE, + JTAG_STATE_SHIFT_IR = JTAG_STATE_IR_MASK | JTAG_SUB_STATE_SHIFT, + JTAG_STATE_EXIT1_IR = JTAG_STATE_IR_MASK | JTAG_SUB_STATE_EXIT1, + JTAG_STATE_PAUSE_IR = JTAG_STATE_IR_MASK | JTAG_SUB_STATE_PAUSE, + JTAG_STATE_EXIT2_IR = JTAG_STATE_IR_MASK | JTAG_SUB_STATE_EXIT2, + JTAG_STATE_UPDATE_IR = JTAG_STATE_IR_MASK | JTAG_SUB_STATE_UPDATE, + + JTAG_STATE_MAX +}; + +#define JTAG_STATE_IN_DR(state) ((state) & JTAG_STATE_DR_MASK) +#define JTAG_STATE_IN_IR(state) ((state) & JTAG_STATE_IR_MASK) + +#ifdef __KERNEL__ + +#define JTAG_BUF_SIZE 2048 + +struct fbxjtag_data { + const char *name; + struct { + struct fbxgpio_pin *tck; + struct fbxgpio_pin *tms; + struct fbxgpio_pin *tdi; + struct fbxgpio_pin *tdo; + } gpios; + unsigned long clock_delay; + unsigned long wait_tms; + unsigned long data_read_size; + unsigned long instruction_read_size; + struct device *dev; + enum jtag_state state; + char nb_reset; + char dr_buf[JTAG_BUF_SIZE]; + unsigned dr_w; + unsigned dr_r; + char ir_buf[JTAG_BUF_SIZE]; + unsigned ir_r; + unsigned ir_w; +}; +#endif + +#endif /* !FBXJTAG_H_ */ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/fbxmtd_map_ioctl.h 2012-11-30 16:14:28.306661642 +0100 @@ -0,0 +1,52 @@ +/* + * fbxmtd_map_ioctl.h for linux-freebox + * Created by on Thu Feb 8 20:37:28 2007 + * Freebox SA + */ + +#ifndef FBXMTD_MAP_IOCTL_H +# define FBXMTD_MAP_IOCTL_H + +/* + * IOCTL interface + */ +#define FBXMTD_MINOR 242 + +#define FBXMTD_MAP_IOCTL_MAX_DEV 2 +#define FBXMTD_MAP_IOCTL_MAX_PART 16 + +struct fbxmtd_map_ioctl_part +{ + char name[32]; + uint32_t offset; + uint32_t size; + uint32_t flags; +}; + +struct fbxmtd_map_ioctl_dev +{ + char name[32]; + uint32_t base_phys; + int bus_width; + uint32_t size; + uint32_t status; + struct fbxmtd_map_ioctl_part parts[FBXMTD_MAP_IOCTL_MAX_PART]; + int num_parts; +}; + +#define FBXMTD_MAP_IOCTL_NR 0x42 + +struct fbxmtd_map_ioctl_query +{ + uint32_t cmd; + uint32_t param; + int result; + void __user *user_buf; + uint32_t user_buf_size; +}; + +#define FBXMTDCTL_CMD_GET_DEVICES 0x1 +#define FBXMTDCTL_CMD_ADD_DEVICE 0x2 +#define FBXMTDCTL_CMD_DEL_DEVICE 0x3 + +#endif /* !FBXMTD_MAP_IOCTL_H */ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/fbxprocfs.h 2011-01-06 02:17:56.292062462 +0100 @@ -0,0 +1,45 @@ +#ifndef FBXPROCFS_H_ +#define FBXPROCFS_H_ + +#include +#include + +struct fbxprocfs_client +{ + const char *dirname; + struct module *owner; + struct proc_dir_entry *dir; + atomic_t refcount; + struct list_head list; +}; + +struct fbxprocfs_ro_desc { + char *name; + unsigned long id; + int (*rfunc)(char *, char **, off_t, int, int *, void *); +}; + +struct fbxprocfs_rw_desc { + char *name; + unsigned long id; + int (*rfunc)(char *, char **, off_t, int, int *, void *); + int (*wfunc)(struct file *, const char *, unsigned long, void *); +}; + +struct fbxprocfs_client *fbxprocfs_add_client(const char *dirname, + struct module *owner); + +int fbxprocfs_remove_client(struct fbxprocfs_client *client); + + +int +fbxprocfs_create_entries(struct fbxprocfs_client *client, + const struct fbxprocfs_ro_desc *ro_desc, + const struct fbxprocfs_rw_desc *rw_desc); + +int +fbxprocfs_remove_entries(struct fbxprocfs_client *client, + const struct fbxprocfs_ro_desc *ro_desc, + const struct fbxprocfs_rw_desc *rw_desc); + +#endif /* FBXPROCFS_H_ */ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/include/linux/fbxserial.h 2012-11-30 16:07:20.354641726 +0100 @@ -0,0 +1,122 @@ +#ifndef FBXSERIAL_H_ +#define FBXSERIAL_H_ + +#include +#include + +/* + * some part of serial may vary, we use abstract struct to store this, + * data content depends on type. + */ +#define EXTINFO_SIZE 128 +#define EXTINFO_MAX_COUNT 16 + +/* + * extdev desc + */ +#define EXTINFO_TYPE_EXTDEV 1 + +#define EXTDEV_TYPE_BUNDLE 1 +#define EXTDEV_TYPE_MAX 2 + +struct fbx_serial_extinfo { + u32 type; + + union { + /* extdev */ + struct { + u32 type; + u32 model; + char serial[64]; + } extdev; + + /* raw access */ + unsigned char data[EXTINFO_SIZE]; + } u; +} __attribute__ ((packed));; + + +/* + * master serial structure + */ + +#define FBXSERIAL_VERSION 1 + +#define FBXSERIAL_MAGIC 0x2d9521ab + +#define MAC_ADDR_SIZE 6 +#define RANDOM_DATA_SIZE 32 + +/* + * this is the maximum size we accept to check crc32 against, so + * structure may no grow larger than this + */ +#define FBXSERIAL_MAX_SIZE 8192 + +struct fbx_serial { + u32 crc32; + u32 magic; + u32 struct_version; + u32 len; + + /* board serial */ + u16 type; + u8 version; + u8 manufacturer; + u16 year; + u8 week; + u32 number; + u32 flags; + + /* mac address base */ + u8 mac_addr_base[MAC_ADDR_SIZE]; + + /* mac address count */ + u8 mac_count; + + /* random data */ + u8 random_data[RANDOM_DATA_SIZE]; + + /* last update of data (seconds since epoch) */ + u32 last_modified; + + /* count of following extinfo tag */ + u32 extinfo_count; + + /* beginning of extended info */ + struct fbx_serial_extinfo extinfos[EXTINFO_MAX_COUNT]; + +} __attribute__ ((packed)); + + +/* + * default value to use in case magic is wrong (no cksum in that case) + */ +static inline void fbxserial_set_default(struct fbx_serial *s) +{ + memset(s, 0, sizeof (*s)); + s->magic = FBXSERIAL_MAGIC; + s->struct_version = FBXSERIAL_VERSION; + s->len = sizeof (*s); + s->manufacturer = '_'; + memcpy(s->mac_addr_base, "\x00\x07\xCB\x00\x00\xFD", 6); + s->mac_count = 1; +} + +void +fbxserialinfo_get_random(unsigned char *data, unsigned int len); + +void +fbxserialinfo_get_mac_addr(unsigned char *data); + +int +fbxserialinfo_read(void *data, struct fbx_serial *out); + +struct fbx_serial *fbxserialinfo_get(void); + +/* + * implemented in board specific code + */ +const struct fbx_serial *arch_get_fbxserial(void); + +#endif /* FBXSERIAL_H_ */ diff -Nruw linux-3.2.13-fbx/include/linux/hdmi-cec./dev.h linux-3.2.13-fbx/include/linux/hdmi-cec/dev.h --- linux-3.2.13-fbx/include/linux/hdmi-cec./dev.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/hdmi-cec/dev.h 2013-06-13 15:06:42.806517111 +0200 @@ -0,0 +1,30 @@ +#ifndef __HDMI_CEC_DEV_H +#define __HDMI_CEC_DEV_H + +#include +#include + +#define CEC_IOCTL_BASE 'C' + +#define CEC_SET_LOGICAL_ADDRESS _IOW(CEC_IOCTL_BASE, 0, int) +#define CEC_SEND_MESSAGE _IOW(CEC_IOCTL_BASE, 1, int) +#define CEC_RECV_MESSAGE _IOWR(CEC_IOCTL_BASE, 2, struct cec_msg) +#define CEC_RESET_DEVICE _IOW(CEC_IOCTL_BASE, 3, int) +#define CEC_GET_COUNTERS _IOR(CEC_IOCTL_BASE, 4, struct cec_counters) +#define CEC_SET_RX_MODE _IOW(CEC_IOCTL_BASE, 5, enum cec_rx_mode) + +#define CEC_MAX_DEVS (10) + +#ifdef __KERNEL__ + +struct cec_device; + +int __init cec_dev_init(void); +void __exit cec_dev_exit(void); + +int cec_create_dev_node(struct cec_device *dev); +void cec_remove_dev_node(struct cec_device *dev); + +#endif /* __KERNEL__ */ + +#endif /* __HDMI_CEC_DEV_H */ diff -Nruw linux-3.2.13-fbx/include/linux/hdmi-cec./hdmi-cec.h linux-3.2.13-fbx/include/linux/hdmi-cec/hdmi-cec.h --- linux-3.2.13-fbx/include/linux/hdmi-cec./hdmi-cec.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/hdmi-cec/hdmi-cec.h 2013-06-13 15:06:42.806517111 +0200 @@ -0,0 +1,257 @@ +/* + * Header for the HDMI CEC core infrastructure + */ +#ifndef __HDMI_CEC_H +#define __HDMI_CEC_H + +#include +#include + +/* Common defines for HDMI CEC */ +#define CEC_BCAST_ADDR (0x0f) +#define CEC_ADDR_MAX CEC_BCAST_ADDR + +#define CEC_MAX_MSG_LEN (16) /* 16 blocks */ + +/** + * struct cec_msg - user-space exposed cec message cookie + * @data: cec message payload + * @len: cec message length + * @timeout: signed 32-bits timeout value in seconds + * @flags: optionnal flag field + */ +struct cec_msg { + __u8 data[CEC_MAX_MSG_LEN]; + __u8 len; + __s32 timeout; + __u32 flags; +}; + +#define CEC_MSG_NONBLOCK (1 << 0) +#define CEC_MSG_BLOCK (1 << 1) + +/* Counters */ + +/** + * struct cec_rx_counters - cec adpater RX counters + * @inv_start_bit: number of invalid start bit detected + * @ack: number of frames acknowledged + * @timeout: number of timeouts + * @bytes: number of bytes received + * @error: number of general purpose errors + */ +struct cec_rx_counters { + __u32 inv_start_bit; + __u32 ack; + __u32 timeout; + __u32 bytes; + __u32 error; +}; + +/** + * struct cec_tx_counters - cec adapter TX counters + * @busy: number of busy events while attempting transmission + * @bytes: number of bytes transfered + * @error: number of general purpose errors + * @retrans: number of retransmissions + * @arb_loss: number of arbitration losses + */ +struct cec_tx_counters { + __u32 busy; + __u32 bytes; + __u32 error; + __u32 retrans; + __u32 arb_loss; +}; + +/** + * struct cec_counters - tx and rx cec counters + * @rx: struct cec_rx_counters + * @tx: struct cec_tx_counters + */ +struct cec_counters { + struct cec_rx_counters rx; + struct cec_tx_counters tx; +}; + +/** + * enum cec_rx_mode - cec adapter rx mode + * @CEC_RX_MODE_DEFAULT: accept only unicast traffic + * @CEC_RX_MODE_ACCEPT_ALL: accept all incoming RX traffic (sniffing mode) + * @CEC_RX_MODE_MAX: sentinel + */ +enum cec_rx_mode { + CEC_RX_MODE_DEFAULT = 0, + CEC_RX_MODE_ACCEPT_ALL, + CEC_RX_MODE_MAX +}; + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct cec_driver; + +#define CEC_HW_HAS_COUNTERS (1 << 0) /* HW counts events */ +#define CEC_HW_HAS_RX_FILTER (1 << 1) /* HW has receive filter */ + +/** + * struct cec_driver_ops - cec driver low-level operations + * @set_logical_address: callback to set the logical address + * @send: callback to send a cec payload + * @reset: callback to reset the hardware + * @get_counters: callback to get the counters (if supported by HW) + * @set_rx_mode: callback to set the receive mode + * @attach: callback to attach the host to the device + * @detach: callbackt to detach the host from the device + */ +struct cec_driver_ops { + int (*set_logical_address)(struct cec_driver *, const u8); + int (*send)(struct cec_driver *, const u8 *, const u8); + int (*reset)(struct cec_driver *); + int (*get_counters)(struct cec_driver *d, struct cec_counters *); + int (*set_rx_mode)(struct cec_driver *, enum cec_rx_mode); + int (*attach)(struct cec_driver *); + int (*detach)(struct cec_driver *); +}; + +/** + * struct cec_driver - cec driver structure + * @name: driver name (should be unique) + * @module: module pointer for refcounting + * @driver: struct device_driver cookie for driver model + * @ops: struct cec_driver_ops pointer + * @flags: driver flags bitmask + * @lock: driver all-purpose mutex for exclusive locking + * @attached: driver attached to host or not + * @tx_work: transmit work queue + * @tx_msg_list: transmit message list head + * @tx_msg_list_lock: transmit lessage list lock + * @rx_msg_list: receive message list head + * @rx_msg_list_lock: receive message list lock + * @rx_msg_len: receive message queue len + * @rx_wait: receive waitqueue (used for poll, read) + * @priv: driver private pointer + */ +struct cec_driver { + const char *name; + struct module *module; + struct device_driver driver; + struct cec_driver_ops *ops; + unsigned int flags; + + /* private */ + struct mutex lock; + bool attached; + + /* transmit message list */ + struct work_struct tx_work; + struct list_head tx_msg_list; + struct mutex tx_msg_list_lock; + + /* receive message list */ + struct list_head rx_msg_list; + struct mutex rx_msg_list_lock; + unsigned int rx_msg_len; + wait_queue_head_t rx_wait; + + /* driver private cookie */ + void *priv; +}; + +static inline struct cec_driver *to_cec_driver(struct device_driver *d) +{ + return container_of(d, struct cec_driver, driver); +} + +static inline void *cec_driver_priv(struct cec_driver *d) +{ + return d->priv; +} + +int register_cec_driver(struct cec_driver *); +void unregister_cec_driver(struct cec_driver *); + +/** + * struct cec_device - CEC device main structure + * @name: device name (used to create the character device) + * @list: list node + * @major: device major number + * @minor: device minor number + * @cdev: character device node + * @dev: device structure for device/driver model interaction + * @class_dev: class device pointer + * @cec_driver: associated cec driver pointer + */ +struct cec_device { + const char *name; + struct list_head list; + int major; + int minor; + struct cdev cdev; + struct device dev; + struct device *class_dev; + struct cec_driver *cec_driver; +}; + +static inline struct cec_device *to_cec_device(struct device *d) +{ + return container_of(d, struct cec_device, dev); +} + +int register_cec_device(struct cec_device *); +void unregister_cec_device(struct cec_device *); + +/* + * CEC messages + */ +enum { + CEC_MSG_QUEUED = 0, + CEC_MSG_SENT, + CEC_MSG_COMPLETED +}; + +enum { + CEC_MSG_NO_RESP = 0, + CEC_MSG_RESP, +}; + +/** + * struct cec_kmsg - kernel-side cec message cookie + * @status: message status (QUEUED, SENT, COMPLETED) + * @ret: message sending return code + * @next: list pointer to next message + * @completion: message completion cookie + * @msg: user-side cec message cookie + */ +struct cec_kmsg { + int status; + int ret; + struct list_head next; + struct completion completion; + struct cec_msg msg; +}; + +int cec_receive_message(struct cec_driver *drv, const u8 *data, const u8 len); +int cec_dequeue_message(struct cec_driver *drv, struct cec_msg *msg); +int cec_read_message(struct cec_driver *drv, struct cec_msg *msg); +int cec_send_message(struct cec_driver *drv, struct cec_msg *msg); +int cec_reset_device(struct cec_driver *drv); +int cec_get_counters(struct cec_driver *drv, struct cec_counters *cnt); +int cec_set_logical_address(struct cec_driver *drv, const u8 addr); +int cec_set_rx_mode(struct cec_driver *drv, enum cec_rx_mode mode); +void cec_flush_queues(struct cec_driver *drv); +unsigned __cec_rx_queue_len(struct cec_driver *drv); +int cec_attach_host(struct cec_driver *drv); +int cec_detach_host(struct cec_driver *drv); + +#endif /* __KERNEL__ */ + +#endif /* __HDMI_CEC_H */ diff -Nruw linux-3.2.13-fbx/include/linux/hdmi-cec./Kbuild linux-3.2.13-fbx/include/linux/hdmi-cec/Kbuild --- linux-3.2.13-fbx/include/linux/hdmi-cec./Kbuild 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/hdmi-cec/Kbuild 2012-07-27 18:10:47.660138269 +0200 @@ -0,0 +1 @@ +header-y += hdmi-cec.h dev.h diff -Nruw linux-3.2.13-fbx/include/linux/remoti./Kbuild linux-3.2.13-fbx/include/linux/remoti/Kbuild --- linux-3.2.13-fbx/include/linux/remoti./Kbuild 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/remoti/Kbuild 2013-06-13 15:06:42.870517078 +0200 @@ -0,0 +1 @@ +header-y += remoti.h netlink.h diff -Nruw linux-3.2.13-fbx/include/linux/remoti./leds.h linux-3.2.13-fbx/include/linux/remoti/leds.h --- linux-3.2.13-fbx/include/linux/remoti./leds.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/remoti/leds.h 2012-07-27 19:04:58.027001672 +0200 @@ -0,0 +1,11 @@ +#ifndef __REMOTI_LEDS_H +#define __REMOTI_LEDS_H + +#define REMOTI_LEDS_COUNT 2 + +struct remoti_leds_pdata { + unsigned num_leds; + const char *names[REMOTI_LEDS_COUNT]; +}; + +#endif /* __REMOTI_LEDS_H */ diff -Nruw linux-3.2.13-fbx/include/linux/remoti./netlink.h linux-3.2.13-fbx/include/linux/remoti/netlink.h --- linux-3.2.13-fbx/include/linux/remoti./netlink.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/remoti/netlink.h 2013-06-13 15:06:42.882517075 +0200 @@ -0,0 +1,66 @@ +#ifndef __REMOTI_NETLINK_H +#define __REMOTI_NETLINK_H + +#include + +/* Exported attributes */ +enum { + REMOTI_ATTR_RNP_UNSPEC, + REMOTI_ATTR_RNP_CMD, + REMOTI_ATTR_RNP_STATE, + REMOTI_ATTR_RNP_CMD_FW, + REMOTI_ATTR_RNP_COUNTERS, + REMOTI_ATTR_RNP_TRANSPORT, + REMOTI_ATTR_RNP_ID, + REMOTI_ATTR_RNP_MSG, + REMOTI_ATTR_RNP_DATA, + REMOTI_ATTR_RNP_MAX, +}; + +enum { + REMOTI_CMD_RNP_UNSPEC, + REMOTI_CMD_RNP_GET_STATE, + REMOTI_CMD_RNP_NEW_STATE, + REMOTI_CMD_RNP_SEND_CMD, + REMOTI_CMD_RNP_RELOAD_FW, + REMOTI_CMD_RNP_GET_STATS, + REMOTI_CMD_RNP_GET_TRANSPORT, + REMOTI_CMD_RNP_FW_PROGRESS, + REMOTI_CMD_RNP_DATA, + REMOTI_CMD_RNP_PAIR_CNF, + REMOTI_CMD_RNP_MAX, +}; + +enum { + REMOTI_TYPE_UNSPEC, + REMOTI_TYPE_U8, + REMOTI_TYPE_INT, + REMOTI_TYPE_STATS, + REMOTI_TYPE_STRING, + REMOTI_TYPE_RNP_CMD, + REMOTI_TYPE_RNP_ID, + REMOTI_TYPE_MSG, + REMOTI_TYPE_DATA, + REMOTI_TYPE_MAX, +}; + +/* Nested attributes */ +enum { + REMOTI_TYPE_RNP_CMD_UNSPEC, + REMOTI_TYPE_RNP_CMD_ARGS, + REMOTI_TYPE_RNP_CMD_MAX, +}; + +#define RTI_FW_PROGRESS_STEP (1) + +#ifdef __KERNEL__ + +int remoti_netlink_register(void); +void remoti_netlink_unregister(void); + +int remoti_mcast_msg(const int cmd, const int type, + const void *arg, size_t len); + +#endif + +#endif /* __REMOTI_NETLINK_H */ diff -Nruw linux-3.2.13-fbx/include/linux/remoti./remoti.h linux-3.2.13-fbx/include/linux/remoti/remoti.h --- linux-3.2.13-fbx/include/linux/remoti./remoti.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/remoti/remoti.h 2013-06-13 15:06:42.882517075 +0200 @@ -0,0 +1,309 @@ +#ifndef __REMOTI_H +#define __REMOTI_H + +#include +#ifdef __KERNEL__ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#endif + +enum rnp_states { + RNP_STATE_UNSPEC, + RNP_STATE_READY, + RNP_STATE_FW_DOWNLOADING, + RNP_STATE_FW_FAILED, + RNP_STATE_PAIRING_FAILED, + RNP_STATE_MAX, +}; + +/* + * RTI definitions + */ +#define NPI_SYS_RES0 0 +#define NPI_SYS_SYS 1 +#define NPI_SYS_MAC 2 +#define NPI_SYS_NWK 3 +#define NPI_SYS_AF 4 +#define NPI_SYS_ZDO 5 +#define NPI_SYS_SAPI 6 +#define NPI_SYS_UTIL 7 +#define NPI_SYS_DBG 8 +#define NPI_SYS_APP 9 +#define NPI_SYS_RCAF 10 +#define NPI_SYS_RCN 11 +#define NPI_SYS_RCN_CLI 12 +#define NPI_SYS_BOOT 13 +#define NPI_SYS_MAX 14 +#define NPI_SYS_MASK 0x1F + +#define NPI_MAX_FRAME_LEN 128 +#define NPI_MAX_MSG_LEN 123 + +#define NPI_POLL 0 +#define NPI_SREQ 1 +#define NPI_AREQ 2 +#define NPI_SRSP 3 +#define NPI_TYPE_MASK 3 +#define NPI_TYPE_SHIFT 5 + +/* + * RCAF RPCs + */ +#define RTI_READ_ITEM 0x01 +#define RTI_WRITE_ITEM 0x02 + +#define RTI_INIT_CNF 0x01 +#define RTI_INIT_REQ 0x03 + +#define RTI_PAIR_CNF 0x02 +#define RTI_PAIR_REQ 0x04 + +#define RTI_ALLOW_PAIR_CNF 0x04 +#define RTI_ALLOW_PAIR_REQ 0x06 + +#define RTI_STANDBY_REQ 0x07 +#define RTI_STANDBY_CNF 0x06 + +#define RTI_RECEIVE_DATA_CNF 0x03 +#define RTI_RECEIVE_DATA_IND 0x05 + +#define RTI_ENABLE_SLEEP_REQ 0x09 +#define RTI_ENABLE_SLEEP_CNF 0x08 + +#define RTI_DISABLE_SLEEP_REQ 0x0A +#define RTI_DISABLE_SLEEP_CNF 0x09 + +#define RTI_UNPAIR_REQ 0x0B +#define RTI_UNPAIR_CNF 0x0A + +#define RTI_ALLOW_PAIR_ABRT_REQ 0x0D + +#define RTI_SB_RELOAD 0x10 + +/* Test-mode only */ +#define RTI_RESET_REQ 0x13 +#define RTI_TEST_MODE_REQ 0x11 +#define RTI_TEST_RX_CNT_REQ 0x12 + +#define RTI_CLEAR_TABLE_REQ 0x19 +#define RTI_CLEAR_TABLE_CNF 0x18 + +/* + * Serial bootloader RPCs + */ +#define RTI_SB_HSK_REQ 0x04 +#define RTI_SB_WRITE_REQ 0x01 +#define RTI_SB_READ_REQ 0x02 +#define RTI_SB_ENABLE_REQ 0x03 + +#define RTI_SB_FLASH_WORD 4 + +/* common error codes (see RemoTI API) */ +#define RTI_SUCCESS 0x00 +#define RTI_ERR_INV_INDEX 0xF9 +#define RTI_ERR_INV_PARAM 0xE8 +#define RTI_ERR_UNSUP_ATTR 0xF4 +#define RTI_ERR_NOT_PERM 0xB4 +#define RTI_ERR_NO_ORG_CAP 0xB0 +#define RTI_ERR_NO_REC_CAP 0xB1 +#define RTI_ERR_NO_RESP 0xB3 +#define RTI_ERR_DUP_PAIR 0xB5 +#define RTI_ERR_FRAME_CNT_EXP 0xB6 +#define RTI_ERR_DISC_ERR 0xB7 +#define RTI_ERR_DISC_TIMEO 0xB8 +#define RTI_ERR_OOM 0xBE +#define RTI_ERR_PAIR_TIMEO 0x23 +#define RTI_ERR_UNK_STATUS 0x20 +#define RTI_ERR_OSAL_NO_TIMER 0x08 +#define RTI_ERR_OSAL_NV_FAILED 0x0A +#define RTI_ERR_OSAL_NV_UNINIT 0x09 +#define RTI_ERR_OSAL_NV_BAD 0x0C +#define RTI_ERR_MAC_EXP 0xF0 +#define RTI_ERR_MAC_OVF 0xF1 +#define RTI_ERR_MAC_NO_RES 0x1A +#define RTI_ERR_MAC_BAD_STATE 0x19 +#define RTI_ERR_MAC_CHAN_ACC 0xE1 +#define RTI_ERR_MAC_NO_ACK 0xE9 +#define RTI_ERR_MAC_BCN 0xE0 +#define RTI_ERR_MAC_PAN_ID 0xEE +#define RTI_ERR_MAC_SCAN 0xFC +#define RTI_ERR_FAIL_DISC 0x21 +#define RTI_ERR_FAIL_PAIR 0x22 +#define RTI_ERR_NO_PAIR_IDX 0xB2 +#define RTI_ERR_PAIR_COMP 0x24 +#define RTI_ERR_SYNC_TIMEO 0xFF + +struct remoti_msg { + __u8 type; + __u8 subsys; + __u8 cmd; + __u8 len; + __u8 flags; + __u8 *data; + __u8 reply[NPI_MAX_MSG_LEN]; +}; + +#define REMOTI_MSG_DATA (offsetof(struct remoti_msg, data)) + +enum { + MSG_NO_RESP = 0, + MSG_STD_RESP, + MSG_NO_STD_RESP +}; + + +#ifdef __KERNEL__ + +/* + * Map a RemoTI error code to a standard Linux error code + */ +static inline int remoti_map_error(u8 val) +{ + switch (val) { + case RTI_SUCCESS: + case RTI_ERR_PAIR_COMP: + return 0; + + case RTI_ERR_INV_INDEX: + case RTI_ERR_INV_PARAM: + case RTI_ERR_UNK_STATUS: + case RTI_ERR_OSAL_NV_BAD: + default: + return -EINVAL; + + case RTI_ERR_UNSUP_ATTR: + return -ENOTSUPP; + + case RTI_ERR_NOT_PERM: + case RTI_ERR_MAC_BAD_STATE: + case RTI_ERR_MAC_SCAN: + return -EPERM; + + case RTI_ERR_NO_ORG_CAP: + case RTI_ERR_NO_REC_CAP: + return -ENOSPC; + + case RTI_ERR_NO_RESP: + case RTI_ERR_PAIR_TIMEO: + case RTI_ERR_MAC_NO_ACK: + case RTI_ERR_MAC_BCN: + case RTI_ERR_MAC_EXP: + case RTI_ERR_SYNC_TIMEO: + case RTI_ERR_MAC_CHAN_ACC: + case RTI_ERR_FAIL_DISC: + return -ETIMEDOUT; + + case RTI_ERR_OOM: + case RTI_ERR_OSAL_NO_TIMER: + case RTI_ERR_MAC_OVF: + case RTI_ERR_MAC_NO_RES: + return -ENOMEM; + + case RTI_ERR_OSAL_NV_FAILED: + case RTI_ERR_OSAL_NV_UNINIT: + return -EIO; + + case RTI_ERR_MAC_PAN_ID: + return -EEXIST; + } +} + +/* Commonly used structures to describe frames */ +struct rti_hdr { + u8 len; + u8 subsys; + u8 cmd; +} __packed; + +/* + * Payload starting after SOF + header + */ +#define RTI_HDR_SIZE (sizeof(struct rti_hdr)) + +struct remoti_rnp_msg { + struct remoti_msg *msg; + int status; + struct list_head next; + struct completion completion; +}; + +/* + * Values for 'status' + */ +enum { + MSG_QUEUED = 0, + MSG_SENT, + MSG_COMPLETED +}; + +struct remoti_command { + struct remoti_msg msg; + u8 fixed:1; + const char *name; + int (*cnf)(struct remoti_device *rf, + const struct remoti_msg *msg, + void *priv); + void *priv; + struct list_head cmd_list; +}; + +struct remoti_transport; + +int remoti_send_frame(struct remoti_device *rf, struct remoti_msg *msg); +int remoti_receive_frame(struct remoti_transport *tsp, + const u8 *buf, const u8 len); +int remoti_check_frame(struct remoti_transport *tsp, + const u8 *buf, const u8 len); +void remoti_transport_close(struct remoti_transport *tsp); +int remoti_reload_firmware(struct remoti_device *rf); + +int remoti_register_command(struct remoti_command *cmd); +void remoti_unregister_command(struct remoti_command *cmd); + +int remoti_register_commands(struct remoti_command *cmd, const size_t size); +void remoti_unregister_commands(struct remoti_command *cmd, const size_t size); + +struct remoti_device *remoti_get_device(int id); + +int remoti_pairing_init(void); +void remoti_pairing_exit(void); + +struct remoti_platform_data { + unsigned int reset_gpio; + unsigned int reset_polarity; +}; + +struct remoti_device { + struct platform_device *pdev; + struct list_head dev_list; + struct remoti_transport *tsp; + spinlock_t lock; + u8 state; + + /* firmware related stuff */ + struct firmware *fw; + struct workqueue_struct *workqueue; + struct delayed_work hw_init_work; + struct delayed_work hw_firmware_work; + struct mutex fw_mutex; + + struct remoti_platform_data pdata; + + struct work_struct tx_work; + struct list_head tx_msg_list; + spinlock_t tx_msg_list_lock; +}; + +#endif /* __KERNEL__ */ + + +#endif /* __REMOTI_H */ diff -Nruw linux-3.2.13-fbx/include/linux/remoti./transport.h linux-3.2.13-fbx/include/linux/remoti/transport.h --- linux-3.2.13-fbx/include/linux/remoti./transport.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/include/linux/remoti/transport.h 2013-06-13 15:06:42.882517075 +0200 @@ -0,0 +1,64 @@ +#ifndef __REMOTI_TRANSPORT_H +#define __REMOTI_TRANSPORT_H + +#ifdef __KERNEL__ + +struct remoti_stats { + uint64_t tx_bytes; + uint64_t tx_packets; + uint64_t tx_rcaf_packets; + uint64_t tx_util_packets; + uint64_t tx_boot_packets; + uint64_t tx_dropped; + uint64_t tx_no_callback; + uint64_t rx_bytes; + uint64_t rx_packets; + uint64_t rx_rcaf_packets; + uint64_t rx_boot_packets; + uint64_t rx_util_packets; + uint64_t rx_dropped; + uint64_t rx_sof_errors; + uint64_t rx_len_errors; + uint64_t rx_fcs_errors; + uint64_t rx_subsys_errors; + uint64_t rx_type_errors; + uint64_t rx_no_callback; +}; + +#include + +/* + * Internal driver states + */ +#define REMOTI_STARTED 0 +#define REMOTI_TX 1 +#define REMOTI_TX_COMPLETE 2 +#define REMOTI_RX 3 + +struct remoti_msg; + +struct remoti_transport { + struct remoti_device *rf; + int id; + const char *name; + int (*send)(struct remoti_transport *, + const struct remoti_msg *); + unsigned (*check_wakeup)(struct remoti_transport *); + int (*send_wakeup)(struct remoti_transport *); + unsigned int flags; + unsigned long state; + struct remoti_stats stats; + void *priv; +}; + +static inline struct remoti_transport *to_remoti_transport(void *priv) +{ + return container_of(priv, struct remoti_transport, priv); +} + +int remoti_transport_register(struct remoti_transport *tsp); +void remoti_transport_unregister(struct remoti_transport *tsp); + +#endif /* __KERNEL__ */ + +#endif /* __REMOTI_TRANSPORT_H */ --- /dev/null 2012-04-27 19:20:46.132017814 +0200 +++ linux-3.2.13-fbx/lib/fbxserial.c 2011-01-06 02:17:56.732113582 +0100 @@ -0,0 +1,117 @@ +#include +#include +#include +#include +#include + +#include + +#include + +#define PFX "builtin-fbxserial: " + +static void __init +fbxserialinfo_use_default(struct fbx_serial *serial) +{ + printk(KERN_WARNING PFX "warning: using default serial infos\n"); + fbxserial_set_default(serial); +} + +/* + * add trailing 0 for bundle string here. + */ +static void __init +bundle_fixup(struct fbx_serial *serial) +{ + struct fbx_serial_extinfo *p; + int i; + + for (i = 0; i < be32_to_cpu(serial->extinfo_count); i++) { + + if (i >= EXTINFO_MAX_COUNT) + break; + + p = &serial->extinfos[i]; + if (be32_to_cpu(p->type) == EXTINFO_TYPE_EXTDEV && + be32_to_cpu(p->u.extdev.type) == EXTDEV_TYPE_BUNDLE) { + int size; + + size = sizeof (p->u.extdev.serial); + p->u.extdev.serial[size - 1] = 0; + } + } +} + +/* + * called from arch code early in the boot sequence. This function + * returns 1 in case serial infos are invalid/unreadable and default + * values have been used. + */ +int __init +fbxserialinfo_read(void *data, struct fbx_serial *out) +{ + uint32_t sum; + + /* + * get partial serial data from flash/whatever. + */ + memcpy(out, data, sizeof (*out)); + + /* check magic first */ + if (be32_to_cpu(out->magic) != FBXSERIAL_MAGIC) { + printk(KERN_NOTICE PFX "invalid magic (%08x, expected %08x), " + "using defaults !\n", be32_to_cpu(out->magic), + FBXSERIAL_MAGIC); + goto out_default; + } + + /* fetch size for which we have to check CRC */ + if (be32_to_cpu(out->len) > FBXSERIAL_MAX_SIZE) { + printk(KERN_NOTICE PFX "structure size too big (%d), " + "using defaults !\n", be32_to_cpu(out->len)); + goto out_default; + } + + /* compute and check checksum */ + sum = crc32(0, data + 4, be32_to_cpu(out->len) - 4); + + if (be32_to_cpu(out->crc32) != sum) { + printk(KERN_NOTICE PFX "invalid checksum (%08x, " + "expected %08x), using defaults !\n", sum, + be32_to_cpu(out->crc32)); + goto out_default; + } + + printk(KERN_INFO PFX "Found valid serial infos !\n"); + bundle_fixup(out); + return 0; + + out_default: + fbxserialinfo_use_default(out); + bundle_fixup(out); + return 1; +} + +void +fbxserialinfo_get_random(unsigned char *data, unsigned int len) +{ + const struct fbx_serial *s; + + s = arch_get_fbxserial(); + + if (len > sizeof (s->random_data)) + len = sizeof (s->random_data); + + memcpy(data, s->random_data, len); +} +EXPORT_SYMBOL(fbxserialinfo_get_random); + +void +fbxserialinfo_get_mac_addr(unsigned char *data) +{ + const struct fbx_serial *s; + + s = arch_get_fbxserial(); + memcpy(data, s->mac_addr_base, MAC_ADDR_SIZE); +} +EXPORT_SYMBOL(fbxserialinfo_get_mac_addr); diff -Nruw linux-3.2.13-fbx/net/fbxatm./Kconfig linux-3.2.13-fbx/net/fbxatm/Kconfig --- linux-3.2.13-fbx/net/fbxatm./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/net/fbxatm/Kconfig 2012-11-30 16:07:21.194641766 +0100 @@ -0,0 +1,28 @@ +menuconfig FBXATM + tristate "Freebox Asynchronous Transfer Mode (ATM)" + +if FBXATM + +config FBXATM_REMOTE + bool + +choice + prompt "mode" + default FBXATM_STACK + +config FBXATM_STACK + bool "standard" + +config FBXATM_REMOTE_STUB + bool "remote stub" + select FBXATM_REMOTE + +endchoice + +config FBXATM_REMOTE_DRIVER + tristate "remote fbxatm driver" + depends on FBXATM_STACK + select FBXATM_REMOTE + default n + +endif diff -Nruw linux-3.2.13-fbx/net/fbxbridge./Kconfig linux-3.2.13-fbx/net/fbxbridge/Kconfig --- linux-3.2.13-fbx/net/fbxbridge./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/net/fbxbridge/Kconfig 2012-07-27 18:10:47.908138505 +0200 @@ -0,0 +1,7 @@ + +# +# Freebox bridge +# +config FBXBRIDGE + tristate "Freebox Bridge" + depends on FREEBOX_SERIALINFO diff -Nruw linux-3.2.13-fbx/security/fbxlsmjail./Kconfig linux-3.2.13-fbx/security/fbxlsmjail/Kconfig --- linux-3.2.13-fbx/security/fbxlsmjail./Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/security/fbxlsmjail/Kconfig 2012-07-27 19:04:58.131001775 +0200 @@ -0,0 +1,7 @@ +config SECURITY_FBXLSMJAIL + bool "Freebox jail Support" + depends on SECURITY + default n + help + This selects Freebox jailing LSM. + diff -Nruw linux-3.2.13-fbx/security/fbxlsmjail./Makefile linux-3.2.13-fbx/security/fbxlsmjail/Makefile --- linux-3.2.13-fbx/security/fbxlsmjail./Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-3.2.13-fbx/security/fbxlsmjail/Makefile 2012-07-27 19:04:58.131001775 +0200 @@ -0,0 +1,2 @@ + +obj-$(CONFIG_SECURITY_FBXLSMJAIL) += fbxlsmjail.o